Does a refrigerator have to be on a dedicated circuit?

0
6662

In the US, under the NEC, a residential kitchen fridge is not required to be on a dedicated circuit. It is certainly a good idea and best practice, but not a requirement. A fridge can be on one of the minimum two required “small appliance branch circuits”.

Read the full answer

Most refrigerators run between 3 to 6 amps, with that said, a refrigerator can spike at peak usage up to 15 amps. … You should have refrigerators and freezers installed on a 15-20 amp dedicated 120 volt circuit.

Beside this, Can a refrigerator be on a 15 amp circuit?

Most appliance manufacturers thus recommend their refrigerators to be installed on a dedicated circuit, meaning an independent one that only serves the refrigerator, with a 15 or 20 amp circuit breaker or time-delay fuse.

Likewise, How many appliances can be on a 15 amp circuit?

Generally, homes have eight to 10 outlets on a 15 amp breaker but not all are used at the same time. Lights and outlets are normally wired on separate branch circuits, which means that the lights will be protected by a separate circuit breaker to the one which protects the outlets.

Also, How much can a 15 amp circuit handle?

A 15 Amp breaker can handle up to 1,800 Watts. A 20 Amp breaker can handle up to 2,400 Watts.

How many computers can you put on a 15 amp circuit?

if you allow 1amp per computer you should be fine, making that 10 pcs from the 10amp sockets and 15 from the 15amp socket. by doing that you are playing it safe. if its only a small lan tho spread it out and have no more than 5-6 pcs per point. 1 amp per PC is reasonable for a small system(120w), but most PCs use more.


23 Related Question Answers Found

 

How many amps does a fridge use?

6 amps

Can you plug a refrigerator into a regular outlet?

Yes, you can. Fridges aren’t required to have a dedicated line. It’s best practice, but not required. Mine was just plugged into whatever branch circuit was in the kitchen before I ran a separate circuit to serve just the range (gas, so the only draw is the sparkers and circuit board) and fridge.

Does a refrigerator need to be on a dedicated circuit?

1 Answer. In the US, under the NEC, a residential kitchen fridge is not required to be on a dedicated circuit. It is certainly a good idea and best practice, but not a requirement. A fridge can be on one of the minimum two required “small appliance branch circuits”.

What appliances need a dedicated circuit?

– Electric ranges.
– Wall ovens.
– Refrigerators.
– Large Microwaves.
– Freezers.
– Dishwashers.
– Garbage disposals.
– Toaster ovens.

What size breaker should a refrigerator be on?

Most refrigerators run between 3 to 6 amps, with that said, a refrigerator can spike at peak usage up to 15 amps. It’s best to take into consideration worst case scenarios. You should have refrigerators and freezers installed on a 15-20 amp dedicated 120 volt circuit.

Do I need a dedicated circuit for a refrigerator?

Having the refrigerator on its own dedicated circuit is the recommended best practice for homeowners. Most refrigerators run between 3 to 6 amps, with that said, a refrigerator can spike at peak usage up to 15 amps. … You should have refrigerators and freezers installed on a 15-20 amp dedicated 120 volt circuit.

How many computers can you put on a 20 amp circuit?

5-6 computers

Does a fridge need a 20 amp circuit?

A modern refrigerator requires a dedicated 20-amp, 120/125-volt circuit. You may currently have a smaller refrigerator plugged into a general lighting circuit, but during any major remodeling, a dedicated 120/125-volt circuit for the refrigerator should be installed.

How many devices can be on a 20 amp circuit?

10 receptacles

How many amps does the average computer use?

5 amps

How many fixtures can you have on a 15 amp circuit?

8 outlets

How many LED can lights on a 15 amp circuit?

Breaker Limitations Each CFL or LED bulb typically gives the same amount of light as a 60-watt incandescent bulb while drawing 10 watts or less, which is equivalent to a current draw of 1/12 amp. Thus a 15-amp circuit can safely control 180 or more fixtures that use CFL or LED bulbs.


Last Updated: 13 days ago – Co-authors : 5 – Users : 10

LEAVE A REPLY

Please enter your answer!
Please enter your name here