ALL Fender guitars produced after 1955 used this product until 1967, when Fender began experimenting with polyesters an undercoat.
Nitrocellulose isn’t known to be toxic. As it’s used in finishes, it’s generally mixed with acetone, which is also only toxic in larger amounts. The human body actually manufactures and metabolizes it naturally, albeit in very small quantities.
Beside this, How long does nitrocellulose lacquer take to cure?
3-4 weeks
Likewise, When did fender stop using cloth wire?
60s
Also, How long does it take for a guitar to age?
Englemann is softer than Sitka and would open up faster. When I get a new guitar, I usually play it about the same rate you do, maybe a little less, and they tend to take 3-6 months to start opening up.
How long is lacquer toxic?
Most health hazards stemming from VOCs are the result of inhaling the lacquer fumes. These fumes can cause difficulty breathing, kidney failure, nervous system damage and loss of vision. These lacquers generally remain toxic for up to a month after drying.
20 Related Question Answers Found
When did fender stop using nitrocellulose?
Fender uses a variety of finish types on its instruments, from the original nitrocellulose lacquer finishes used so often in the company’s 1950s-’60s era (and beloved of vintage guitar enthusiasts) to more modern urethane and polyester finishes.
Is nitrocellulose biodegradable?
Based on the detection of reducing sugars during culture growth, IL’inskaya and Leshchskaya 6 concluded that nitrocellulose was degraded under their 285 Page 4 experimental conditions. … By using this method, the authors came to the conclusion that nitrocellulose can not be dnectly biodegraded.
What kind of finish does fender use?
urethane finishes
What is nitrocellulose made of?
Nitrocellulose (also known as cellulose nitrate, flash paper, flash cotton, guncotton, pyroxylin and flash string) is a highly flammable compound formed by nitrating cellulose through exposure to nitric acid, or to a mixture of nitric acid and another acid, usually either hydrochloric acid or sulfuric acid, or to …
Which Strat has nitro finish?
The only MiM Strats that I know of that have both neck and body finished in nitro are the Classic 50s Lacquer, Classic 60s Lacquer and the new Classic Player 60th Anniversary.
How do I know if my guitar has a nitro finish?
Member. Find a hidden area like the control cavity and rub a small spot with a Q-Tip dipped in acetone. If the finish disolves then it is nitrocellulose, if it doesn’t it’s a urethane, polyurethane, or polyester finish. Also, why do people capitalize nitro.
When did Fender start using polyester?
ALL Fender guitars produced after 1955 used this product until 1967, when Fender began experimenting with polyesters an undercoat. By 1968, virtually all Fender guitar products used polyester as an undercoat, including necks.
What kind of clear coat is used on guitars?
ColorTone® Aerosol Guitar Lacquer is formulated especially for musical instruments. Fast-drying and resistant to alcohol and water, it produces a hard, durable finish that enhances the beauty of the wood.
Do guitars get better with age?
Acoustic guitars have proven to the ears of many players – to sound better as they age. The theory that best explains this is – that as the wood in the body ages, it becomes lighter and more responsive and more resonant.
Can you use polyurethane on a guitar?
Polyester and polyurethane guitar finishes are also more resistant to general wear, meaning that scratches and dings are harder to see and inflict. Poly finishes can remain shiny even after decades of use, and don’t fade away in the areas that you’d typically make contact with.
How long does it take for lacquer smell to go away?
about three days
How long will a guitar last?
10 years
Last Updated: 17 days ago – Co-authors : 10 – Users : 6