Generally, nails (6d ring or screw shank, or 8d common) should be spaced 6 inches on center along supported panel edges and 12 inches on center on the panels’ interior supports, or as specified on the construction drawings.
Using code-approved screws rather than nails is the best option for avoiding movement. If using nails for subfloor installation, stick with ring-shank nails; smooth nails may withdraw easier, leading to squeaks.
Beside this, Is it better to nail or screw down subfloor?
7. Using Improper Fasteners. Using code-approved screws rather than nails is the best option for avoiding movement. If using nails for subfloor installation, stick with ring-shank nails; smooth nails may withdraw easier, leading to squeaks.
Likewise, Is it best to screw or nail floorboards?
If you want to have access to wiring and pipework through your floor, screws again are the way to go. Another great advantage is the fact that screws will pull the boards down better than any nails and hold without popping out. The tighter grip they provide makes screws the superior long term solution.
Also, What screws should I use for subfloor?
The proper steel screw sizes for securing 3/4-inch plywood to the floor joists are #8, #10 and #12 screws. The number refers to the thickness of the screw. Each is available in lengths from 1 1/4 to 3 inches. Typically, the 3-inch variety is used to secure plywood subfloors.
Should I glue and screw subfloor?
The answer: Glue. Although using a subfloor adhesive (or subfloor glue) is not required by code, it is a standard practice that can help prevent floor squeaks by reducing the chance for movement at the panel-to-joist connection. A quality subfloor adhesive will also increase the overall stiffness of the floor.
19 Related Question Answers Found
Is it better to nail or screw wood?
Nails are the fastener of choice when laying down hardwood floorboards because they’re not as likely to split the wood as screws and don’t mar the surface with screw heads. Nails also flex a bit more, to allow for the natural expansion and contraction of the wood, without loosening their grip.
How do you secure loose floorboards?
– Inspect the floor for any nail or screw heads that have raised up.
– Remove any raised nails with the hammer. …
– Drill new 2-inch wood screws completely into the empty holes to replace any removed nails or screws. …
– Cover the screw heads with wood filler. …
– Identify the loose floorboard by stepping on it.
Is it better to nail or screw plywood?
Answer: It is better to use screws on plywood instead of nails. Screws are more suitable for the soft plywood blocks since they can be removed more easily and do not cause splintering. You don’t have to worry about splitting the wood by using screws.
Do you nail or screw subfloor?
Using code-approved screws rather than nails is the best option for avoiding movement. If using nails for subfloor installation, stick with ring-shank nails; smooth nails may withdraw easier, leading to squeaks.
How do you nail down a subfloor?
Using code-approved screws rather than nails is the best option for avoiding movement. If using nails for subfloor installation, stick with ring-shank nails; smooth nails may withdraw easier, leading to squeaks.
Should subfloor be screwed or nailed?
Although ring shank nails have a good hold, screws have more overall holding power by comparison. With a larger thread gripping a bigger surface area around them, screws hold your subfloor very tightly – allowing no wiggle room for shifting or loosening.
What size screws should I use for subfloor?
The 3/4-inch-thick subfloor takes a 2-inch screw. A thicker subfloor takes a 3-inch screw.
Should you screw or nail subfloor?
Using code-approved screws rather than nails is the best option for avoiding movement. If using nails for subfloor installation, stick with ring-shank nails; smooth nails may withdraw easier, leading to squeaks.
Should you screw down a subfloor?
Screws, if driven properly, prevent creaking floors. A screw firmly holds the subfloor in place, which ensures a squeak-less floor for years to come.
What screws should be used for subfloor?
The proper steel screw sizes for securing 3/4-inch plywood to the floor joists are #8, #10 and #12 screws. The number refers to the thickness of the screw. Each is available in lengths from 1 1/4 to 3 inches. Typically, the 3-inch variety is used to secure plywood subfloors.
Should I screw down subfloor?
Screws, if driven properly, prevent creaking floors. A screw firmly holds the subfloor in place, which ensures a squeak-less floor for years to come.
Can you use screws on plywood?
To start with, most experts recommend screws over nails when working with plywood. Nevertheless, there are many projects built using nails with plywood. In most cases, the nails used are from a pneumatic finish nailer and are used in conjunction with wood glue.
Last Updated: 16 days ago – Co-authors : 10 – Users : 5
