For many years Moen tub/shower valves have been manufactured using one of three valves. These valves are Standard, Posi-Temp and Moentrol. Although the look is similar, the trim is not necessarily interchangeable. … If this is the way your Moen valve operates, any Posi-Temp trim will fit.
First, you absolutely CANNOT mix manufacturers on trim and rough-in valves. In fact, even within one manufacturer, they have many valves and the trims are not interchangeable. Shower sets are not always sold as separate trim and rough. In hardware stores and home centers they are almost always sold aa a complete set.
Beside this, Is Moen and Delta interchangeable?
Its not really all that limiting. Both Moen and Delta put out fat catalogs of shower,tub shower and roman tub trims that will work with their respective “universal” valves. All in multiple assorted finishes.
Likewise, Can you change shower fixtures without changing valve?
Shower handles are normally held with a single screw to the valve stem, so all you should need to replace is the handle and screw. If the screw threads are stripped, for most it is less expensive to then replace the valve stem. … As long as there is no damage to the valve stem yes you can install a new handle.
Also, Can you replace a shower faucet without replacing the valve?
The handle and trim for the tub/shower controls can also usually be replaced without redoing any plumbing by using a universal replacement kit (available for most brands at home centers and plumbing supply stores). … Tub spouts (faucets) unscrew (Photo 2), or pull off if they have a setscrew underneath.
Are all Delta shower cartridges the same?
Typically the valve you want will be R10000-UNBX or R10000-UNWS. … They are all universal and all Delta Shower Trim Kits will fit every single one of these valves.
19 Related Question Answers Found
What is the difference between Moen cartridge 1224 and 1224B?
Is there any difference between the 1224 and 1224B cartridge? Answer: 1224(B) is for faucets purchased prior to 2014. … 1224(B) is for half turn faucets and 1224 is for full turn.
How do I know which Moen shower cartridge to buy?
The easiest way to find the Moen shower valve replacement cartridge you need is to know the series or model number of your Moen bathroom faucet. Exact information for these comes with any paperwork you have received when you first installed the original shower faucet (hopefully you saved it).
Are Moen shower handles interchangeable?
Moen has manufactured many types of shower rough-in valves including four types single handle shower valves. The trim kits are not interchangeable. It is important to identify which valve is currently installed by looking at the escutcheon screw location and the handle operation.
Are shower handles interchangeable?
You cannot interchange different manufacturer’s handles and spouts. In fact sometimes you cannot even interchange the same manufacturer’s trim between their own models.
Are shower valves universal?
The Delta MultiChoice Universal Valve gives you the flexibility to upgrade the style and functionality of your shower without altering the plumbing behind the wall. By installing the universal shower valve first, you have the freedom to decide (or change your mind on) what type of shower you want later.
Can you reuse a shower valve?
If you’re inquiring about re-using the old 3 handle fixtures, then most likely yes. But you need to look at the quality of the old pipes and valves. It might just mean cutting the pipes off at the source and attaching them to the new feeds.
How do I uninstall and install 1224 cartridge?
How much would a plumber charge to replace a shower valve?
The average cost to replace a shower valve is $310 if you hire a plumber to replace the stem and internal parts. An entire shower valve replacement costs are closer to $540 installed, on average, which includes removing the old broken valve, the cost of the new valve, as well as any other parts and labor costs.
How do you get a stuck Moen 1224 cartridge out?
– Now tighten the screw with your screwdriver slowly.
– If your cartridge is above the metal mount you will need the one inch socket and a longer one and 1/2 inch screw to allow enough room for the 1224 to pull out.
How do I identify my faucet cartridge?
If you cannot locate any markings on the faucet, you can start disassembling it; start with the handle. You’ll be able to measure the cartridge (stem) length of the faucet or resort to the number of splines.
How do I know what kind of shower valve I have?
Look at the center of the trim plate behind the shower handle to find a brand name or manufacturer symbol. If you see a “K,” the faucet is a Kohler unit; an “M” signifies Moen. American Standard, Delta and Price Pfister typically print their entire name on the faucet itself.
Are Moen shower valves interchangeable?
For many years Moen tub/shower valves have been manufactured using one of three valves. These valves are Standard, Posi-Temp and Moentrol. Although the look is similar, the trim is not necessarily interchangeable. … If this is the way your Moen valve operates, any Posi-Temp trim will fit.
Last Updated: 5 days ago – Co-authors : 8 – Users : 5
