Prepare Your Space
- Apply for a Permit. Getting a permit is essential to the job. …
- Take Care of Dampness. You never want to install drywall in your basement before checking for water or high humidity. …
- Pick Your Materials. Drywall or plaster? …
- Gather Your Tools. …
- Install Insulation. …
- Frame the Walls. …
- Install Utilities. …
- Mount Drywall.
Thus, How can I save money to remodel my basement? 7 ways to save on your basement remodel
- Opt for an inexpensive, prefabricated egress window and well. …
- Test exterior walls for moisture before finishing. …
- Cut out some studs. …
- Install drop ceilings. …
- Skip the carpet and install luxury vinyl tile instead. …
- Add a bathroom (or at least a half bath) near existing plumbing.
Additionally What is the first thing to do when finishing a basement? Installing a new basement subfloor as your first step to finishing your basement floor: Lay down sheets of polystryene insulation using adhesive in the same fashion you used when insulating the walls. On top of the insulation, lay plywood sheets. Secure the new subfloor using your masonry drill and concrete screws.
Do I need to insulate basement walls? Walls. Basement walls should be insulated with non-water sensitive insulation that prevents interior air from contacting cold basement surfaces—the concrete structural elements and the rim joist framing.
Do I need to seal my basement walls before finishing? Water issues can cause serious damage and ruin your investment. Before finishing the basement, deep-seal your concrete against water seepage, water vapor, and soil gases like radon.
What is the cheapest way to finish a basement floor?
Concrete. Concrete flooring can be the least expensive choice in a basement because it’s already there. You might be able to give it a good cleaning, maybe grind down some rough spots, and call it good. You can always use throw rugs or carpet tiles (see below) to add warmth and softness to specific areas.
What is the cheapest way to finish a basement wall?
Paneling can be used as an inexpensive way to finish you basement walls or ceiling. Use a strong adhesive to put strips of wood on your concrete basement walls, and then use wood screws that match your paneling to attach the paneling to the wood strips.
How much does it cost to drywall a basement ceiling?
Drywall: It costs around $1.50 per square foot to hang drywall in your basement. Ceiling: Basic ceiling installation can cost as little as $1-2 per square foot. But, if the project is complex, it can cost around $6 per square foot.
What’s the difference in sheetrock and drywall?
Drywall is a flat panel made of gypsum plaster sandwiched in between two sheets of thick paper. It adheres to metal or wood studs using nails or screws. Sheetrock is a specific brand of drywall sheet. These terms are often used interchangeably.
How can I finish my basement cheaply?
You can save on the cost to finish a basement by doing things not bound by codes: installing trim or doors, painting walls and woodwork, and installing flooring, says Buckeye Basements’ Jon Smith. Beyond that, count on using some pros.
What is the average cost to hang and finish drywall?
Drywall installation costs $1.50 to $3.50 per square foot, depending on the ceiling height, drywall type, and level of finish. Drywall costs $0.50 to $0.80 per square foot for materials. The labor cost to hang and finish drywall is $1.00 to $2.70 per square foot. The cost to drywall a 12×12 room is $580 to $1,800.
What’s the next step after drywall?
After drywall has been completed the exterior siding of the home will begin. You will see the brick, stonework, stucco, or whatever your using getting being laid out. Exterior Driveway/Walkway. It is at this point that additional exterior finishes like a garage and outdoor walkways are poured with concrete.
What is the difference between green and purple drywall?
What’s the difference between PURPLE drywall and traditional green drywall? Traditional green drywall (also known as greenboard) is only moisture-resistant. PURPLE drywall, manufactured only by Gold Bond Building Products, is superior because it offers moisture, mold and mildew resistance.
Why you should not finish a basement?
Finished basements can end up with mold and other moisture related problems behind the finished walls. Be sure you understand the details of waterproofing and proper ventilation. Ventilation and Dehumidification – Merely installing a dehumidifier can actually create problems by drawing water through foundation walls.
