PopularAsk.net – Your Daily Dose of Knowledge

How much chlorine does it take to shock a 10000 gallon pool?

The Right Amount of Chlorine Shock to Use in Your Pool *For calcium hypochlorite or powder chlorine, 1 pound is ideal for every 10,000-gallon pool. In case of algae, triple-shock the pool by adding 3 pounds for every 10,000 gallons.

Read the full answer

2 pounds

Beside this, How much pool shock do I need?

You’ll need to first know the amount of water in your pool, give or take a few hundred gallons. If you aren’t sure, take some measurements and consult an online pool volume calculator. Generally speaking, the dosage amount of pool shock is 1 lb. per 10,000 gallons, but consult the shock package label.

Likewise, How much shock do I need for a 1000 gallon pool?

0.13 ounces

Also, How much shock do I need for 10000 gallons?

How much shock do I need to shock my pool? A simple ratio and a standard rule of thumb to follow when you shock your pool is to dissolve one pound of either calcium hypochlorite or sodium dichlor for every 10,000 gallons of pool water.

Can you over shock a pool?

You can, however, use more shock than you need – or less than is sufficient. In other words, while you shouldn’t worry too much about adding a little extra pool shock, there is still a right way and a wrong way to shock your pool if you want to get the best results.


24 Related Question Answers Found

 

How much chlorine do you need to shock a pool with algae?

The Right Amount of Chlorine Shock to Use in Your Pool *For calcium hypochlorite or powder chlorine, 1 pound is ideal for every 10,000-gallon pool. In case of algae, triple-shock the pool by adding 3 pounds for every 10,000 gallons.

Can you shock a pool everyday?

When do you shock a pool? To be very specific, you should use it when combined chlorine exceeds 0.2. To generalize this we recommend using it at least once a week and no less than every other week. It is also good practice if you do not have an automatic pool cover, to shock after heavy rains.

How high does chlorine kill algae?

Chlorine is a very effective sanitizer for water. When you maintain a swimming pool with 3ppm (parts per million) of chlorine, it will inhibit algae from growing.

How long should you run filter after shocking pool?

24 hours

Can you shock a pool too much?

You can, however, use more shock than you need – or less than is sufficient. In other words, while you shouldn’t worry too much about adding a little extra pool shock, there is still a right way and a wrong way to shock your pool if you want to get the best results.

Should I shock pool if chlorine is high?

If your total chlorine level is high, you will use a non-chlorine shock; if it is low, you will use a chlorinated shock. As a rule, you will need to raise free chlorine to 10 times your combined chlorine to hit what is known as “break point.” Therefore, it is good to deal with combined chlorine while it is still small.

What level of chlorine kills algae?

2-4 ppm

How many times a day can you shock a pool?

When do you shock a pool? To be very specific, you should use it when combined chlorine exceeds 0.2. To generalize this we recommend using it at least once a week and no less than every other week. It is also good practice if you do not have an automatic pool cover, to shock after heavy rains.

How much bleach do you put in a 10000 gallon pool?

If you need to calculate how much bleach or Clorox you need to shock your pool, you will have to use 1/2 gallon of bleach per 10,000 gallons of water to raise the chlorine levels by 5 ppm.

How many gallons does it take to shock a pool?

In this case, you should double shock your swimming pool water. To double shock, you will need to add 2 pounds for every 10,000 gallons of water. For instance, if you pool is 20,000 gallons, you will add 4 pounds of shock.

Will extra chlorine kill algae?

Green algae Some of them are found only in salt water, but others are found floating around in pools, ponds and rivers. Green algae is the easiest to get rid of, and can usually be treated successfully with a little extra chlorine or algaecide.

How much chlorine do I need for 10000 gallons?

12.5% Liquid Chlorine Pool Shock – Normal Dosage: 1 gallon of shock per 10,000 gallons of water.


Last Updated: 11 days ago – Co-authors : 11 – Users : 9

Exit mobile version