– Go to your device’s app store and search for Vivint Classic.
– Click the download button.
– When the download is complete, open the app and login to your system using the same credentials you use on Vivint.com.
Enter the default installer PIN code (2203) 3.
Beside this, How do I add a device to my Vivint panel?
– Go to your touchscreen panel and touch the home button.
– Tap Services.
– Tap the wrench icon.
– Enter your 4-digit PIN.
– Tap Add Devices.
– At this point, go to the device you want to add (door lock, thermostats, light module, etc.).
Likewise, Why is my vivint app not working?
Log out of your mobile app and log back in. … If your connection is good, but it isn’t working, delete and reinstall your app. If neither the app nor the account center is working, go to your panel and send a command to your door locks, thermostats, or lighting modules directly from the panel.
Also, How do you open a vivint panel?
Remove the screw at the top of your panel with a screwdriver. To remove the panel cover, push the two tabs on top and pull the cover out and down. Hang the panel cover on the back plate using the white safety strip. Don’t be alarmed if you hear beeping.
How do I reset my Vivint panel?
Tap Displays, then tap on the panel you want to reboot. Tap Reboot, and then Yes to confirm.
24 Related Question Answers Found
How do I connect my Z-wave light switch to vivint?
– Go to your touchscreen panel.
– Choose Services.
– Choose the wrench icon.
– Enter your installer code. …
– Select ‘Add Device’
– At this point, go to your light switch or z-wave device and make sure it’s plugged in and powered where you want it.
How do I take the lock off my vivint?
– Remove the battery pack.
– Press and HOLD the Program button.
– Re-insert the battery pack (keep holding the Program button for 30 seconds). The lock should beep and the LED will flash red.
– Release and press the Program button once more. …
– The lock will re-initiate the handing process (extend/retract the bolt).
How do I reset my vivint screen?
Remount and power up your panel Line up the BOTTOM of the panel to the backplate and snap it back in place. Replace the top screw and plug the panel back into the wall. After 10-15 minutes, the panel should finish powering on.
Can I use vivint equipment with another company?
No Remote Access — You can’t adjust your cameras or turn them on or off unless you are at home. … Not Compatible with Other Companies — If you purchase Vivint cameras, and then decide you want some type of service plan, you have to go with Vivint. Vivint’s cameras will not tie into any other monitoring company.
How do I install Zwave on vivint?
– Go to your SkyControl panel and tap the menu button in the bottom right corner (three horizontal lines)
– Tap ‘Settings’
– Enter your master code.
– Tap ‘Installer Toolbox’
– Enter your installer code. …
– Tap ‘Z-Wave’
– Tap ‘Add Node’
How do you reset vivint?
Hardware: Press and hold the Reset button on the back of the router for 10-15 seconds, then release. Software: In the Configuration Interface, go to the Advanced tab and under the Administration tab click Factory Defaults. Then click the Restore Factory Defaults button.
How do I change the battery in my vivint doorbell?
The doorbell has a battery which can be easily replaced by taking out the old batteries which is beneath the sensor and replacing it with two CR2032 batteries.
Why is my Vivint panel offline?
Make sure the WiFi password is correctly entered in and your router is plugged into a working outlet. … If it still doesn’t show up, tap Join other network and manually enter your network name and password then tap OK. If you have multiple routers or a separate modem, make sure they’re also plugged into working outlets.
Does vivint app work without monitoring?
You can use Vivint equipment without a subscription, but you wouldn’t have the benefit of professional monitoring, couldn’t access the mobile application and won’t be able to use the 24/7 technical support service.
How do I remove the sensor from my vivint door?
If you are replacing an existing sensor, delete it from the panel with the following process: tap the three dot Menu icon in the bottom right corner then Devices, enter your PIN, tap Sensors and select the device you want to remove, then tap Delete and confirm you want to delete the sensor.
What is the installer code for vivint?
Enter the default installer PIN code (2203) 3.
How do I add another camera to vivint?
Click Video on the left, then click Settings. Scroll down and click Add Video Device. Follow the instructions on the page to add the camera. Once the camera has been added, you can disconnect your camera from your router and move it to wherever you would like in your home.
Last Updated: 7 days ago – Co-authors : 5 – Users : 11