Does adding a bathroom in the basement add value?
Adding a basement bathroom can increase your home’s resale value by 10%-20%. It also can turn a wasted space into an enjoyable addition to your home. The average basement bathroom will cost $3,000-$25,000, depending on the existing plumbing and condition of your basement.
Why do so many houses have unfinished basements?
Some just want the room to act as extra storage or utility room that won’t need as much attention as other rooms. It could also be that a homeowner wants to leave a basement incomplete to pave way for its customization. Such a basement will remain incomplete until the owner is ready to start the redesign process.
How do you fix up a basement without finishing it?
10 Affordable Unfinished Basement Ideas
- 10 Ideas for your Unfinished Basement.
- 1 | Hide Mechanicals. …
- 2 | Install Electrical Outlets. …
- 3 | Deep Clean the Basement. …
- 4 | Add Overhead Lighting. …
- 5 | Paint the Exposed Ceiling. …
- 6 | Paint the Basement Walls. …
- 7 | Paint the Basement Concrete Floors.
What should I put on my basement walls?
Attach wood furring strips, Z-shape channels, or 2×4 studs to flat, dry masonry walls, then add insulation and cover the strips or studs with drywall. Such treatments give basement walls a smooth, even surface that accepts finish materials such as paint, wallpaper, or paneling.
How do you put a toilet in a basement without breaking concrete?
You can tie a bathroom tub or shower into an upflush toilet system, which eliminates the need to break into the concrete floor. The system sends the wastewater from the shower drain and toilet to a holding tank before being pumped to the main sewer line.
What adds the most value to a house?
What Home Improvements Add the Most Value?
- Kitchen Improvements. If adding value to your home is the goal, the kitchen is likely the place to start. …
- Bathrooms Improvements. Updated bathrooms are key for adding value to your home. …
- Lighting Improvements. …
- Energy Efficiency Improvements. …
- Curb Appeal Improvements.
How much does it cost to put a shower in a basement?
How Much Does It Cost to Add a Bathroom in a Basement? Adding a bathroom in a basement costs $8,000 to $15,000 on average. You’ll save $500 to $1,000 if you have a rough-in drain already in place – typical in newer homes and usually near the main drain line.
What comes after drywall in basement?
Once drywall is complete trim carpenters will come in to begin their work. The first step in the trim out is to install all of the doors and door casing. Once complete cabinetry will normally be installed followed by the baseboard.
Can you finish a basement yourself?
The basic steps to finish your basement include insulating walls, choosing flooring and adding a ceiling to transform your lower level into an additional living area.
…
The Materials You’ll Need:
| Foamboard adhesive | Polystyrene foam insulation | Duct tape |
|---|---|---|
| Framing nails | Wall screws | Drywall |
• Dec 19, 2018
What is the first step to finish a basement?
There are 10 steps to completing this project:
- Step 1: Decide How You Want to Use Your Basement.
- Step 2: Draft a Detailed Basement Floor Plan.
- Step 3: Look for Signs of Moisture in Your Basement.
- Step 4: Do a Basement Inspection.
- Step 5: Consider Your Electrical and Plumbing Needs.
- Step 6: Choose Your Basement Insulation.
How long should it take to finish a basement?
The standard time it takes to finish a basement is 4-8 weeks. Keep in mind that this can vary by the project size, so give yourself as much time as you need. This is a big investment and an extensive project, so there is no need to rush it.
How do you finish a basement wall cheaply?
Paneling can be used as an inexpensive way to finish you basement walls or ceiling. Use a strong adhesive to put strips of wood on your concrete basement walls, and then use wood screws that match your paneling to attach the paneling to the wood strips.
Do you have to insulate basement walls?
Walls. Basement walls should be insulated with non-water sensitive insulation that prevents interior air from contacting cold basement surfaces—the concrete structural elements and the rim joist framing.
