Remember that sealers will require multiple coatings, so you’ll probably need at least two gallons for most projects. A gallon only covers so many square feet: One gallon of sealer covers 200-300 square feet. One gallon of waterproofing covers 100-200 square feet.
400 square feet
Beside this, How many square feet does Thompson Water Seal cover?
400 square feet
Likewise, How many coats of Thompson Water Seal do I need?
2 coats
Also, How much does Thompson’s Water Seal cover?
Material Approximate Coverage (sq. ft./gal.)
——————- ———————————–
Wood: Rough Sawn 100
Wood: Smooth Finish 200
Plywood 150
Wood Shingles 100
What is the best way to apply Thompson’s Water sealer?
All Thompson’s WaterSeal products are DIY-friendly, and most need only a single application on a clean, dry deck. You can apply some products with a garden sprayer or paint roller, but for classic deck stain, a paint pad on an extension pole is best.
19 Related Question Answers Found
How often do you have to apply Thompson’s Water Seal?
one to three years
How many coats does Thompson’s Water Seal have?
Thompson’s WaterSeal Waterproofing Stains. Application: Only one coat is recommended for both Semi –Transparent & Solid. A second coat can be added if more color is desired.
How long does Thompson Water Seal last?
10 years
How warm does it have to be to apply Thompson’s Water Seal?
50°F
How much wood sealer do I need?
You’ll need about 2 gallons of stain to cover a 500-square-foot deck. Most stains come in 1-gallon containers and provide around 200 to 300 square feet of coverage per can.
Can you use a sprayer to apply Thompson’s Water Seal?
Answer: The manufacturer of Thompson Water Seal recommended that you use their product with a plastic sprayer with a brass wand, such as our Chapin Premier sprayer. … Once you are done with the product, it is recommended that you run mineral spirits through the sprayer and then water to clean it.
Can you seal wood in cold weather?
Don’t seal a deck below 50 degrees. You don’t want to begin the sealing process until you can safely guarantee the temperature will remain above 50 degrees for at least 48 hours.
How long does Thompson’s Water Seal last?
10 years
What temperature is too cold to polyurethane?
Ideal Conditions are 70 degrees F and 50-70% humidity. Refinishing furniture in a space that is below or above the 65-75 degrees F range can lead to problems, and a space below 55 degrees F is definitely too cold.
Does Thompson Water Seal need two coats?
Thompson’s WaterSeal Waterproofing Stains. Application: Only one coat is recommended for both Semi –Transparent & Solid. A second coat can be added if more color is desired. Allow the first coat to dry (approximately 2 hours) before second application.
What temperature is too cold to stain a deck?
Avoid the Cold If you’re staining your deck in the spring or fall, wait for a day with highs above 50 degrees Fahrenheit. Also, make sure freezing temperatures aren’t in the forecast for that night. If it drops below 32 degrees Fahrenheit before the stain has thoroughly dried, it can hinder the curing process.
What weather is needed to stain a deck?
You want to apply the stain when the wood surface and air are in the temperature range of 50° – 90°F. You also want to avoid the direct application of sunlight. Lastly, do not apply a stain if there is a forecast of rain in the following one to two days, or all your hard work could end up being washed away.
Last Updated: 4 days ago – Co-authors : 13 – Users : 4
