When playing with soft tip darts, the throw line (oche) should be 7 ft. 9 ¼ inches (2.73 m) from the face of the board. This distance should be increased to 8 feet for steel tip darts. This is be measured from the face of the board and does not to include the space between the face of the dartboard and the wall.
Height and distance An “American” board is mounted a few inches lower, and a few inches closer, than the more commonly seen “English” board. The center of the cork is 5 ft 3 in (1.60 m) from the floor. The distance is set at 7 ft 3 in (2.21 m) from the back of the dartboard.
Moreover, How far should a woman stand from a dart board?
Setup the dartboard throwing distance to measure 7 Feet 9 and a quarter inch from the front of the dartboard to the front of the Oche (Throwing Line). The throwing distance can also be measures as 93.25 inches, 2.37 meter or 237 centimetres.
Secondly, How far should you stand from a dartboard?
Dart Board Measurements: Standard height from the floor to the bullseye on the dartboard is 5 feet 8 inches, while the oche (distance between the front of the board and the toeline) should measure 7 feet 9.25inches.
Simply so, What are the measurements for hanging a dart board?
Dart Board Measurements: Standard height from the floor to the bullseye on the dartboard is 5 feet 8 inches, while the oche (distance between the front of the board and the toeline) should measure 7 feet 9.25inches.
How far does a woman stand from a dart board?
A commonly asked question is what distance should ladies throw from? BDO World Championship ladies throwing distance is the same as the men’s, 7′ 9 ¼” (2.37m). But many leagues around the UK have different throwing distances for ladies. The most common distances other than 7′ 9 ¼”, is 7′ 6″ & 7′ 0″.
29 Related Question Answers Found
How do you set up a dart board metric?
The height can also be measured as 68 inches or 1.73 meters. Setup the dartboard throwing distance to measure 7 Feet 9 and a quarter inch(237 cm) from the FRONT of the dartboard to the FRONT of the OCHE(Throwing Line). The throwing distance can also be measures as 93.25 inches or 2.37 meters.
What do you put behind a dart board?
Plan on having a backstop behind your dartboard. This could be cork, soft wood planks, or covered cardboard. You want something that the dart will stick into but won’t show a hole when you pull it out. I used a large piece of heavy cardboard that I covered in dark grey felt.
How do you set up a dart board?
Dart Board Height: 5 feet. 8 inches from floor to the center of the bull’s-eye. Distance from front of the dartboard to the throwing line: Steel Tip: 7 feet 9 1/4 inches, Soft Tip: 8 feet 0 inches. To mark the throw line a simple piece of tape will suffice.
Why is a dart board set up the way it is?
The numbering of a standard dartboard is designed in such a way as to cut down the incidence of ‘lucky shots’ and reduce the element of chance. The numbers are placed in such a way as to encourage accuracy.
Why does darts start at 501?
Originally Answered: Why does darts start at 501? Well, to my mind, it’s two reasons. Starting on 501, an odd number, means you have to ‘break’ the odd number so that you can end on a double, or a bullseye; therefore adding a slight difficulty to the game.
How do you secure a dartboard?
Screw the center hole in place followed by any other guide holes. Most dart boards will have 3 other holes to securely fasten the board into place. Mount the wall bracket. Remember to place the wall bracket so that that the center of the bullseye will be at 5 feet 8 inches from the ground.
How thick should cork board be for darts?
25mm
What is the best thing to put behind a dart board?
Plan on having a backstop behind your dartboard. This could be cork, soft wood planks, or covered cardboard. You want something that the dart will stick into but won’t show a hole when you pull it out. I used a large piece of heavy cardboard that I covered in dark grey felt.
What is the pattern on a dartboard?
The Dartboard Sequence. The arrangement of the numbers around the circumference of a standard dart board is as shown below 20 1 18 4 13 6 10 15 2 17 3 19 7 16 8 11 14 9 12 5 Oddly enough, no one seems to know for sure how this particular arrangement was selected. It evidently dates back at least 100 years.
How do you hang a dart board without drilling?
How do you protect the walls behind a dart board?
Walls can be protected from darts by having an appropriate cover placed behind the dartboard. The thicker the cover the better the protection. A correctly positioned dartboard surround, cabinet or wall cover with good width and cushioning can protect your walls from dart holes.
Why is darts 501 and not 500?
Simple answer is, it means they have to ‘break’ the odd number so that they can finish on a double, or a bullseye. So you can’t just hit 20’s (treble 20’s) etc, you have to hit an odd number as well.
Last Updated: 9 days ago – Co-authors : 12 – Users : 4
