Most concrete driveway installation costs between $1,800 and $6,000 or $4 to $15 per square foot. The average is just above $3,000 or $6 per square foot. Factors like location, size, decorative elements, potential reinforcement and removing the existing surface can all influence that range.
640 square feet
Beside this, How much does it cost to pour a 12×12 concrete slab?
How much does a 12×12 concrete slab cost? The average cost to pour a 12×12 concrete slab that is 4” thick is between $888 and $1,584, with professional labor and materials included.
Likewise, How much does a 10×20 concrete slab cost?
Slab Size Square Feet Average Cost
——— ———– ————
10×20 200 $1,200
12×12 144 $864
15×15 225 $1,350
16×20 320 $1,920
Also, How do you calculate square footage of a driveway?
To calculate square footage, you must Measure the length of your driveway in linear feet. Measure the width of your driveway in linear feet. Multiply the length x width to calculate the total square footage of your driveway.
How much does it cost to pave a 2000 sq ft driveway?
Paving an asphalt driveway costs $4,726 on average, with a typical range between $2,931 and $6,562. This project runs $7 to $13 per square foot, including $2 to $6 per square foot for materials and $5 to $7 per square foot for labor. If you need replacement, you’ll pay $8 to $15 per square foot.
17 Related Question Answers Found
How much does it cost to put in a concrete driveway?
A concrete driveway costs from $8 to $18 per square foot, depending on decorative colors and finishes. While a plain gray concrete driveway costs between $5 and $7 per square foot to install.
How much does it cost to pour a 12×20 concrete slab?
Size (in feet) Approximate Cost
————– —————-
12×12 $865
12×20 $1,440
20×20 $2,400
24×24 $3,460
How much would a 12×12 concrete patio cost?
Size in Feet Square Footage Price Range
———— ————– —————
10×10 100 $900 – $2,600
12×12 144 $1,200 – $3,000
12×14 168 $1,400 – $4,000
15×15 225 $1,800 – $5,500
How much does it cost to pave a 300 foot driveway?
Other sources estimate the cost to install an asphalt driveway to be between $2,300 and $10,300. Homeowners typically pay per square foot. Reibling adds the average cost per square foot is between $3.50 and $4.50. Some asphalt contractors may charge by the ton, with the cost ranging from $100 to $150 per ton.
Is it cheaper to pour your own concrete?
One of the least expensive ways to get concrete is to mix your own. You can buy bags of the mix from a home improvement store. Typically, you only have to add water for it to be ready to pour. … Otherwise, you risk getting a weaker concrete once it cures, which could lead to cracks or crumbles within a couple of years.
Is it cheaper to do asphalt or concrete a driveway?
Cost. The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. … In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation. Finishes, details and stains can increase the price tag to as much as $15.00 per square foot.
How much does it cost to pour your own concrete?
Concrete slabs typically cost about $6 per square foot, or between $4 and $8 per square foot including labor. That’s about $5,400, or between $3,600 and $7,200 for a typical 30- by 30-foot slab that’s 6 inches deep. Materials alone cost about $4 per cubic foot.
How much does it cost to build a 12×12 patio?
7×7 $250-$2,500
—– ————–
12×12 $750-$7,200
16×18 $1,450-$14,500
20×20 $2,000-$20,000
How much does it cost to pave a 100 foot driveway?
Other sources estimate the cost to install an asphalt driveway to be between $2,300 and $10,300. Homeowners typically pay per square foot. Reibling adds the average cost per square foot is between $3.50 and $4.50. Some asphalt contractors may charge by the ton, with the cost ranging from $100 to $150 per ton.
How much does a 12×12 paver patio cost?
Size Average Installation Cost
—– ————————-
10×10 $950 – $1,700
10×20 $1,900 – $3,400
12×12 $1,400 – $2,500
12×24 $2,700 – $4,900
How many pavers do I need for a 12×12 patio?
So, assuming your paver size is 12″ x 12″, multiply 12×12 and then divide 144 by the answer. You’ll find that 144 ÷ (12×12) = 1.0. That means you need one paver per square foot, which makes sense since a 12″ x 12″ paver is 1 square foot.
How do you measure a driveway on Google Maps?
– On your computer, open Google Earth.
– Search for a place, or select a location on the globe.
– On the left, click Measure. . …
– Click the map to set measurement points.
– To remove a point, on the right, click Undo .
– To complete your line measurement, double-click on your last point, or click Done .
Last Updated: 19 days ago – Co-authors : 13 – Users : 7
