PopularAsk.net – Your Daily Dose of Knowledge

Is AW 32 the same as ISO 32?

Re: Hydraulic Oil question AW 32=ISO 32 Yeah, they are esentially the same thing – 10wt hydraulic oil — virtually all manufacturers versions will have “32” in the name and they will match the ISO spec….it should be no problem in something a simple as a lift.

Read the full answer

Sinopec Anti-wear Hydraulic Oil ISO VG AW32 is a premium light weight paraffinic based hydraulic oil, ideal for industrial applications or for the hydraulic systems in cold weather regions. It is a rust and oxidation (R&O)-inhibited oil with the added benefit of an anti-wear additive package for protection.

Beside this, What is AW32 hydraulic oil?

AW Hydraulic Oil is premium grade oil designed for use in all hydraulic systems where anti-wear hydraulic oil is recommended. All grades are rust and oxidation inhibited and contain an effective anti-wear additive and anti-foam additives to release entrained air rapidly. Features and Benefits.

Likewise, What is the difference between AW 32 and AW 46 hydraulic oil?

AW-32 is neither “better nor worse” than AW-46. The numbers refer only to the viscosity, not to the quality. Quality of the oil is determined by the manufacturer. For Atlas above ground lifts, AW-32 (lower number than AW-46) will flow “better” in colder weather than AW-46.

Also, Is there a substitute for hydraulic fluid?

Machine oil or lightweight motor oil of 10/20W can be substituted for hydraulic fluid. Automatic transmission fluid can function as hydraulic fluid. Use it if you are stuck and do not have the oil recommended by the manufacturer. There are a few vegetable seed oils that can be commercially used as hydraulic fluids.

Can you mix AW32 and AW 46?

Yes the numbers are the viscosity grades and in your case you are intenting to top up, and you can be sure that if the same brand and poduct type are mixed will not give any adverse reaction. even if you top up 50% of the capacity the viscosity would still be at around 38- 39 CST and should not be a problem.


15 Related Question Answers Found

 

What is ISO 32?

Hydraulic Oil 32 is exceptional quality, top achievement hydraulic oil developed to accommodated the appeal for environmentally acceptable hydraulic fluids. This product is based on synthetic, readily biodegradable esters.

What is the difference between ISO 32 and AW 32 hydraulic oil?

While most hydraulic oils are measured with the simple ISO grade, there are oils out there with anti-wear properties that are measured separately. … An AW 32 hydraulic oil is going to be at 32cSt at 40°C for instance. The difference here is that there are additives contained within the oil.

What weight is AW32 hydraulic oil?

MAG 1 AW32 (ISO32) 10-Weight Hydraulic Fluid is a high quality oil that is ideal for use in most 2-stage log splitter pumps. Benefits include exceptional protection against wear from contaminants and higher operating temperatures and pressures ensures longer equipment life.

Can you mix different weights of hydraulic fluid?

Mixing oils with different additive packages is never recommended. Doing so could compromise the additive performance of both constituents, cause corrosion of component surfaces and lead to increased mechanical wear.

Are hydraulic fluid and hydraulic oil the same?

Hydraulic oil and hydraulic fluid are terms that are sometimes used interchangeably, but they are not necessarily the same. While hydraulic oil is a fluid, hydraulic fluid can also consist of other fluids, including plain water, water-oil emulsions and salt solutions.

What is AW 32 hydraulic oil used for?

ISO 32, 46 and 68 grades are most commonly used for hydraulics with vane-, piston-, or gear-type pumps, especially where pressures exceed 1000 psi. They can also be used to lubricate lightly loaded reciprocating compressors.

Is AW32 the same as 10W?

10W is a SAE 10 weight or ISO 30 viscosity and 20 weight is just that, a SAE 20 weight or a ISO 68 viscosity. They are not the same.

What is special about hydraulic oil?

Not only is it a lubricant, it’s also the means by which power is transferred throughout the hydraulic system. So, it’s a lube and a power transfer device. This dual role makes it unique. To be an effective and reliable lubricant, hydraulic oil must possess properties similar to most other lubes.

What is AW 46 hydraulic oil used for?

ISO 32, 46 and 68 grades are most commonly used for hydraulics with vane-, piston-, or gear-type pumps, especially where pressures exceed 1000 psi. They can also be used to lubricate lightly loaded reciprocating compressors.

Which hydraulic oil is thicker 32 or 46?

The hotter the temperature, the thinner the oil becomes and the colder the oil, the thicker. So, for example, a hydraulic system operating in a cold climate like Tasmania would run better with a lower viscosity grade of 32. … Here in Perth, 46 and 68 are better suited to our climate.

What makes a good hydraulic fluid?

The principal requirements of a premium hydraulic fluid are proper viscosity, high viscosity index, anti-wear protection (if needed), good oxidation stability, adequate pour point, good demulsibility, rust inhibition, resistance to foaming, and compatibility with seal materials.

What can I substitute for hydraulic fluid?

“It is a common practice in the construction and mining industries to use engine oil SAE 10, SAE 20 or SAE 30 with the lowest API rating as a substitute for hydraulic oil ISO 32, ISO 46 or ISO 68, respectively for hydraulic systems of heavy equipment.


Last Updated: 4 days ago – Co-authors : 12 – Users : 5

Exit mobile version