36 inches
7.5 to 9 feet
Beside this, Is a 6 foot pool deep enough?
Some people are concerned that they won’t have the full pool experience without 8 feet of water. However, we’ve found that most of the time, that’s not the case. Most fiberglass pools today are designed to go from the shallow end to about 6 ft. deep, which gives you the whole pool to play games.
Likewise, How deep does a pool have to be for a diving board?
7.5 to 9 feet
Also, Can you use a regular slide for a pool?
It is possible to use a playground slide for a pool. … The above ground pool’s walls may be too high for the slide to reach the water safely and effectively. Tip #1: You want to make sure the weight capacity of the playground slide will hold the weight of all the people using the slide.
Can you have a slide for an above ground pool?
If your above-ground pool is surrounded by a solid-wood deck, then a slide can be mounted with nuts and bolts. … Be sure the slide isn’t higher than the fencing around the deck, which limits your size and adult use of the slide. Also, connect a water supply to the slide to keep the surface wet.
19 Related Question Answers Found
How long do Fiberglass pools last?
25 years
Can you add a slide to an existing pool?
You can add a slide to an existing inground pool as long as you follow certain safety guidelines. And with several different slide models available, there really is something for everyone!Apr 26, 2020
How much does it cost to add a slide to a pool?
Cost. The range in cost is wide. A simple, prefabricated slide with ladder might be installed for $4,000, while some of the tantalizing slides shown here could easily top $100,000.
What are the disadvantages of a fiberglass pool?
– Limited shapes and swimming pool designs.
– No wider than 16′
– Repairs on some colored finishes do not match.
– Higher initial cost.
Do it yourself slide pool?
– Step 1: Decide On Your Slide. It’s time to think big. …
– Step 2: Make Some Plans. If you already have a hill or slope in your backyard, then you’re ahead of the game. …
– Step 3: Go Shopping! …
– Step 4: Construct the Slide Frame. …
– Step 5: Add Layers & Customize. …
– Step 6: Secure the Slide. …
– Step 7: Test It Out.
Why are pool slides so expensive?
Slides made of rotationally molded polyethylene plastic are considered a more superior material and as a result, is more expensive than fiberglass.
How deep does a pool have to be to have a slide?
36 inches
Can you install a diving board in existing concrete?
Many customers want to know if they can install a board and base in their existing concrete deck. The answer is yes but this requires drilling into the deck and using a SR Smith epoxy kit. … If this is not possible, you can purchase a board without pre-drilled holes so that you can drill the holes to match your base.
Why fiberglass pools are bad?
One of the biggest gripes that we see have to do with the slippery surface of a fiberglass pool. The fact is, this material can be so slick that pool users can actually slip and fall. This can be a real problem for pool steps, where a slip-and-fall accident can be dangerous.
What is the most expensive part of building a pool?
Hidden Cost #2: Extra Concrete The cost of additional patio is usually the most expensive option to the pool because most people get at least 300–700 extra square feet of patio beyond their initial 3–4′ border.
How much is a water slide for a pool?
Cost. The range in cost is wide. A simple, prefabricated slide with ladder might be installed for $4,000, while some of the tantalizing slides shown here could easily top $100,000.
Is a fiberglass pool worth the money?
While they cost you a bit more up front than a concrete pool, they make up for it by requiring low maintenance. You won’t have to replaster a fiberglass pool like you would with concrete, and you don’t have to worry about replacing any vinyl. But even better, fiberglass pools actually save you money.
Last Updated: 14 days ago – Co-authors : 12 – Users : 7
