Why are my sprinklers going off twice?

0
6368

A common reason why a program is repeating is that you have a second start time set. The start times control the exact time your ESP-Me timer will begin to water and they also control how many times a day your timer will water. The ESP-Me allows you to set up to 6 start times per program.

Read the full answer

When a station has completed its watering time, the controller will switch to the next station in that program automatically. Eliminating a Program Start Time Turn the dial to the START TIMES position. … A common reason for a controller to repeat a cycle is too many programmed start times.

Beside this, What causes sprinklers to pulsate?

There can be two problems with the nozzle. It can be clogged and not send a solid stream of water, or it can be leaking. Both of these problems can be caused by dirt or other debris. Drop the nozzle into a bucket of warm soapy water and let it set there.

Likewise, How do you know if your sprinkler valve is bad?

– Individual sprinkler heads not working.
– Low water pressure at the sprinkler heads.
– Sprinkler zones do not turn on.
– Leaking around a zone valve.
– Leak at the sprinkler head furthest from the valve.

Also, What is a pulsating sprinkler?

The way a pulsating sprinkler works is simple and relies on a sprinkler head pivoting on a bearing. … Water shoots out of the sprinkler in a powerful stream that can go quite a distance, and waterfalls from that stream, as well, watering everything in its path.

When should you replace sprinkler valves?

One of the components that you may need to replace regularly are the wires, often due to improper installation and corrosion. Valves will give you 10 to 15 years of service, while controllers 5 to 10 years.


23 Related Question Answers Found

 

How much does it cost to replace a valve on a sprinkler system?

Sprinkler Repair Costs Valve replacement averages about $12.50 to $40 per valve in addition to labor. Some heads can cost as much as $30 each, and brass valves range to $100 or more. Sprinkler systems are a great way to maintain your lawn.

Do sprinkler solenoids go bad?

If your solenoid is bad, the water pressure in the sprinkler chamber will not be changed and the valve will fail to open.

What happens when a sprinkler solenoid goes bad?

A sprinkler works because the solenoid changes the water pressure inside the sprinkler chamber and lifts the plunger that opens the sprinkler valve. … If your solenoid is bad, the water pressure in the sprinkler chamber will not be changed and the valve will fail to open.

How do I stop my sprinkler system from water hammering?

If only one of the irrigation valves is causing water hammer the easiest solution is to reduce the amount of water that valve is using. That will reduce the velocity and the water hammer will stop. To do that you need to reduce the number of sprinkler heads the valve operates.

How do you fix a sprinkler solenoid?

How do I reset my irrigation system?

– Turn the control dial to the “off” position.
– Press the “next” button to access the clear-memory feature. …
– Press and hold the “off” button until the display stops blinking.
– Turn the control dial to the “run” position.
– Press and hold down the “minus” arrow and “prog” buttons simultaneously.

What happens if a sprinkler solenoid goes bad?

Your sprinkler controller sends an electric current to the solenoid in order to activate it and open the valve and cuts off the current to the solenoid to close the valve. If your solenoid is bad, the water pressure in the sprinkler chamber will not be changed and the valve will fail to open.

How do I reset my sprinklers?

– Turn the control dial to the “off” position.
– Press the “next” button to access the clear-memory feature. …
– Press and hold the “off” button until the display stops blinking.
– Turn the control dial to the “run” position.
– Press and hold down the “minus” arrow and “prog” buttons simultaneously.

What causes a sprinkler valve to leak?

The most common reason why water leaks through a valve is because there is debris obstructing the valves diaphragm.

Why does my sprinkler system keep running?

More often than not, there will be a valve that is stuck in the “open” position on the pressurized system. When the valve remains open, water continues to run down the line, which causes your sprinkler to continuously run even when the timer is in the “off” position.

Why do my sprinklers keep running?

More often than not, there will be a valve that is stuck in the “open” position on the pressurized system. When the valve remains open, water continues to run down the line, which causes your sprinkler to continuously run even when the timer is in the “off” position.

How long do sprinkler solenoids last?

about 20 years


Last Updated: 10 days ago – Co-authors : 16 – Users : 11

LEAVE A REPLY

Please enter your answer!
Please enter your name here