How much does it cost to replace a furnace blower motor?

0
8
  1. On average nationwide, a furnace blower motor replacement costs $400 to $600, including parts and labor.
  2. A single-speed blower motor costs around $450 to replace while a variable-speed motor costs $600 or more.
  3. You’ll also need to budget labor, about $75 to $125 per hour.

Thus, How do I know if it’s the blower motor or the resistor? Typically, if the fan will work on some speeds but not on others, the resistor is suspect. Okay, let’s say there’s no melting going on, but your fan doesn’t work on all speeds. Typically, if the fan will work on some speeds but not on others, the resistor is suspect.

Additionally Is it hard to replace a blower motor? The replacement of the blower motor is common and straightforward, so most shops will perform the repair — many on the same day.

Can a furnace blower motor be repaired? Replacing a Furnace Blower Motor And all you need to make sure is that you have all the required parts according to the model and you are good to go with replacing the motor all by yourself. The Blower Furnace units are always designed in a way that you can replace the parts individually in case it goes faulty.

How long do furnaces usually last? A well-maintained furnace can last at least 15 to 20 years, but completing annual maintenance and being diligent with repairs can extend its life even longer.

What happens when the blower motor resistor goes out?

If the resistor shorts or fails, it may cause the blower motor to remain stuck on one fan speed. The heating and air conditioning systems may still function at one speed, however the resistor will have to be replaced in order for full functionality to be restored.

What happens if blower motor fails?

If the blower motor resistor fails, the blower motor will still work, but it will be stuck on one speed in most cases. If you remove the resistor completely, the blower motor fan will still work at one speed, in most car models. This is because usually the resistor is not used for the highest speed setting.

Can a bad blower motor cause no heat?

Problems with Your Blower Motor or Blower Motor Resistor Without it, there’s no circulation of air—hot, cold, or otherwise. The blower motor resistor is the part that controls the fan speed of the blower motor. Both of these components can fail, resulting in the heating system simply not working.

How much should it cost to replace a furnace blower motor?

On average nationwide, a furnace blower motor replacement costs $400 to $600, including parts and labor. A single-speed blower motor costs around $450 to replace while a variable-speed motor costs $600 or more. You’ll also need to budget labor, about $75 to $125 per hour.

How long do furnace blower motors last?

How Long Does a Furnace Blower Motor Last? Blower motors are designed to last just as long as your furnace itself, anywhere from 10 to 20 years. Just as with any HVAC system, the better maintained and serviced your equipment is by experienced HVAC technicians the longer it will last and the fewer repairs you’ll face.

How much does it cost to replace blower motor?

A blower motor replacement costs $300 to $900 on average if not under warranty or $200 to $400 for labor when under warranty. Replacing a large or variable-speed HVAC blower motor costs $600 to $1,500. Furnace or AC blower motor prices are $100 to $500 on average for the part alone.

Where is the reset button on furnace blower motor?

Locate the reset button on the furnace and press it to reset the furnace. It is usually located inside the blower compartment on the side of the blower motor. Be cautious as the housing may be hot. If the button is popped up, press it down.

How do you reset a furnace blower motor?

Locate the reset button on the furnace and press it to reset the furnace. It is usually located inside the blower compartment on the side of the blower motor. Be cautious as the housing may be hot. If the button is popped up, press it down.

Can you run furnace without blower?

The blower fan motor The furnace can produce heat inside the combustion chamber—but that heat won’t go anywhere if the blower fan isn’t running. Because there’s a danger of the furnace overheating without the blower fan, the furnace won’t operate unless the blower has power.

Why is my furnace blowing cold air when the heat is on?

If your furnace is blowing cold air in your home, this is a sign of an issue with the flame detector, gas supply, air filter, pilot light, or condensate lines. Many of these issues are able to be easily solved on your own by sanitizing or replacing components in the gas furnace.

Why is my furnace humming but not kicking on?

When a furnace blower motor hums but won’t start, the most common issue is a faulty run capacitor. This electrical part stores energy to boost the blower motor into starting. If the capacitor does not require replacement, the problem may be with the blower motor itself.

How much does it cost to replace a blower motor?

A blower motor replacement costs $300 to $900 on average if not under warranty or $200 to $400 for labor when under warranty. Replacing a large or variable-speed HVAC blower motor costs $600 to $1,500. Furnace or AC blower motor prices are $100 to $500 on average for the part alone.

Where is the blower motor on a furnace?

One of the hardest-working parts of your home’s furnace is the blower motor. In a gas forced air furnace, it’s located in a box at the base of the furnace next to the air filter, where it draws return air through the filter.

What is the difference between a fan motor and a blower motor?

What Is a Blower Motor? Unlike the condenser fan motor, the blower motor is located indoors. It’s the component that blows cool air through the ducts and into different parts of your home. So it’s essentially your air mover.

Where is the blower motor located in a furnace?

One of the hardest-working parts of your home’s furnace is the blower motor. In a gas forced air furnace, it’s located in a box at the base of the furnace next to the air filter, where it draws return air through the filter.

How do I know if I need to replace the blower motor or the resistor?

Signs of a Bad Blower Motor Resistor Loss of HVAC fan control (total or certain speeds) The fan only works on its highest speed setting. No air coming from vents. Intermittent or inconsistent fan speed.

LEAVE A REPLY

Please enter your answer!
Please enter your name here