Ideally, the toilet’s rough-in should match the rough-in for your bathroom plumbing. However, even if a toilet is designed for a 10-inch rough-in, you can still install it into a space that has a 12-inch rough-in.
12 inch
Beside this, How do I know if my toilet is a 10 or 12 rough?
If your toilet has four bolts rather than the standard two, you’ll measure to the center of the rear bolts. The standard rough-in measurements are 10, 12 and 14 inches. If your measurement is in between these intervals, round your number down to the nearest standard measurement.
Likewise, Does Kohler make a 10 inch rough-in toilet?
KOHLER Highline Classic Comfort Height 10 in. Rough-In 2-Piece 1.28 GPF Single Flush Elongated Toilet in White-K-3713-0 – The Home Depot.
Also, How do you measure a toilet rough-in?
Measure for fit The rough-in measurement is the distance from the wall to the middle of the toilet flange, which lines up with the center of the hold-down bolts. For a toilet with two bolts on each side, measure to the center of the back bolt.
What does 12 inch rough-in mean for toilets?
The toilet rough-in refers to the distance from the finished wall to the center of the toilet’s floor drain or waste outlet. Most toilets have a rough-in of 12 inches, although it’s not uncommon for older homes to have an unusual size such as 10″ or 14″. … Rear-outlet toilets are configured a bit differently.
17 Related Question Answers Found
How do you measure a 10 inch or 12 inch rough-in for a toilet?
To measure the rough-in for your toilet, measure from the wall behind to the toilet to the middle of the closet bolt caps on your current toilet. The closet bolts are the bolts holding your toilet to the floor. If you have baseboards or tiling on the wall behind the toilet, do not include those in your measurement.
Can you replace a 14 inch rough-in toilet with a 12 inch rough-in toilet?
Replace a 14-inch rough-in toilet with a 12-inch rough-in toilet. You can definitely replace a toilet with a rough-in of 14 inches with one with a rough of 12 inches. The problem with this method is that a 2-inch gap will be left between the toilet tank and the wall.
How do I find out what type of toilet I have?
Carefully remove your tank lid, and place it gently on the floor. You’ll notice a four-digit number located on the back of the tank, near the water level mark. This is your tank model number. If the number starts with a two, it is a one-piece toilet.
What is the smallest rough-in toilet?
What is the Shortest Toilet Available? The shortest toilet available is the GALBA Small Toilet. It extends just 24 1/2″ from the wall making is an ideal toilet for small spaces and is made of vitreous china. If it isn’t available then the HOROW HWMT-8733 Small Toilet is the next shortest coming in at 25″ from the wall.
How do you measure for a replacement toilet?
Measure from the wall behind the toilet to the center of one of the closet bolts (which hold the toilet down). If the toilet has four closet bolts, measure to the center of one of the rear ones. Then measure from the center of the mounting holes to the back of the new toilet you’re considering.
How do you measure a 10 rough-in for a toilet?
Take the cover off of the toilet tank, and lay the toilet on its side to access the underside of the base. Measure from the back edge of the base to the center of the closet hole, or drain hole. Note if the measurement is 10 inches or 12 inches.
What does 10 inch rough-in mean for toilet?
Learn | Toilets | What is a Toilet Rough-In. A toilet’s rough-in refers to the measurement dimension from the finished wall to the center of mounting holes on the floor flange. Toilets are typically offered in either 10 inch, 12 inch, or 14 inch rough-ins.
Where is the model number on a Briggs toilet?
Contains the water used to flush the toilet and refill the bowl. The model number and date of manufacture will normally be located on the inside back wall of the tank near the water line.
How do I know if I have a 2 inch or 3 inch toilet flapper?
Look at the flush valve drain opening at the bottom of your tank. If the opening looks about the size of a baseball or orange, you need a 2″ flapper. If the opening looks about the size of a softball or grapefruit, you need a 3″ flapper.
How do you measure toilet rough-in?
No Answer yet.
How do I know the rough-in size of my toilet?
Measure for fit The rough-in measurement is the distance from the wall to the middle of the toilet flange, which lines up with the center of the hold-down bolts. For a toilet with two bolts on each side, measure to the center of the back bolt.
How do you measure rough-in for a new toilet?
Measure for fit The rough-in measurement is the distance from the wall to the middle of the toilet flange, which lines up with the center of the hold-down bolts. For a toilet with two bolts on each side, measure to the center of the back bolt.
Last Updated: 8 days ago – Co-authors : 11 – Users : 8
