- Inadequate air flow within the system.
- Buildup of dust, dirt, or debris.
- Electrical problems, including an excessive voltage supply.
- Motor insulation failing prematurely due to high temperatures.
Subsequently, How much does it cost to replace furnace motor? On average nationwide, a furnace blower motor replacement costs $400 to $600, including parts and labor. A single-speed blower motor costs around $450 to replace while a variable-speed motor costs $600 or more. You’ll also need to budget labor, about $75 to $125 per hour.
Where is the reset button on furnace blower motor? Locate the reset button on the furnace and press it to reset the furnace. It is usually located inside the blower compartment on the side of the blower motor. Be cautious as the housing may be hot. If the button is popped up, press it down.
Yet, Can a blower motor be repaired? There are a number of things that can go wrong with your heating system, but if the air stops blowing altogether and the same is true on cold air settings, a blower motor replacement is likely in order. The good news is that it’s a fairly straight forward repair.
How do I test my furnace blower motor? 
What causes blower motor failure?
Blower motor breakdown can be the result of anything from old age to failed bearings, high amp draw, electrical failure in the windings, dirt accumulation, and more. “The most common cause is dirt accumulation due to lack of maintenance,” said Tom Beaulieu, president of Bay Area Services Inc.
What can cause a blower motor to stop working?
In most cases, a blower motor resistor fails due to corrosion or overheating. Sometimes, the mechanical resistance to the motor rotation causes an excessive electric current that can overheat and prematurely damage the blower motor resistor.
Is it hard to replace a blower motor?
The replacement of the blower motor is common and straightforward, so most shops will perform the repair — many on the same day.
How much does it cost to replace a furnace blower motor?
On average nationwide, a furnace blower motor replacement costs $400 to $600, including parts and labor. A single-speed blower motor costs around $450 to replace while a variable-speed motor costs $600 or more. You’ll also need to budget labor, about $75 to $125 per hour.
Where is the reset button on my furnace blower?
Locate the reset button on the furnace and press it to reset the furnace. It is usually located inside the blower compartment on the side of the blower motor. Be cautious as the housing may be hot. If the button is popped up, press it down.
How do you test a furnace blower motor?
What causes blower motors to go bad?
Blower motor breakdown can be the result of anything from old age to failed bearings, high amp draw, electrical failure in the windings, dirt accumulation, and more. “The most common cause is dirt accumulation due to lack of maintenance,” said Tom Beaulieu, president of Bay Area Services Inc.
When should I replace my blower motor?
If the motor is making rattling, clanking, or banging sounds, it may be because of a loose or broken part. Loud banging sounds are especially worrisome. They’re usually a sign that something is damaged or disconnected. And this may mean replacing the blower motor.
How often should furnace be replaced?
The average furnace lasts approximately 18–20 years, though the actual number depends on the furnace itself and the level of care put into maintaining it during its lifespan.