It’s easy to tell if a glass fuse is blown; it will show scorch marks, and the filament will be melted. To check a ceramic fuse, use an ohmmeter or continuity tester. With an ohmmeter or multimeter, you should see a reading close to zero ohms if the fuse is intact, or infinite if it’s blown.
Press and hold the START/ENTER key again for approximately 4 seconds. The L indicator or lock icon should disappear from the display. If the controls are still not responding, attempt a reset on the microwave by unplugging the unit for 2-3 minutes. Plug the microwave back in and attempt the use the microwave again.
Beside this, How do you fix a microwave that won’t turn on?
Start by checking the wall plug to ensure the microwave is plugged into power. Next, check the door switch and the door latch assembly. The microwave won’t start if the appliance believes the door is open. Next, check the two fuses, the thermal fuse, and the ceramic fuse, to see if they need to be replaced.
Likewise, What do you do when your microwave stops working?
Unplug the microwave and then access the fuse from inside the cabinet which is near the power cord. To check the continuity of the ceramic fuse, make use of a multimeter. If no continuity is observed, you may have to replace the fuse.
Also, What causes a microwave to suddenly stop working?
The most common cause for a microwave oven not working at all is a blown main fuse. … When this happens, the fuse is considered “blown” and the fuse will need to be replaced with a new one before the microwave will start working again. The main fuse is not the only fuse found in microwave ovens.
What happens when a fuse blows in a microwave?
If the fuse blows when you open the door, the door interlock might be malfunctioning. … If the door isn’t properly closed, microwaves could leak out. The oven will disable itself rather than let this happen. This is a tricky repair, involving multiple small components, and best left to a good repair shop.
21 Related Question Answers Found
How do you test a microwave thermal fuse?
The thermal fuse cuts off power to the microwave if the microwave overheats. To determine if the thermal fuse has blown, use a multimeter to test it for continuity. If the fuse does not have continuity, replace it. The thermal fuse cannot be reset—if the fuse is blown, it must be replaced.
Does a microwave have a reset button?
Most microwave ovens do not include a reset button. … The most common way of reseting your microwave is called a hard reset. A hard reset happens when you physically unplug the microwaves’ cord from the wall outlet.
Is there a reset button on microwaves?
Most microwave ovens do not include a reset button. … The most common way of reseting your microwave is called a hard reset. A hard reset happens when you physically unplug the microwaves’ cord from the wall outlet.
Is there a reset button on a microwave?
Most microwave ovens do not include a reset button. … The most common way of reseting your microwave is called a hard reset. A hard reset happens when you physically unplug the microwaves’ cord from the wall outlet.
How do you test a microwave thermal fuse with a multimeter?
How do you know if your microwave fuse is blown?
It’s easy to tell if a glass fuse is blown; it will show scorch marks, and the filament will be melted. To check a ceramic fuse, use an ohmmeter or continuity tester. With an ohmmeter or multimeter, you should see a reading close to zero ohms if the fuse is intact, or infinite if it’s blown.
How do you reset a microwave?
If the controls are still not responding, attempt a reset on the microwave by unplugging the unit for 2-3 minutes. Plug the microwave back in and attempt the use the microwave again. If the controls are still not responding, the microwave will require repair service.
How do I know if my thermal fuse is blown?
To test if your thermal fuse has blown, touch the right side of your multimeter lead to the right side of the fuse, and repeat with the left multimeter lead. If the multimeter needle fails to move, this indicates the thermal fuse has blown. Learn about testing for a blown fuse.
What happens if microwave fuse is blown?
Like most appliances that produce heat, your microwave comes equipped with a ceramic fuse. When the appliance overheats or suffers a dangerous power fluctuation, this fuse will blow to prevent fire or excess damage to the microwave by cutting the power.
How do you do a hard reset on a microwave?
Press and hold the START/ENTER key again for approximately 4 seconds. The L indicator or lock icon should disappear from the display. If the controls are still not responding, attempt a reset on the microwave by unplugging the unit for 2-3 minutes. Plug the microwave back in and attempt the use the microwave again.
How do I know if my microwave fuse is bad?
It’s easy to tell if a glass fuse is blown; it will show scorch marks, and the filament will be melted. To check a ceramic fuse, use an ohmmeter or continuity tester. With an ohmmeter or multimeter, you should see a reading close to zero ohms if the fuse is intact, or infinite if it’s blown.
Why is my microwave blowing fuses?
A faulty interlock switch is often the culprit if you’re blowing fuses regularly. If the microwave fuse blew because you opened the door while it was running, that’s a “smoking gun.” Otherwise, you’ll need to test the switch. First, unplug the microwave. … If that’s not the case, replace the switch.
Last Updated: 10 days ago – Co-authors : 12 – Users : 8
