Set the drain to its open position. Unscrew the knob on the top of the drain stopper to see if there is a set-screw underneath. If your drain stopper has a set-screw, use a small screwdriver or a hex key to unscrew it. Twist the entire stopper counterclockwise until it pulls free from its mounting post.
Beside this, How do you remove a shower drain that has no screws?
If no screw, simply turn counterclockwise to remove. If you see a small screw, turn it with a flathead or Allen wrench until just loose enough to remove stopper (not entirely). Some pop-up drain covers pull straight up and off. Others must be wiggled back and forth.
Likewise, How do you unscrew a bathtub drain?
Unscrew the knob on the top of the drain stopper to see if there is a set-screw underneath. If your drain stopper has a set-screw, use a small screwdriver or a hex key to unscrew it. Twist the entire stopper counterclockwise until it pulls free from its mounting post. Remove the mounting post using pliers.
Also, How do you unscrew a lift and turn a bathtub drain?
Lift and Turn Tub Stopper With the stopper in the open position, use one hand to hold the body of the stopper in place. Slowing turn the knob counter-clockwise, looking for a screw set on the knob. If there isn’t one, turn the stopper counter-clockwise to unthread from the strainer until it can be removed.
How do you unscrew an old bathtub drain?
Set the drain to its open position. Unscrew the knob on the top of the drain stopper to see if there is a set-screw underneath. If your drain stopper has a set-screw, use a small screwdriver or a hex key to unscrew it. Twist the entire stopper counterclockwise until it pulls free from its mounting post.
20 Related Question Answers Found
How do you remove a twist and turn tub drain?
Lift and Turn Tub Stopper With the stopper in the open position, use one hand to hold the body of the stopper in place. Slowing turn the knob counter-clockwise, looking for a screw set on the knob. If there isn’t one, turn the stopper counter-clockwise to unthread from the strainer until it can be removed.
How do you open a stuck bathtub drain?
Get a flathead screwdriver and some Allen wrenches. Put the stopper in the open position and turn the knob while looking for a screw. If there is no screw, turn it counterclockwise until it comes out and skip to Step Six. You will either need your screwdriver or Allen wrench to loosen the screw.
How do you remove a tub drain lever?
– Set the drain to its open position.
– Unscrew the faceplate that is mounted to the overflow drain.
– Pull the faceplate free and the rest of the drain stopper’s connected hardware should follow. …
– You may need to wiggle the drain stopper to free its entire length.
How do you replace a lift and turn tub drain?
Grab the knob on top of the drain plug. Pull up on the drain plug and turn it until it stays in the “open” or “drain” position. Look around the edge of the knob for a set screw. If your knob has a set screw, use a small flat-head screwdriver or hex key to loosen the set screw and remove the knob.
How do you get a stuck tub drain out?
How do you remove a twist tub drain?
Set the drain to its open position. Unscrew the knob on the top of the drain stopper to see if there is a set-screw underneath. If your drain stopper has a set-screw, use a small screwdriver or a hex key to unscrew it. Twist the entire stopper counterclockwise until it pulls free from its mounting post.
How do you remove a bathtub drain twist?
Set the drain to its open position. Unscrew the knob on the top of the drain stopper to see if there is a set-screw underneath. If your drain stopper has a set-screw, use a small screwdriver or a hex key to unscrew it. Twist the entire stopper counterclockwise until it pulls free from its mounting post.
How do you fix a bathtub drain that won’t stay open?
Lower the lever and fill the tub with a small amount of water once you’ve shortened the linkage enough so you can lift the lever all the way up. Watch the water, and if it drains, lengthen the linkage slightly by turning the adjustment screws clockwise. Repeat this procedure until the tub holds water.
How do you remove a lift and turn tub drain?
Lift and Turn Tub Stopper With the stopper in the open position, use one hand to hold the body of the stopper in place. Slowing turn the knob counter-clockwise, looking for a screw set on the knob. If there isn’t one, turn the stopper counter-clockwise to unthread from the strainer until it can be removed.
How do you remove a bathtub drain lever?
Remove the knob on the top of the stopper. Hold the body of the stopper in place with one hand and with the other hand unscrew the knob by turning it counter-clockwise. If the knob will not unscrew, then wrap the rag around the knob and use the pliers to help remove the knob.
How does a bathtub trip lever work?
A bathtub with a trip-lever drain stopper works using an internal plunger that moves up and down inside the waste-and-overflow tube to pivot a drain stopper in the drain opening. When the plunger is down, it presses down on the stopper lever and forces the stopper up into the open position.
What does the lever in the bathtub do?
The trip lever is the lever that makes the tub drain go up and down.
Last Updated: 6 days ago – Co-authors : 6 – Users : 10
