20 to 25 feet
When supporting joists that span 12 feet with no overhang beyond the beam, a double ply beam can span in feet a value equal to its depth in inches. A double 2×12 beam can span 12 feet; a (2) 2×10 can span 10 feet and so on.
Beside this, How much weight can an 8×8 support?
64,000 pounds
Likewise, How far can a beam span without support?
People also ask, how far can a 2×8 span without support? In general terms, joists spaced 16 inches on center can span 1.5 times in feet their depth in inches. A 2×8 up to 12 feet; 2×10 to 15 feet and 2×12 to 18 feet.
Also, How far can a 4 ply 2×10 beam span?
You will see that a 4-ply, 2 X 12 can span a maximum of 13′ while supporting 12′ joists on either side of it.
Can a 2×10 span 20 feet?
Douglas fir 2-by-10 joists graded as “Structural Select” allows joist spans up to 21 feet for a live load of 30 pounds per square foot when spaced 12 inches apart, 19 feet 1 inch for 16 inch spacing and 16 feet 8 inches for 24 inch spacing.
18 Related Question Answers Found
How big of a beam do I need to span 20 feet?
For a 20 foot span, wood beam needs to be minimum 18 inches deep. We ended up lifting that heavy ass beam by by hand. This was about a twenty foot span, set the beam on 4″ round steel columns on 12×12 by 1/2 inch plate on block. So, if your span is 30 feet (or 360 inches) you would divide that by 20 to come to 18 feet.
How much weight can a 2×10 beam hold?
1,200 lbs.
How far can a 2×10 span for a roof?
What size beam is needed to span 22 feet?
Use one 22′ long W8x48 steel beam down the center of your 22’x28′ rectangle. This steel beam is 8.5″ deep, plus a 1.5″ deep wood nailer plate, plus 0.75″ floor sheathing, means that the floor is 10.75″ at the deepest point. Then use 2×10 joists spaced at 16″ on center spanning 14′ on each side of the steel beam.
How far can a 6×12 beam span?
16′ is the furthest you can go with a 6×12 doug-fir no. 2 pressure treated beam.
How wide can a 2×10 span?
As the table shows, no 2×8’s meet the span and spacing requirements, but a 2×10 with an E of 1,300,000 psi and Fb of 1093 psi can span 15 feet 3 inches – more than enough. A 2×12 with an E of 800,000 psi and Fb of 790 psi also works, since it can span 15 feet and 10 inches.
How much weight can a 6×6 hold horizontally?
If you assume a conservative 1400psi allowable bending stress, a single 6×6 with 12′ span can support about 2000 lbs. So your double 6×6 can support at least 4000 lbs (possibly more if you do a good job bonding the two members together so that there’s no slip between the faces).
How far can a 6×6 beam span?
12 feet
How much weight can a 2×12 beam hold?
approximately 2,100 pounds
How do you know how much weight a beam can hold?
Calculate the maximum bending moment for the wooden beams. The bending moment is the length of the span times the weight to be supported divided by 8. For a beam spanning a 12-foot room and supporting a weight of 600 lbs., the maximum bending moment would be 12 x 600/8 = 900 foot-pounds.
What is the maximum span of a beam?
When supporting joists that span 12 feet with no overhang beyond the beam, a double ply beam can span in feet a value equal to its depth in inches. A double 2×12 beam can span 12 feet; a (2) 2×10 can span 10 feet and so on.
How far can you span a 2×10 beam?
In general terms, joists spaced 16 inches on center can span 1.5 times in feet their depth in inches. A 2×8 up to 12 feet; 2×10 to 15 feet and 2×12 to 18 feet.
Last Updated: 9 days ago – Co-authors : 15 – Users : 4
