| Coverage Chart | ||
|---|---|---|
| One Ton of Rock Covers: | One Cubic Yard of Soil or Wood Mulch Covers: | |
| 240 square feet | 1” deep | 300 square feet |
| 120 square feet | 2” deep | 150 square feet |
| 80 square feet | 3” deep | 100 square feet |
Thus, How much does 2 tons of rock cover? Product Coverage Chart
| Material | Amount | Coverage *(3” depth) |
|---|---|---|
| Decorative Rock | 1 ton covers | 75-85 sq. ft. * |
| (45-60 sq. ft. for 1 1/2″ – 3″ rock) | ||
| Lava Rock | 1 ton covers | 200 – 210 sq. ft.* |
| Driveway and Paver Base (Class 2, Class 5) | 1 ton covers | 65-75 sq. ft. * |
Additionally How do I calculate how many tons of rock I need? Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 21.6 (the amount of cubic feet in a ton). The final figure will be the estimated amount of tons required.
How do you calculate stone coverage? Multiply the length (L), in feet, by the width (W), in feet, by the height (H), in feet, and divide by 27. This number is how many cubic yards of crushed stone you need. When using this equation, make sure all your measurements are in feet.
What is the cheapest rock to use for landscaping? Pea Gravel – The Cheapest Stone on the Market! It is typically used as gravel for walkways, patios, and other places where foot traffic is high. Pea gravel is very useful in landscaping projects because it is a smooth stone. Pea gravel is one of the cheapest stones you can use in landscaping.
How do I calculate how much stone I need?
Multiply the length (L), in feet, by the width (W), in feet, by the height (H), in feet, and divide by 27. This number is how many cubic yards of crushed stone you need.
How many tons of stone do I need?
Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 21.6 (the amount of cubic feet in a ton). The final figure will be the estimated amount of tons required.
How heavy is a pallet of Fieldstone?
A full pallet weighs approximately 3000 lbs.
What does a pallet of Fieldstone weigh?
Full pallet contains 30 cu. ft. and weighs 3000 pounds.
How many tons is a pallet of stone?
How much does a pallet of stone weigh? Depending on the type of material on the pallet, a pallet weighs between 1 and 2 tons.
How do you stack fieldstone?
How many linear feet are in a pallet of Fieldstone?
If you stack them three high, a pallet will cover approximately 33 linear feet. If you stack them two high, a pallet will cover approximately 50 linear feet.
How is flagstone coverage calculated?
Multiply the length by the width to find the area of the space to be covered with stone. If the length of the patio was 8.5 feet and the width was 7.75, you’d multiply those numbers to come to 65.88 square feet. To account for sizing and waste, add 10 to 15 percent to your square footage.
How many square feet will a ton of limestone cover?
***Square foot coverage per ton ***
| Dry stacks | |
|---|---|
| 4″x6″, 6″x6″, 8″x6″ | 30 Sq. Ft Per Ton |
| 4″x8″ 6″x8″, 8″x8″, 10″x8″ | 20 – 23 Sq. Ft Per Ton |
| 4″x10″, 6″x10″, 8″x10″ 10″x10″, 12″x10″ | 15 – 17 Sq. Ft Per Ton |
| 4″x12″, 6″x12″, 8″x12″, 10″x12″ 12″x12″ | 10 – 12 Sq. Ft Per Ton |
How many sq ft are in a ton?
1 ton equals 12,000 BTU. That means that, on average, we will need 0.0016 tons per square foot.
…
Tonnage Table.
| Area (Square Feet): | BTU | Tonnage |
|---|---|---|
| 600 sq ft | 12,000 BTU | 1 Ton |
| 900 sq ft | 18,000 BTU | 1.5 Tons |
| 1,200 sq ft | 24,000 BTU | 2 Tons |
| 1,500 sq ft | 30,000 BTU | 2.5 Tons |
Is flagstone cheaper than concrete?
Laying stone will cost around $30 per square foot, while pouring, stamping and coloring concrete will cost around $15 per square foot. That means the overall cost for a concrete patio or walkway could be half that of flagstone.
How many tons is 1000 square feet?
On average you need 1 ton of cooling for every 1000 square feet of home.
How many tons is 1200 square feet?
| ZONE 1 | ZONE 5 | |
|---|---|---|
| 1.5 Tons | 600 – 900 sf | 700 – 1100 sf |
| 2 Tons | 901 – 1200 sf | 1101 – 1400 sf |
| 2.5 Tons | 1201 – 1500 sf | 1401 – 1650 sf |
| 3 Tons | 1501 – 1800 sf | 1651 – 2100 sf |
How many tons of #57 Stone do I need?
Calculate #57 Granite Stone
| Coverage (Square feet) | 400 | sq ft |
|---|---|---|
| Volume (Cubic yards) | 2.5 | cu yd |
| Estimated amount (Pounds) | 5,951 | lb |
| Estimated amount (Tons) | 2.98 | ton |
| Amount +15% compression | 3.42 | ton |
What is the difference between fieldstone and flagstone?
The basic difference between flagstone and fieldstone is that flagstone is quarried (comes from beneath the ground) and fieldstone is on top of the ground (or in the case of our Tennessee stone, it comes from the side of a mountain). This results in products that are different in color and texture.
Does flagstone need to be sealed?
Flagstone that is outdoors and is exposed to wind, rain, saltwater, chlorine, or any other harsh materials and/or natural elements need to be sealed for optimal longevity. Because flagstone is a porous material, a sealer will fill in the pores in the stone and provide it with a gorgeous finish.
What is a cheaper alternative to flagstone?
Stamped concrete is an inexpensive alternative to flagstone for a patio. When it comes to choosing a surface material for a patio, homeowners are often drawn to flagstone because of its elegant appearance. Its expensive price tag, however, also deters many people from selecting it, especially for use on larger patios.
