Weights of Various Woods (pounds per 1000 board feet)
Species | Lumber | Wood |
---|---|---|
Oak, red | 5,250 | 5,670 |
Oak, white | 5,200 | 5,580 |
Pine, jack | 4,200 | 4,500 |
Pine, loblolly | 4,500 | 4,860 |
Thus, How do you calculate the weight of a log? Estimated Log Weight = A x (A x (B x 0.5454)) / 100 x C
- Where:
- A = Log Diameter in Inches.
- B = Log Length in Feet.
- C = Type of Wood Value.
Additionally How many board feet are in a log truck load? The loads of logs delivered to the seven mills by tandem-axle trucks ranged from 17,- 710 to 37,520 pounds. Load volumes ranged from 1,199 to 3,759 board feet by the Doyle rule and 1,655 to 4,030 board feet by the In- ternational rule, and from 342 to 689 cubic feet (table 1).
How do you figure board feet out of a log? To estimate the board feet from a log, measure the average diameter of the smaller part of the log in inches. Then, measure the length of the log in feet. Move the scale’s marker over to where these two measurements meet. Where the two measurements intersect is the approximate board foot output.
How many board feet are in a ton of oak? I buy oak and pine by the ton and average 250 to 300 board feet per ton. Industry standard is about 4 tons per 1mbdft.
How many board feet is in a log?
How Much Lumber is in a Log?
The board-foot contents of logs according to the International 1/4 Rule | ||
---|---|---|
Diameter of log small end, inside bark | Length of log (feet) | |
12 inches | 45 | 70 |
13 inches | 55 | 85 |
14 inches | 65 | 100 |
• Aug 3, 2011
How do you figure board feet in a log?
To estimate the board feet from a log, measure the average diameter of the smaller part of the log in inches. Then, measure the length of the log in feet. Move the scale’s marker over to where these two measurements meet. Where the two measurements intersect is the approximate board foot output.
How do you calculate the weight of a wooden log?
Estimated Log Weight = A x (A x (B x 0.5454)) / 100 x C
- Where:
- A = Log Diameter in Inches.
- B = Log Length in Feet.
- C = Type of Wood Value.
How much does a 10 oak log weigh?
Four diameters for each of the four lengths provides an approximation of weight. There are several varieties of Oak but they are all have similar weight calculations. (Be careful! This is a lot of weight.)
…
Weight Table.
Species | Oak |
---|---|
555 | |
990 | |
1545 | |
10 | 490 |
How many board feet are in a 2x4x10?
A 2x4x10 board has 6.66667 total board feet in it: the board foot factor (BFF) of a 2×4 is 0.666667. Multiply 0.66667 by the length of 10 which gives total board feet of 6.66667.
How much do oak logs sell?
Appalachian Hardwood Sawtimber Pricing by Species
Species | Price – $MBF |
---|---|
Black Oak | $185.00 |
Scarlet Oak | $150.00 |
White Oak | $515.00 |
Chestnut Oak | $300.00 |
How do you convert board feet to tons?
Please provide values below to convert board foot to ton register [ton reg], or vice versa.
…
Board Foot to Ton Register Conversion Table.
Board Foot | Ton Register [ton Reg] |
---|---|
0.1 board foot | 8.33333E-5 ton reg |
1 board foot | 0.0008333333 ton reg |
2 board foot | 0.0016666667 ton reg |
3 board foot | 0.0025 ton reg |