Re: Just how big of a hole can Bondo cover? Bondo is only recomended to fill inperfections in the body, its only supposed to have a thickness of 1/6 up to 1/4 of and inch thick.
1/4 inch
Beside this, How deep can Bondo fill?
Thickness. There is no minimum thickness for Bondo, but there is absolutely a maximum. You do not want to apply body filler to anything that is thicker than about a 1/4”.
Likewise, How do you fill large holes in Bondo?
– Remove any metal that is not solid from around the area of the hole that is to be repaired.
– Use coarse-grit sandpaper to remove any paint and primer for a distance of 3 to 4 inches in all directions away from the hole. …
– Use nylon window screen to fill in behind the hole and create a backer to hold the auto body filler.
Also, How thick can you layer Bondo?
Thickness. There is no minimum thickness for Bondo, but there is absolutely a maximum. You do not want to apply body filler to anything that is thicker than about a 1/4”.
Can you layer Bondo?
Yes, you can layer bondo over bondo as much as necessary with no problem.
22 Related Question Answers Found
How do you fix a large hole in a car?
Does Bondo harden without hardener?
It hardens in the can without hardener. On some fiberglass that wouldn’t dry I smeared hardener over the surface and it soaked in or something and kicked off. You can add enough fiberglass resin to make a pourable mix for molds.
Can you fill dents with Bondo?
Unfortunately, a dent repair filler like Bondo is not ultimately the best choice you have to fix car dents. Fillers like Bondo can potentially harm your car in the long run.
Do I need to primer over Bondo?
If it’s just a very slight low area then an additional coat of primer may fix it, if it’s a little deeper then polyester putty may fix it and if it’s more serious then heavier filler may be required. Once you get the feel for what you’re doing you should only need a little more primer.
Can you Bondo over holes?
Body repair is often considered one of the most delicate and complicated car repairs, but learning how to Bondo rust holes is luckily quite simple. … The putty can be useful for filling rust holes in the most rust-prone areas of a car including quarter panels, fenders over and behind the wheels, and the bottoms of doors.
How thick can you go with body filler?
There is no minimum thickness for Bondo, but there is absolutely a maximum. You do not want to apply body filler to anything that is thicker than about a 1/4”. That does not mean it can’t be done, but the repair will not last as long.
How do you fill holes with body fillers?
How does Bondo fix small dents?
How big of a dent can you fill with Bondo?
1/4 inch
Why is my Bondo not drying?
If the Bondo isn’t dry, it’s because you didn’t use enough hardener or the temperature is too low. Getting it wet didn’t help. Try using a heat and strip gun. It gets hot pretty quick so keep it moving.
How big a hole can Bondo fill?
Re: Just how big of a hole can Bondo cover? Bondo is only recomended to fill inperfections in the body, its only supposed to have a thickness of 1/6 up to 1/4 of and inch thick.
What to use to fill holes in foundation?
Fill in holes and cracks less than 1/4 inch with silicone caulk and a caulking gun from the outside. Go around the perimeter of the foundation, finding your matches or toothpicks. Pull the stick out of the hole before caulking.
Last Updated: 12 days ago – Co-authors : 13 – Users : 10
