– Turn off the Ryobi trimmer. …
– Hold the spool of line in one hand and rotate the bump knob counterclockwise. …
– Remove the knob. …
– Let the trimmer come to a complete stop. …
– Locate the two opposite tabs on the sides of the spool retainer. …
– Pull up on the old spool to remove it.
Beside this, How do you change the trimmer Trimmer line?
Likewise, How do I change trimmer line?
Also, How do you change the trimmer line on a Ryobi expand it?
How do you remove the trimmer spool?
Grasp the base of the trimmer head with one hand and the cover with the other. Stretch your fingers across the top of the cover and depress the tabs located 180 degrees apart on the sides while you lift. The cover should come right off. Lift out the spool that contains the trimmer string.
17 Related Question Answers Found
How do I change the string on my head trimmer?
How do you fix the pull cord on a trimmer?
On some trimmer models, you need to wind the recoil pulley and hold it steady with a screwdriver while you feed the cord through the holes in the housing and pulley hub simultaneously. After attaching the handle and tying knots in both ends of the cord, remove the screwdriver and let the pulley slowly unwind.
How do you restring a dual line trimmer?
Are trimmer line universal?
Universal trimmer line by Rino-Tuff is a high performance trimmer line modified to outperform other residential lines. Scientifically engineered to be more durable than other residential trimmer lines.
How do you remove the string from a head trimmer?
Remove the bump knob on the bottom of the trimmer head. Depending on your make and model of trimmer, it will turn counterclockwise, have tabs to press in and pull it straight off, or remove by pressing in the tabs and turning it. Pull the trimmer line spool out of the trimmer head.
How do you remove a Ryobi expand it trimmer head?
– Invert the trimmer, and stand it vertically with the cutting head at the top.
– Loosen the “bump knob” or “bump head” by unscrewing it using a counterclockwise turning motion. …
– Remove the inner string reel from the interior of the cutting head and set it aside as well. …
– Grasp the shaft housing firmly with your left hand.
How do you open a spool on a Weedeater?
How do you remove the head of a Ryobi 18v trimmer?
– Invert the trimmer, and stand it vertically with the cutting head at the top.
– Loosen the “bump knob” or “bump head” by unscrewing it using a counterclockwise turning motion. …
– Remove the inner string reel from the interior of the cutting head and set it aside as well. …
– Grasp the shaft housing firmly with your left hand.
Can I use any trimmer line?
Generally speaking, a string trimmer uses a monofilament line to cut through grass, weeds, and small, woody plants. … Thinner spooled line, thicker pre-cut line, serrated and square lines, or even blades or chains could be used.
How do I extend my trimmer line?
Hold the trimmer head above the ground, press the trigger throttle and allow new line to automatically feed from the spool. Continue to hold the trigger throttle down until the line extends to the point where the blade on the trimmer guard trims it to length. Continue cutting grass and weeds.
Which way do you wind a string trimmer?
Wind Opposite to the Cutting Direction Wind the string in the opposite direction, because if you don’t, it will have a tendency to unwind as you’re operating the trimmer. Many trimmer heads spin clockwise and should be wound counterclockwise.
How do you change the head on a Ryobi bump feeder?
Last Updated: 14 days ago – Co-authors : 6 – Users : 8
