In either case, adjusting the pilot light is fairly easy. You’ll just need a screwdriver and a little patience, and you can fix the issue in a matter of minutes. First, locate the controls on the bottom of a direct-vent fireplace. … On others, there will be a screw that you can easily adjust with a screwdriver.
Adjusting the Flame There is usually a small screw on the pilot valve body that will adjust the standing pilot flame. You may have to refer to the furnace manufacturer’s instructions to find the screw. Turn the screw as needed to adjust the flame throw.
Beside this, How do you adjust the pressure on a gas fireplace?
Adjusting Gas Pressure Turn it clockwise to increase pressure and counterclockwise to decrease pressure.
Likewise, Where is the pilot light adjustment screw?
A: There is a way to control the height of the pilot light flame. Next to the “Pilot” indicator on the furnace’s control switch, there is a small screw located near the pilot light-thermocouple assembly.
Also, How do I lower the flame on my gas fireplace?
How Big Should the flame be on a pilot light?
A pilot flame should be blue with a yellow tip and strong enough to cover about 1/2 inch at the end of the thermocouple tip. If the flame is too strong and adjusted wrong, it will be loud and cause improper furnace operation.
22 Related Question Answers Found
How do you adjust the pilot light on a gas log?
On some fireplaces, there will be a “Lo-Hi” button that allows you to adjust the flame upward or downward. On others, there will be a screw that you can easily adjust with a screwdriver. Turning the screw clockwise will lower the flame, while a counterclockwise motion will turn it up.
How do I make my pilot light bigger?
Turn the screw on the control panel to adjust the size of the flame. Use a screwdriver. A clockwise turn will make the flame smaller and the counterclockwise turn will increase it. If you have a lo-hi button on the fireplace – use it!Feb 20, 2020
What should the pilot light look like on a gas fireplace?
Can a pilot light flame be adjusted?
Adjusting the Flame There is usually a small screw on the pilot valve body that will adjust the standing pilot flame. You may have to refer to the furnace manufacturer’s instructions to find the screw. Turn the screw as needed to adjust the flame throw.
Where is the pilot light opening?
Open the oven door and locate the pilot light opening at the bottom of the oven. The owner’s manual should identify the pilot light’s exact location if it’s hard to find. Use a grill lighter or long match to light the pilot light valve at the bottom of the oven. Some ovens are designed to be manually lit at each use.
How do you turn on a pilot light?
Press and hold the valve while you turn it to “Pilot.” Use a long BBQ lighter to relight the pilot light. Keep the valve pressed in for at least five seconds to make sure the pilot light remains lit. If the pilot light stays lit, turn the valve to “On.” If it doesn’t stay lit, repeat these steps.
How do you adjust the flame color on a gas fireplace?
To adjust the color of the flames so there is a soft yellow tip at the top of the flames, the gas adjustment should be left alone and the air input reduced by partially closing the air shutter located at the end of the burner.
Is it dangerous if pilot light goes out on gas fireplace?
A pilot light may need to be re-lit from time to time after being extinguished on purpose or by accident. If it is accidentally extinguished, there exists a danger that the gas used to keep the flame lit will continue to vent, possibly into the living space.
What does a gas fireplace pilot light look like?
A healthy pilot flame will be much like a blue “blow torch” flame. It will shoot sideways and be directly on your thermocouple and thermopile sensors. An unhealthy yellow pilot flame is more like a “candle”. It will shoot straight up in the air and will not engulf your sensors.
Why does my pilot light go out when I release the pilot light knob?
The most likely of those is that the thermocouple needs to be replaced. The button you press to light the pilot bypasses the thermocouple. When you release the button, the thermocouple ensures that unburned gas doesn’t get released by shutting off the gas when it’s not heated by the burning pilot light.
What color should a gas fireplace pilot light be?
blue
Is there a pilot light on a gas fireplace?
Gas fireplaces have traditionally used a standing pilot light to ignite the flames. Because that system does not use external electricity, the fireplace works if the power goes out. Newer generations of gas fireplaces use an electronic ignition system, requiring electricity to start up.
Last Updated: 16 days ago – Co-authors : 16 – Users : 4
