Experts say that the installation of a radiant fireback increases the efficiency of your fireplace by almost 50%. This fireback is half the cost of cast iron firebacks and increases the fireplace’s efficiency as well.
You can select a fireback up to the width of your fireplace’s back wall. (Sometimes that is the same width as your fireplace opening and other times the firebox tapers, so the back wall is narrower.) If for example, the back wall of your fireplace is 22 inches wide, you can safely use a fireback up to 22 inches wide.
Beside this, Do you need a fireback?
You really need a fireback if the back wall of the fireplace is damaged by the fire. … In addition, a fireback has the additional advantage that the cast iron of the fireback is warmed by the fire and the fireback therefore radiates extra heat. The heat efficiency of the fire thus becomes 50% higher.
Likewise, How do I choose a fireback?
You can select a fireback up to the width of your fireplace’s back wall. (Sometimes that is the same width as your fireplace opening and other times the firebox tapers, so the back wall is narrower.) If for example, the back wall of your fireplace is 22 inches wide, you can safely use a fireback up to 22 inches wide.
Also, How do you mount a fireback?
It is recommended to place the attachment brackets on the sides approximately 10 cm (3.9″) below the top edge of the fireback. For attachment at the top, it is recommended to place the brackets approximately 10 cm (3.9″) from the corners.
How do you measure for a fireplace insert?
To determine the right size, measure the following: opening height; opening width; opening depth (top and bottom); rear width and the depth of the hearth (area in front of fireplace). LOCATION: A fireplace insert needs to be placed in an existing masonry or factory-built fireplace with a working chimney.
15 Related Question Answers Found
Do I need a fireback?
You really need a fireback if the back wall of the fireplace is damaged by the fire. … In addition, a fireback has the additional advantage that the cast iron of the fireback is warmed by the fire and the fireback therefore radiates extra heat. The heat efficiency of the fire thus becomes 50% higher.
Do I need a fire back?
You really need a fireback if the back wall of the fireplace is damaged by the fire. … In addition, a fireback has the additional advantage that the cast iron of the fireback is warmed by the fire and the fireback therefore radiates extra heat. The heat efficiency of the fire thus becomes 50% higher.
What is the standard size of a fireplace opening?
A typical 3-foot-wide fireplace opening should only be 29 inches tall. The firebox depth should be 16 inches (not including the thickness of the decorative brick that faces the fireplace). The distance from the floor of the fireplace to the bottom of the damper should be 37 inches.
What is the purpose of a fireback?
The primary functions of a fireback are to protect the wall at the back of the fireplace and radiate heat from the fire into the room.
How big should a fireback be?
Choosing the Right Fireback The fireback should be wide enough to cover the hearth wall but leave just enough space, about 3 to 10 inches of rear wall visible. It should also not be high enough to reach the flue of the opening as it would hinder the drawing of the furnace.
How do you size a fireback?
You can select a fireback up to the width of your fireplace’s back wall. (Sometimes that is the same width as your fireplace opening and other times the firebox tapers, so the back wall is narrower.) If for example, the back wall of your fireplace is 22 inches wide, you can safely use a fireback up to 22 inches wide.
How can I make my fireplace insert more efficient?
While you can minimize heat loss by adjusting the damper and create more heat by burning the right kind of wood, the best way to turn your fireplace into an efficient room heater is to install a fireplace insert. Burn seasoned firewood. Freshly cut or green wood burns inefficiently and produces large amounts of smoke.
Do Firebacks really work?
Experts say that the installation of a radiant fireback increases the efficiency of your fireplace by almost 50%. This fireback is half the cost of cast iron firebacks and increases the fireplace’s efficiency as well.
How much does it cost to install a fireplace insert?
How much does a fireplace insert cost? Most fireplace inserts and a professional installation cost about $2,000 to $4,000, depending on the state of your existing chimney and the model you select. Some electric models cost significantly less, but they offer less heat output than wood and gas fireplace inserts.
Are all fireplaces the same size?
Fireplace inserts are not one-size-fits-all. They must be the right dimensions for your particular space, so measure the height, width and depth of your fireplace from the back wall to the front opening. Use those specs to ensure a proper fit.
Are Firebacks worth it?
Experts say that the installation of a radiant fireback increases the efficiency of your fireplace by almost 50%. This fireback is half the cost of cast iron firebacks and increases the fireplace’s efficiency as well.
How much does it cost to install a gas fireplace insert?
Since an insert is placed directly into a fireplace that is already installed in your home and uses the same chimney, the cost of installing a gas fireplace insert is comparably low. Purchasing a gas fireplace insert should cost you around $1,200. Having the unit installed can cost you around $500-$3,500.
Last Updated: 19 days ago – Co-authors : 14 – Users : 4
