Why is my Whirlpool fridge not cooling but freezer works?


When you find your Whirlpool refrigerator not cooling but freezer works fine a defective evaporator fan motor is a common part malfunction. This motor powers the fan that blows cold air over the refrigerator coils. Without this fan refrigerant won’t cool enough to maintain the refrigerator’s temperature.

Secondly, What causes a Whirlpool refrigerator to stop cooling? Dirty condenser coils are the most common cause for a Whirlpool refrigerator not cooling. Condenser coils dissipate heat as the refrigerant passes through them. If the coils are clogged in dirt and debris, they can’t release the heat properly.

Why is my fridge warm but my freezer cold? The most common cause for this condition is a problem with the defrost system. If the refrigerator freezer is cold but the refrigerator is warm, the evaporator fan motor might have failed. Every refrigerator has a set of coils called an evaporator. These are the coils that get cold.

Furthermore, What causes fridge to work but not freezer? Dirty condenser coils can cause cooling problems in the freezer. Unplug the refrigerator and check the condenser coils for dust and dirt buildup. … Check to see if the condenser fan works when you see the freezer not getting cold enough. The condenser won’t cool refrigerant efficiently if the condenser fan doesn’t run.

Why is my fridge warm?

Refrigerator Is Too Full

If there are too many items in your fresh food compartment, that cold air may not circulate properly, resulting in a refrigerator that’s warm. It’s fairly common for a refrigerator to feel warm if it’s overstuffed, and this problem is obviously easy to resolve.

Will unplugging a fridge reset it?

Unplug your refrigerator

Disconnect your fridge from its power source by removing the power cord from the wall outlet. You may hear some whooshing or knocking noises after you do so; that’s normal. Make sure your fridge stays unplugged for several minutes, otherwise the reset won’t work.

Is there a reset button on my Whirlpool refrigerator? Some Whirlpool refrigerators allow a soft reset. If your Whirlpool refrigerator is not functioning correctly, locate the door switches inside the refrigerator. Once you find them, press and release them. The fridge display will temporarily go blank and then kick back into normal operation.

How do you clean refrigerator coils?

Can you reset a refrigerator by unplugging it?

Unplug your refrigerator

Disconnect your fridge from its power source by removing the power cord from the wall outlet. You may hear some whooshing or knocking noises after you do so; that’s normal. Make sure your fridge stays unplugged for several minutes, otherwise the reset won’t work.

How much does it cost to fix a refrigerator that is not cooling? Ultimately, people can end up paying anywhere between $40 to $1,000. Keep in mind that the pricier repairs are not commonly done since most people will decide they are not worth it. The average low cost for a refrigerator repair is about $200, while the average high cost is around $1,000.

How much does it cost to replace an evaporator fan in a refrigerator?

Fridge Repair Cost by Type of Replacement

Part Replacement Cost (Labor Included)
Fan $120 – $150
Evaporator Coil $200 – $300
Ice Maker $350 – $500
Fridge Door $500 – $700

• 31 aug. 2021

How do I clean the coils on my fridge?

How long should a refrigerator last?

Most refrigerators are designed to last between 10 and 20 years. If you’re having any of the other problems on this list and the fridge is over ten years old, you’ll probably save more money in the long run by simply replacing it. Otherwise, you could sink money into repairs for a fridge that’s already on its way out.

How do you reset a refrigerator?

How do I reset my refrigerator compressor? How to Reset Your Refrigerator Compressor

  1. Step 1: Move the Refrigerator out from the Wall. …
  2. Step 2: Unplug the Refrigerator. …
  3. Step 3: Shut off the Control Panel. …
  4. Step 4: Plug the Refrigerator Back In. …
  5. Step 5: Reset the Temperature Settings. …
  6. Step 6: Move Your Refrigerator Back into Place. …
  7. Step 7: Wait at Least 24 Hours.

How do you diagnose a refrigerator problem?

  1. Check the temperature setting.
  2. Assure that there is enough room for air flow in the refrigerator or freezer.
  3. Check for air flow restrictions in vents.
  4. Test the temperature control.
  5. Clean the condensor coils.
  6. Check the door seals.
  7. Test the door switch.
  8. Test the defrost heater.

How long do I unplug my fridge to reset it?

Usually I would unplug it for about 5 minutes. This lets the refrigerant pressures in the system to equalize. It should also give the electronics time to reset.

Should I unplug a refrigerator that is not cooling? If the coils inside the fridge/freezer are frozen over, then the air can not circulate over the coils and the fridge/freezer will not cool. By unplugging the fridge for 24 hours, the ice melts.

What is the first thing to check when refrigerator stops working?

If Your Fridge Has Stopped and the Light is Off

As obvious as this sounds, often a fridge shuts down completely because it’s simply getting no power. The first thing to check is the breaker (in your home’s electrical service panel) of the circuit serving the fridge.

Why would fridge suddenly stop working? Typical causes are: 1) the door is left open frequently, 2) the condenser coils need cleaning, 3) the door doesn’t seal against the refrigerator box, 4) the cold control is set too cold, or 5) something is blocking the flow of cold air inside the fridge.

How do you reset a thermostat on a refrigerator?

The thermostat is designed to regulate temperature to chill food and beverages. If items don’t seem as cool as they should be, reset the refrigerator thermostat by raising it a degree. It should then turn on or restart.

What would the symptoms of a dirty coil be? One thing that will be noticeable when the evaporator coil is dirty is that your AC won’t produce air that’s as cold as it should be. When the heat transfer is reduced, the efficiency of the cooling process is impacted. If it becomes clear that the AC isn’t cooling your air, have the evaporator coil inspected.

Can dirty refrigerator coil symptoms? If the coils are dusty and dirty, the refrigerator’s compressor must work harder to cool the refrigerant, increasing it’s risk of malfunction.

You may also notice the following symptoms when your condenser coils are dirty:

  • Refrigerator not cooling.
  • Freezer cold but refrigerator warm.
  • Refrigerator runs constantly.

Can Dirty coils affect cooling in a refrigerator? When coils are dirty with dust or pet hair, the refrigeration process is hindered, which can prevent the appliance from cooling properly and efficiently. … Soon, food spoils, energy bills for running your fridge can rise up to 35%, and the appliance that should last for 12 to 14 years breaks down early.

Don’t forget to share this post.


Please enter your answer!
Please enter your name here