You must remove the suspension springs to remove and replace the snubber. Dampening straps: Some top-loaders have four rubber straps holding the tub to the four corners of the machine. If one of these fails, the tub goes out of balance. If you have to replace one, replace all of them.
unbalanced load
Beside this, How do I fix the uL code on my Kenmore washer?
You can try to clear the Error Codes; Unplug the washer for 1 to 2 minutes. Disconnect the U.I. (touch pad). Plug the washer back in for 1 to 2 minutes.
Likewise, How do you fix a UE code on a Kenmore washer?
A UE error code on your Kenmore front-load washer means the washer won’t spin because the load is unbalanced. Fixing a UE error code can be as easy as redistributing an unbalanced load or adding a few garments to a small or single-item load.
Also, How do you reset the code on a Kenmore washing machine?
To perform the Master Reset, carefully unplug the washing machine from the power outlet and leave it unplugged for one minute. After one minute is up, plug the washer cord back into the wall. Next, open and close the door of the washing machine 6 times within 12 seconds to send a “reset” signal to all the components.
How do you fix too many suds on a washing machine?
Wipe the interior of the drum with a clean, dry cloth to remove excess soap residue and bubbles, changing it out as needed. Set the machine to a full load and allow it to fill with water before adding 2 cups of distilled white vinegar. Complete the wash cycle. Run a second rinse cycle to remove lingering residue.
18 Related Question Answers Found
How do I fix error code uL?
What causes excessive suds in washing machine?
The most common cause of excessive foam is using too much detergent or not using a quality detergent like Tide HE Turbo Clean. Tide HE Turbo Clean is specially formulated to deliver the right level of cleaning power when using the recommended dose for your load.
Why is my washing machine shaking violently?
When shock absorbers weaken or become damaged, unbalanced loads will cause the washer to shake or move and the machine will often make a loud banging sound during the spin cycle. If the symptom is not corrected, it can lead to damage to other components.
What does uL mean on washer?
Unbalanced load
How do you reset a Kenmore washing machine?
– Press the “Stop” button twice, and then press the “Power” button.
– Choose a wash cycle (e.g. “Normal”), and then choose your wash options (e.g. “Hot/Cold” or “Cold/Cold”).
– Press the “Start” button to complete the reset process and restart the washing machine.
How do I fix my uL washing machine?
UL is the code for unbalanced load. Open the lid and redistribute your wash to balance the weight of the wet items, then restart the machine. Repeat until the washer spins without thumping.
Why does my washing machine keeps unbalancing?
If one or more of the suspension rods are broken, the washer will vibrate or shake. … The suspension springs help to absorb the movement of the washer tub. If a suspension spring breaks, the tub might become unbalanced, causing it to shake and vibrate during operation.
How do I stop my washing machine from shaking?
– Check that your loads are balanced. …
– Check the the floor and machine are level. …
– Ensure You Have a Sturdy Floor. …
– Check Your Stacking Kit. …
– Purchase Washing Machine Vibration Pads. …
– Call in Some Reinforcement.
How do I stabilize my washing machine?
How do I clear the error code on my Kenmore washer?
– Look for the “Pause/Cancel” button on the washer control panel. …
– Press the “Pause/Cancel” button twice to cancel the wash cycle. …
– Check for kinks in the water supply hose while the washer does not have power.
How do you fix an unbalanced front load washer?
Why does my washing machine keep saying UE?
The uE/UE code indicates that the washer is attempting to balance the load, which may be the result of the unit not being leveled correctly or the load itself. This code can be easily resolved without the need of a technician.
Last Updated: 17 days ago – Co-authors : 8 – Users : 4
