If the clockspring isn’t working, the airbag won’t deploy. … Another, less-common reason the air bag or SRS light comes on is because the car may have been in an accident that triggered the car’s crash sensors but, perhaps, not to the point of deploying the air bag. In these cases, the air bag needs to be properly reset.
Is It Safe to Drive with My SRS Light On? While you can certainly drive while your SRS light is on, it isn’t safe. You should get your vehicle to a service center as soon as possible so that a technician can inspect your SRS computer.
Beside this, Is it safe to drive with the SRS light on?
Is it safe to drive with an SRS light on? … It doesn’t necessarily mean that the car isn’t safe to drive but it’s like playing with fire if you do. When this light is on it means your safety system isn’t working at 100% and in some cases, it could mean that your airbags are disabled and will not deploy in an accident.
Likewise, How do I get the SRS light off?
– Put the key into the ignition and turn the switch to the “on” position.
– Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off. After it shuts off, immediately turn the switch off and wait three seconds.
– Repeat Steps 1 and 2 two more times.
Also, Can you reset airbag light without tool?
It is impossible in most car models to reset the airbag light without a scanner. This is for safety cautions because you should always repair the fault after the airbag light occurred. Luckily, in many car models, the airbag light will also go away by itself if you have repaired the problem.
What do I do if my SRS light comes on?
When you turn the ignition key to the “ON” position, the SRS light should come on momentarily, then extinguish. If the SRS light stays on, there’s a problem with the system and the air bags may not deploy in the event of a crash. You’ll want to seek professional diagnosis and repair as soon as possible.
23 Related Question Answers Found
Will disconnecting battery reset airbag light?
Often, all it takes to get rid of that pesky warning light is to reset your airbag sensor. … Remove the terminal clamp and leave it disconnected for 5-10 seconds to allow the airbag sensor to reset. Then reconnect the battery terminal and turn the vehicle on. With a bit of luck, the light will stay off.
How do I fix my SRS light?
– Put the key into the ignition and turn the switch to the “on” position.
– Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off. After it shuts off, immediately turn the switch off and wait three seconds.
– Repeat Steps 1 and 2 two more times.
What causes SRS light to stay on?
If the SRS light stays on or starts flashing on and off, you may have a problem with the airbags themselves, a loose wire, a faulty seat belt buckle, or a problem with the Engine Control Unit (ECU) that is causing the airbag warning light to stay on.
How do I get my airbag light to turn off?
– Put the key into the ignition and turn the switch to the “on” position.
– Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off. After it shuts off, immediately turn the switch off and wait three seconds.
– Repeat Steps 1 and 2 two more times.
What can cause the airbag light to come on?
It may be an issue with your seat belt sensor. Sometimes the sensor that detects whether you have fastened your seat belts can become faulty. When this happens, it can trigger the airbag light to come on.
How much does it cost to fix airbag light?
The average airbag sensor cost is $250 to $350 for the sensor part. If you are planning on having a mechanic replace the sensor then you are going to have to pay the mechanic a labor cost as well so keep that in mind.
How do I reset my airbag light?
– Put the key into the ignition and turn the switch to the “on” position.
– Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off. After it shuts off, immediately turn the switch off and wait three seconds.
– Repeat Steps 1 and 2 two more times.
Is there a fuse for the airbag light?
The airbags won’t be activated by the fuse. The whole system on most cars is inoperative if the service air bag light is on.
What can cause SRS light to come on?
You have a bad SRS computer Factors such as age, heat, vibration and water damage can cause the computer to fail and turn on the warning light. Solution: Replace the SRS computer and reset the system. Review your SRS warranty to see if some or all of the repair costs may be covered.
How much does it cost to fix airbag sensor?
The average cost for air bag crash sensor replacement is between $372 and $388. Labor costs are estimated between $61 and $77 while parts are priced at $311. This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.
Is it safe to drive a car with the airbag light on?
It is not safe to drive with the airbag light ON. When the light is on, it means that there is a problem with the airbag system. When there is a problem with the system, it will not deploy the airbags at all in an accident. … If you have an error in your airbag control unit, your airbag will not work in a collision.
Can low battery cause airbag light?
The battery itself gets some of that electricity to recharge. A bad battery will affect he voltage regulator and alternator. … This will cause other electrical problems throughout the car, which may include your airbag sensors. A bad airbag sensor will cause your airbag light to turn on.
Last Updated: 20 days ago – Co-authors : 8 – Users : 5
