A yellow triangle on your DSC ADT Alarm system is also known as a “trouble light.” That means if you see this symbol, your system has an issue that you need to resolve. A trouble light could mean 1 of 8 problems. To find out what the problem is, you can simply press *2 on your keypad.
To clear the memory, arm and disarm the system. Certain sensors (such as smoke detectors and glass break detectors) have to be reset after an alarm. To reset detectors, press and hold the RESET key () for 2 seconds. If a sensor fails to reset, it may still be detecting an alarm condition.
Beside this, How do I make my DSC alarm stop beeping?
You can easily toggle this on or off by pressing and holding the “Chime” button on any keypad that has function keys. For keypads without a chime button, just press “*4”. On this page, I’ll show you how to silence trouble beeping, and how to use a few easy keypad commands to find the source of the trouble.
Likewise, How do I reset my DSC fire alarm?
DSC alarms can go off for a number of reasons. To reset the alarm or the warning lights, enter your master code twice, press the reset button, and then enter “*72” if the alarm is still ringing. Once the alarm is off, try to find out why it went off.
Also, How do I reset my DSC alarm code?
Open the access door and enter your master code twice. Pull down the panel that covers the keypad on your alarm system. After this, simply enter your 4 digit master code, wait 2 seconds, and then enter it again. On some models, this step will reset the alarm and stop it from ringing.
How do you clear the memory on a DSC alarm system?
To clear the memory, arm and disarm the system. Certain sensors (such as smoke detectors and glass break detectors) have to be reset after an alarm. To reset detectors, press and hold the RESET key () for 2 seconds. If a sensor fails to reset, it may still be detecting an alarm condition.
16 Related Question Answers Found
How do you clear a DSC alarm problem?
– Open the access door on the unit.
– Press and hold the “RESET” key for 2 seconds.
– Press the buttons “*72” if the alarm does not reset after pressing the RESET button.
– Check the sensors if it still does not turn off.
How do you clear the yellow light on a DSC alarm?
How can I silence the trouble beep on the keypad? Press the ‘#’ key to silence the beeping, however you will need to fix the problem before the light will go out. You can also press ‘9’ after ‘*2’ to acknowledge and cancel the trouble condition but you still must fix the problem.
How do you clear the trouble light on a DSC alarm?
DSC Security System Trouble Light When a trouble is present the system trouble indicator light will illuminate and the keypad will beep every 10 seconds. To silence the trouble beep simply press the # key on the keypad. Now press *2 on your security keypad.
What does it mean when your alarm system says trouble?
A trouble signal (sometimes indicated in the alarm history by the abbreviation TR) indicates a possible problem or difficulty with your security system, such as a loose wire, a poorly aligned sensor or a low battery status.
How do I change my DSC alarm password?
– Press the * button followed by 5.
– Enter your system’s master code (If you do not know your system’s master code, contact Bulwark)
– The “Armed” light will illuminate on the keypad, and the “program” or “System Indicator” light will begin to flash.
How do I reset my DSC keypad?
– Open the access door on the unit.
– Press and hold the “RESET” key for 2 seconds.
– Press the buttons “*72” if the alarm does not reset after pressing the RESET button.
– Check the sensors if it still does not turn off.
How do I turn off the trouble light on my ADT alarm?
To find out what the problem is, you can simply press *2 on your keypad. After pressing this on the keypad, your zone lights should light up, communicating any trouble areas. Pushing # will silence the trouble sound.
Where is the master code on a DSC alarm?
The default master code is 1234. The master code is automatically assigned to user number 40. The master code is the first user code that comes programmed on the panel and it cannot be deleted, but it can and should be changed. The master code allows you to do quite a few things on the alarm system.
How do I reset my DSC alarm after a fire?
To cancel fire alarm press [#] within 30 seconds of alarm, otherwise the signal will be sent to the Central Station. To reset the smoke detectors press [*] then hold down the [4] for several seconds. A trouble will be indicated by the Trouble light which will remain on until the trouble condition is cleared.
How do you clear an alarm system?
You can reset your alarm system by powering it down and then powering it back on. This is what is known as a power reset. To power down the system, the backup battery must be disconnected, and the transformer must be unplugged. Then reconnect the battery and transformer to power it back on.
How do you troubleshoot a DSC alarm system?
– Press the pound key (#) to stop the security system from repeatedly beeping. …
– Press the star key (*) and then press the number 2 key. …
– Change the battery per the panel’s instruction manual if a number 1 appears on the display or the 1 zone is illuminated.
How do you remove ADT trouble code?
NOTE: After replacing the battery and reattaching the Keypad to the mounting plate, enter the 4-digit security code + OFF sequence twice to clear any trouble condition.
Last Updated: 14 days ago – Co-authors : 5 – Users : 11
