- A ton of asphalt yields 0.5 cubic yards or 13.5 cubic feet volume.
Subsequently, How do you calculate asphalt cost? Asphalt is usually priced by square foot. The cost per ton is $40 to $80 and per square foot is $0.75 to $2.00. The cost is determined by the size of rock in the asphalt, volume ordered, delivery cost, and the location of the work being performed.
How thick should asphalt be? Residential driveways typically use 2 to 3 inches of asphalt with 3 being suitable for occasional large trucks or heavy equipment. Underneath the asphalt you should have 6 to 8 inches of granular base aggregate. Underneath this you have soil.
Yet, How many tons of asphalt are in a dump truck? A typical tandem dump truck is limited to about a 13-ton payload in accordance with federal bridge law. Increased truck capacity is important when directly unloading into the asphalt paver.
What does 1 square yard of asphalt weigh? If you are looking to calculate the asphalt weight per yard, Willie’s Paving notes that 1 cubic yard of hot asphalt mix weighs 2.025 tons. If you are calculating yards to tons of asphalt, multiply your cubic yard value by 2.025 tons to determine the project’s amount.
How much is a 700 ft driveway?
For example, a driveway 15 feet wide by 700 feet long with a six inch base will need approximately 25 tons of gravel, at a material cost of about $700. With delivery, the total cost will be around $1000. The cost of pouring a concrete driveway depends on the quality of the concrete.
How many square feet will 1 ton of asphalt cover 2 inches thick?
With 2 inches of material, one ton of asphalt covers approximately 80 square feet and 160 square feet with 1 inch of material.
Is 2 inches of asphalt enough for a driveway?
Residential driveways typically use 2 to 3 inches of asphalt with 3 being suitable for occasional large trucks or heavy equipment. Underneath the asphalt you should have 6 to 8 inches of granular base aggregate. Underneath this you have soil.
What is the most cost effective driveway?
Of the four paving materials described in this guide, aggregate (gravel) is the least expensive, followed by asphalt, concrete, and paving stones. If you’re installing your driveway on a shoestring budget, gravel is your best choice.
What is the best thickness for an asphalt driveway?
A 4-inch thickness may be adequate, but 5 or even 6 inches of full-depth asphalt will assure you of a stronger, stable driveway under a wider range of climate and loads. As an option, some contractors use 6 to 8 inches of compacted aggregate, or gravel, as a base under 3 inches of asphalt pavement.
How do you prepare the ground for an asphalt driveway?
The Complete 7-Step Process for Asphalt Pavement Installation
- Step 1: Demolition and Removal. …
- Step 2: Grading and Sloping. …
- Step 3: Prepare the Sub Base. …
- Step 4: Proof Roll, Undercutting and Sub Base Repair. …
- Step 5: Binder and Surface Course. …
- Step 6: Install New Asphalt Surface. …
- Step 7: Butt Joints and Transitions.
What is the best grade of asphalt?
There are three different grades available in asphalt. The grades available are I-2, also known as base; I-5, known as top ;and the I-4 or commercial top grades.
Is there a cheaper alternative to asphalt?
Gravel. This is one of the cheapest alternatives to asphalt driveways by far, costing very little to have installed. The average gravel driveway consists of hard, angular gravel laid throughout the driveway.
What is the life expectancy of an asphalt driveway?
The life expectancy varies based on climate, traffic, and maintenance. It is possible to have asphalt pavement last 25-30 years, but this depends on how strong the base is, the soil types underneath, how well those soils drain, how think the original road, parking lot, or drivewaywas paved.
What is the best low maintenance driveway?
Low-Maintenance Driveway Options
- Paving Stones. Paving stones are known to last up to a full century if properly laid. …
- Concrete Grass Pavers. An interlocking concrete grass paver driveway made may be an option for your driveway. …
- Plastic Permeable Pavers.
What is the cheapest option for a driveway?
A gravel driveway is by far the cheapest and quickest to install, especially if the existing driveway’s sub-base is sound.
What is the least expensive way to pave a driveway?
Of the four paving materials described in this guide, aggregate (gravel) is the least expensive, followed by asphalt, concrete, and paving stones. If you’re installing your driveway on a shoestring budget, gravel is your best choice. If you have more wiggle room, you’ll have more choice.
How much does a driveway add to property value?
You may be considering if the driveway is worth cleaning up, or about adding one to your home. You may be surprised to learn that a driveway does add value to your home. On estimate a driveway can increase your property’s value by 5-10%. That is quite a bit for an area you do not really need to pay a lot to revamp.
How can I save money on my driveway?
Use Local Concrete Save money on your driveway by substituting one raw concrete material for another, particularly if one type of concrete is fabricated exclusively for your geographic area and costs less to make.
What is the cheapest way to do a driveway?
A gravel driveway is by far the cheapest and quickest to install, especially if the existing driveway’s sub-base is sound.
How thick should an asphalt driveway be?
Residential driveways typically use 2 to 3 inches of asphalt with 3 being suitable for occasional large trucks or heavy equipment. Underneath the asphalt you should have 6 to 8 inches of granular base aggregate. Underneath this you have soil.
Can I asphalt my own driveway?
The process of paving with asphalt is not difficult, but proper asphalt installation requires heavy equipment that most homeowners do not possess. You might not be able to install asphalt by yourself, but understanding the operation will allow you to ensure that your hired contractor is doing it correctly.
What is the most expensive driveway material?
4: Brick Pavers. These are the most expensive type of driveway, mostly because of the cost of the materials and the time it takes to lay the bricks or stones. However these do have a huge visual impact and can vastly improve the look of your home.
What is the best base for asphalt?
A good crushed gravel base beneath the blacktop is the secret to a long-lasting driveway. The base is the foundation for a durable driveway, making it critical to pick the right base material. Installing crushed, granular based gravel on a compacted subgrade is the best start to a strong base.
