- How much does a ton of limestone cover?
- For a thickness of 4 inches or around 10 cm, a ton of limestone can cover an area of around 4 to 5 square meters.
- If you only need an inch thick layer of limestone rock cover, you will be able to cover around 16 to 20 square meters of area.

Thus, How do you calculate limestone tonnage? Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 21.6 (the amount of cubic feet in a ton). The final figure will be the estimated amount of tons required.

Additionally How many square feet does a pallet of limestone cover? Stone Coverage A typical pallet of 1.5″ limestone will cover an average of 180 square feet.

How many square feet is a ton of limestone? Calculate #3 Limestone

Coverage (Square feet) | 400 |
sq ft |
---|---|---|

Volume (Cubic yards) | 2.5 | cu yd |

Estimated amount (Pounds) | 5,951 | lb |

Estimated amount (Tons) | 2.98 | ton |

Amount +15% compression | 3.42 | ton |

How many square feet will 5 tons of gravel cover? How many square feet does 5 tons of gravel cover:– typically, 5 tons of gravel will cover approximately 540 square feet or 60 square yards or 50 square meters area for standard 2 inch depth. A ton of gravel can cover around 108 sq ft, so 5 tons of gravel = 108 × 5 = 540 sq ft coverage.

**What is the weight of limestone?**

Limestone weighs approximately 150 pounds per cubic foot, so your 8 cubic foot block will weigh about 1200 pounds. If the mass or weight of the block intimidates you, you can start with a smaller piece by dividing it.

**How much is lime stone?**

On average, limestone countertops cost around $70 minimum per square foot installed. Prices can go all the way up to around $200 per square foot installed depending on a variety of factors.

**How many tons of stone are on a pallet?**

Longview stone Note: Most pallets of stone weigh around 1.5-2 tons. Covers about 100 square feet 2″ thick per yard.

**How much will a pallet of stone cover?**

A pallet of stone covers 100 feet (if you want to lay 3 stones high, 33 feet will be covered with 1 pallet; 2 stones high, 50 feet).

**How much does a pallet of chopped limestone weigh?**

A: Most pallets way between 1.5 and 2 tons (3000 to 4000 pounds) depending on the type and thickness of the stone.

**How many square feet will a ton of limestone cover?**

***Square foot coverage per ton ***

Dry stacks | |
---|---|

4″x6″, 6″x6″, 8″x6″ | 30 Sq. Ft Per Ton |

4″x8″ 6″x8″, 8″x8″, 10″x8″ | 20 – 23 Sq. Ft Per Ton |

4″x10″, 6″x10″, 8″x10″ 10″x10″, 12″x10″ | 15 – 17 Sq. Ft Per Ton |

4″x12″, 6″x12″, 8″x12″, 10″x12″ 12″x12″ | 10 – 12 Sq. Ft Per Ton |

**How many sq ft does a ton of limestone cover?**

***Square foot coverage per ton ***

Dry stacks | |
---|---|

4″x6″, 6″x6″, 8″x6″ | 30 Sq. Ft Per Ton |

4″x8″ 6″x8″, 8″x8″, 10″x8″ | 20 – 23 Sq. Ft Per Ton |

4″x10″, 6″x10″, 8″x10″ 10″x10″, 12″x10″ | 15 – 17 Sq. Ft Per Ton |

4″x12″, 6″x12″, 8″x12″, 10″x12″ 12″x12″ | 10 – 12 Sq. Ft Per Ton |

**How many yards are in a ton of limestone?**

Crushed Limestone As a result, 1 yard of crushed limestone equals 1.22 tons. So, 0.82 cubic yards of limestone is included in one tonne of crushed limestone.