If your Whirlpool dryer displays a “PF” error code, indicating a recent power failure, the dryer will need to be reset and restarted. This is done by pressing “Start” for a few seconds to restart the dryer. If the dryer does not restart automatically, select a new cycle and any options then press “Start” to begin.
Typically the F70 error indicates a communication error between the touchpanel /console controls and the main control board. Whether that’s because there’s an issue with one board or the other (sometimes both if there are updates), loose terminals, in extreme cases there might be an issue with the wiring harness.
Beside this, How do I fix error code F70?
Doug, F70 means check harness connections at the machine control and at the console electronics. If your connections are fine to the machine control board and the console electronics, then you may need to change the machine control board.
Likewise, How do you reset a whirlpool tumble dryer?
If your Whirlpool dryer displays a “PF” error code, indicating a recent power failure, the dryer will need to be reset and restarted. This is done by pressing “Start” for a few seconds to restart the dryer. If the dryer does not restart automatically, select a new cycle and any options then press “Start” to begin.
Also, How do I reset my Whirlpool Duet dryer?
Close the dryer door firmly. Press and hold the “Start” button for five seconds. Check the display on the dryer for error codes. Press the “Start” button and hold for several seconds to restart the dryer if “PF” appears on the display.
How do you fix a Whirlpool dryer that won’t start?
– Make sure the dryer is correctly plugged into the proper electrical outlet.
– Check for tripped breakers or blown fuses. If needed, reset any tripped breakers and replace blown fuses.
– Avoid using an extension cord.
18 Related Question Answers Found
Does Whirlpool dryer have a reset button?
Whirlpool dryers can do many things, such as monitor moisture levels and temperature, reduce noise, periodically tumble clothes to remove wrinkles, steam clothes and adjust the overall drying time according to fabric and load size. However, one thing a Whirlpool dryer cannot do is reset itself by pushing a button.
What is the F70 code on Whirlpool washer?
The Cabrio Washer Error F70 code is the same as the OL code: This code stands for overloaded which means the control has recognized that the load in the tub is to much for the machine to handle or there is friction on the drive system not allowing the basket to disengage.
How do you troubleshoot a Whirlpool Duet dryer?
– Inspect household fuses or breakers. …
– Close the dryer door firmly. …
– Press and hold the “Start” button for five seconds. …
– Check the display on the dryer for error codes.
– Press the “Start” button and hold for several seconds to restart the dryer if “PF” appears on the display.
What does F70 mean on a Kenmore Elite dryer?
check harness connections
Does a dryer have a reset button?
Often, dryers are equipped with a reset button on the control panel. If the motor won’t run, let the dryer cool for about ten minutes. Then press this reset button.
How do I know if my Whirlpool dryer thermal fuse is blown?
Will dryer light come on if thermal fuse is blown?
A thermal fuse would keep an electric dryer from running. A thermal fuse would not prevent a gas dryer from running.
What does F70 mean on a Maytag washer?
The “F70” error code is indicating a loss of communication between the Central Control Unit (CCU) and the user’s interface board on the right hand side of the console. The main top can be taken off by removing the screws along the back edge of the top.
Why won’t my dryer start all of a sudden?
If the drum light doesn’t turn off, a failed door switch is the likely reason the dryer won’t start. A blown thermal fuse often prevents an electric dryer from starting. You’ll find the thermal fuse on the blower housing. Unplug the dryer and check the thermal fuse for continuity.
How do I reset my condenser dryer whirlpool?
– Turn on the tumble dryer main power.
– Within 10 seconds turn the program selector from off to teh 6 o’clock postion, pointing straight down.
– Push the “Start” button three times.
– Turn the program selector to the “one” position which should be the CW or airing program.
How do I clear the error code on my Whirlpool washer?
To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.
How do you clear the error code on a Maytag washer?
To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.
Last Updated: 11 days ago – Co-authors : 4 – Users : 8
