PopularAsk.net – Your Daily Dose of Knowledge

How much slope does a shower niche need?

The proper slope is 1/4 inch per foot so about 1/8 total for a niche.

Read the full answer

about 48 to 60 inches

Beside this, How high should a shower niche be installed?

Positioning your niche at chest to eye-level is a good standard. This translates to a height of about 48 to 60 inches. Ideally, you’ll want to position your niche to fit between the studs which are usually located 16 inches apart. But many contractors can help you with planning the space for a more custom look.

Likewise, What height do you install a shower valve?

between 36 and 48 inches

Also, What is the minimum slope for a shower?

about 4 percent

How high should a soap dish be in a shower?

48 to 60 inches


20 Related Question Answers Found

 

How low can a shower curb be?

The shower pan curb must be a minimum of 2 inches above the top of the drain. This is common building code in the U.S. For example, if you have a 1/4 inch per foot slope, and the curb is 3 feet from the drain, the curb must raise 1 1/4 inch from the shower floor. Of course, this is for the finished shower.

What is the minimum slope for water flow?

Generally, minimum slope for water to run off is 1% (1/8″ per 1′). However, minimum slope for a flat roof by building code here is 2%. (1/4″ per 1′).

What is the minimum height for a shower curb?

2 inches

How tall is a standard shower curb?

2 inches

What is a low threshold shower?

Low-threshold showers only have just a small lip to step over. Compared to a traditional bathtub, the lip is minuscule. This allows those who do have mobility issues just a simple step, for easy access in and out of the shower. … A low-threshold shower will provide your bathroom with a sleek contemporary look.

What is the average height of a shampoo bottle?

Average Height of a Shampoo Bottle The height of most shampoo bottles falls in the range of 7 1/2″ to 9 1/2″. The height of the larger pump style shampoo bottles vary between 9 1/2″ and 10 1/2″ when the pump is extended, but you’ll want 12″ – 13″ in height to access the pump with your hand.

Is a shower curb necessary?

Without a curb, the shower water isn’t contained in the tub area and can get EVERYWHERE. … A curved shower wall can help direct the water to the drain as well. The most important consideration is to make sure to slope the shower floor away from the shower entrance.

What is a good height for a shower niche?

about 48 to 60 inches

At what slope does water flow?

3 Answers. The minimum slope that I recommend is two percent, or 1/4 inch per foot. As an example, the grade at a spot four feet away from your house should be one inch lower than the grade next to your house. This will do for most houses with soil that will absorb water readily.

How high should a soap dish be in a tub?

around 48 to 60 inches

Does a shower curb need to slope?

The curb or lip around the bottom of the shower should to be slanted inward at a 5-degree (approx. 3/16″ to 1/4″) “pitch” or slope so water flows in toward the drain. (A level curb would cause the water to stand, while a curb angled away from the drain would cause water to leak onto the bathroom floor.)

What height should a shower mixer bar be?

between 36 and 48 inches


Last Updated: 3 days ago – Co-authors : 15 – Users : 7

Exit mobile version