If the amp fuse is blown, that is probably the reason that you aren’t getting any sound out of your car radio. In some cases, a broken wire or bad connection in the speaker wires where they pass through into a door can also cut off the sound altogether rather than just cutting off the sound to one speaker.
Common reasons for this to happen: Blown Fuse: One of the most common reasons for a car radio to stop working is a blown fuse. … Wiring Short: If one of the wires (or more than one) has shorted out in the audio system, you may see either erratic operation, or no operation at all.
Beside this, How do you know if a radio fuse is blown?
Likewise, Why does my sound stop working?
Hardware problems can be caused by outdated or malfunctioning drivers. Make sure your audio driver is up to date and update it if needed. If that doesn’t work, try uninstalling the audio driver (it will reinstall automatically). If that doesn’t work, try using the generic audio driver that comes with Windows.
Also, Why is there no sound coming out of my speakers?
If the wrong playback device is set as the default device, the sound doesn’t come out of the expected device (i.e., speakers or headphones). Open the Control Panel. Click or double-click the Hardware and Sound or Sound icon. In Windows XP and older, click Manage audio devices under Sound.
How do you fix a radio that won’t turn on?
– Common Car Radio Problems.
– Verify the Unit Isn’t in Protect Mode.
– Check the Fuses.
– Check the Pigtail Connector.
– Check for Power at the Head Unit.
– Check for Ground at the Head Unit.
– Bench Test the Head Unit and Replace if Needed.
23 Related Question Answers Found
How do you check a radio fuse?
Check the fuse diagram. To locate the radio fuse, refer to the owner’s manual or the diagram on the reverse side of the fuse block cover. There will typically be a drawing of the fuse block that identifies fuses by function and amperage rating (15, 20, 25 or 30 amp fuses).
Why has my sound suddenly stopped working?
Check Sound Settings Besides checking whether your speakers are muted or volume is turned up, you can check to ensure your devices aren’t disabled. To do this, click Start > Settings > System > Sound. Select your device and then click Device properties for your input and output devices.
How do I get my sound back?
– Open the Activities overview and start typing Sound.
– Click on Sound to open the panel.
– Under Output, change the Profile settings for the selected device and play a sound to see if it works. You might need to go through the list and try each profile.
How do you fix a blown fuse in a car radio?
– Locate your car’s fuse panel. …
– Take off the fuse panel’s cover. …
– Locate the blown fuse. …
– Remove the broken fuse. …
– Insert a replacement fuse of the correct amperage—make note of the fuse panel and your owner’s manual on this one. …
– Keep a few extra fuses of various amperages in your glove box.
Why did my car radio suddenly stop working?
Blown Fuse: One of the most common reasons for a car radio to stop working is a blown fuse. If the radio itself will not turn on, chances are good that there’s one or more blown fuses causing the problem. … A damaged antenna means that your radio isn’t able to receive signal from stations.
How do you know if your car radio is blown?
– Distortion at Medium Volumes. The hissing or fuzzy sound of distortion is a common sign of partially blown speakers. …
– No Vibration. …
– Lack of Range. …
– Rattling and Popping Sounds. …
– Car Radio Isn’t Working. …
– Infinite Impedance. …
– Repairing Minor Damage.
How much does it cost to fix a radio fuse?
The cost to have a fuse replaced depends on the style of fuse used in the make and model, and the power requirement. Most common fuses are only $10 to $20, although some specialty fuses are more than $100 to replace, in addition to diagnostic costs.
What do you do if your radio won’t turn on?
– Common Car Radio Problems.
– Verify the Unit Isn’t in Protect Mode.
– Check the Fuses.
– Check the Pigtail Connector.
– Check for Power at the Head Unit.
– Check for Ground at the Head Unit.
– Bench Test the Head Unit and Replace if Needed.
Why is no sound coming out of my speakers?
Improper audio settings in your computer can also cause your speakers plugged in but no sound. So you should check the following audio settings to fix your sound problem. To do so: Right click the volume icon at the bottom right corner, and click Playback devices.
How do you fix a blown radio fuse?
– Locate your car’s fuse panel. …
– Take off the fuse panel’s cover. …
– Locate the blown fuse. …
– Remove the broken fuse. …
– Insert a replacement fuse of the correct amperage—make note of the fuse panel and your owner’s manual on this one. …
– Keep a few extra fuses of various amperages in your glove box.
Why does my radio have no sound?
Typically when a car stereo produces no sound it’s usually caused by a shorted or grounded wire, defective speakers, faulty head unit/fuses, or setup is not yet complete with your radio unit.
How do I reset my car radio?
– Ensure the stereo is actually locked by switching on the car and taking note of what the stereo displays. …
– Open the car’s user manual to obtain the four-digit code needed to reset the stereo. …
– Follow the instructions as specified in the user manual to correctly input the four code.
Last Updated: 13 days ago – Co-authors : 5 – Users : 4
