Make sure when you wind your drain snake into the pipe that you are rotating it the whole time. This winding motion with your drain auger helps it to make its way through corners in your pipes. If you feel your snake getting jammed on an elbow, apply steady downward pressure as you wind the cord around.
Beside this, Why won’t my snake go down the drain?
So, why won’t your drain snake go down the bathtub drain? The answer may be that you are either using the wrong kind of drain snake, or you are trying to force it through a P-trap, or you are forcing the snake cable through the pipe too quickly or the clog is just too darn big.
Likewise, How do you un kink a drain snake?
Take the snake in two hands, one at each end, and give the cable a strong jerk. this will release any remaining kinks. Push the snake through the blockage with a steady up and down motion until the snake completely breaks through. Once through lift the snake and pull the blockage up through the pipe.
Also, How do you fix a drain snake?
How do you unclog a drain if a snake doesn’t work?
If the auger still doesn`t work, call a plumber. If you can`t remove an obstruction in a sink drain by using an auger inserted into the drain, tackle the clog through the U-shaped trap under the sink. Set a bucket under the trap.May 9, 1986
20 Related Question Answers Found
Can snaking a drain make it worse?
While drain snakes can be very effective in clearing certain clogs, sometimes they can actually exacerbate a problem. For example, if your pipes are old and corroded, sticking a drain snake down there can scrape off chunks of metal, making the clog much worse and damaging your pipe.
What if snaking a drain doesn’t work?
If the auger still doesn`t work, call a plumber. If you can`t remove an obstruction in a sink drain by using an auger inserted into the drain, tackle the clog through the U-shaped trap under the sink. Set a bucket under the trap. … The water in the sink and the trap will run into the bucket.May 9, 1986
Can a drain snake get stuck?
It is extremely difficult to get a snake stuck in a drain if there is nothing wrong with the drain. If the cable gets hung up on broken pipe or roots the liability is not on the plumber.
How do you get a plumbing snake unstuck?
How do you clear a plumbing blockage?
Simply pour some hot water down your clogged drain and follow it up with equal parts baking soda and vinegar (baking soda first), cover the drain with a plug if you have one, let it sit for 20-30 minutes, then follow it up with more hot water to clear the clog.
Which way do you turn a drain snake?
Use The Drain Snake Properly First, if you have a tub screen or a hair trap covering your drain, move it out of the way. Next, slowly push the snake cable into the drain, and turn the handle in a clockwise motion as you push.
How do you unclog a stubborn drain?
– Partially fill the sink with water, then start plunging.
– Vigorously work the plunger up and down several times before quickly pulling it off the drain opening. …
– If plunging doesn’t work, grab the cable auger and go to work under the sink.
Can a drain snake break a pipe?
Drain Snakes Can Damage Pipes When a drain snake is inserted into a pipe, the end may flop around, scratching the pipe. … A drain snake used with too much force being can scratch a zinc pipe and damage the coating. This can lead to cracks or rusting in the pipes opening the door to a major problem in the future.
How do you use a snake to unclog a pipe?
– Push the end of the snake into the drain opening and turn the handle on the drum that contains the coiled-up snake. …
– Keep pushing more of the snake into the drain until you feel resistance. …
– Rotate the snake against the blockage until you feel it feed freely into the pipe.
How do you get rid of water blockage?
– Attack with boiling water. …
– Check the garbage disposal. …
– Plunge away the blockage. …
– Break it down with baking soda and vinegar. …
– Try the plumber’s snake. …
– Clean the P-trap.
How do you unclog a deep clogged?
– Remove the drain cap.
– Push the auger down into the drain and begin turning the auger handle clockwise as it goes. …
– Push the auger firmly into the clog when you encounter it in the drain pipe. …
– Pull the auger back to break apart the clog, then push it forward again. …
– Pull the auger back out of the pipe completely.
How do you unclog a drain with standing water?
– Clear all the blockage from the drain. …
– Remove all standing water from the sink or tub. …
– Clear the overflow drain if there is one, then plug it with a rag. …
– Begin plunging the drain, pushing in and out. …
– Run hot water down the drain for 5-10 minutes to clear any other blockages.
Last Updated: 18 days ago – Co-authors : 10 – Users : 4
