PopularAsk.net – Your Daily Dose of Knowledge

How many sq ft are in a ton?

1 ton equals 12,000 BTU. That means that, on average, we will need 0.0016 tons per square foot.

Tonnage Table.

Area (Square Feet): BTU Tonnage
600 sq ft 12,000 BTU 1 Ton
900 sq ft 18,000 BTU 1.5 Tons
1,200 sq ft 24,000 BTU 2 Tons
1,500 sq ft 30,000 BTU 2.5 Tons

Thus, Is flagstone cheaper than concrete? Laying stone will cost around $30 per square foot, while pouring, stamping and coloring concrete will cost around $15 per square foot. That means the overall cost for a concrete patio or walkway could be half that of flagstone.

Additionally How many square feet will 2 tons of gravel cover? Using 2 inches for the depth, the following measurements are a guide to the amount of gravel coverage per ton: 1/4 to 1/2 inch gravel, 100 square feet per ton; 1/2 to 1 inch gravel, 90 square feet per ton; and 1 1/2 to 2 inches gravel, 80 square feet per ton.

How many tons is 1200 square feet?

ZONE 1 ZONE 5
1.5 Tons 600 – 900 sf 700 – 1100 sf
2 Tons 901 – 1200 sf 1101 – 1400 sf
2.5 Tons 1201 – 1500 sf 1401 – 1650 sf
3 Tons 1501 – 1800 sf 1651 – 2100 sf

How many tons is 1000 square feet? On average you need 1 ton of cooling for every 1000 square feet of home.

What is a cheaper alternative to flagstone?

Stamped concrete is an inexpensive alternative to flagstone for a patio. When it comes to choosing a surface material for a patio, homeowners are often drawn to flagstone because of its elegant appearance. Its expensive price tag, however, also deters many people from selecting it, especially for use on larger patios.

What do you use to fill in between flagstone?

Rocks. Small stones, gravel, and crushed gravel are all commonly used as a flagstone filler. They are both a practical and aesthetically pleasing filler solution as they reduce weed growth and bug infestations.

Does flagstone need to be sealed?

Flagstone that is outdoors and is exposed to wind, rain, saltwater, chlorine, or any other harsh materials and/or natural elements need to be sealed for optimal longevity. Because flagstone is a porous material, a sealer will fill in the pores in the stone and provide it with a gorgeous finish.

How many square feet are in a ton of stone?

Stone by the Ton One Ton of Stone Cover in Square Feet 240 sq. ft.

How do I calculate how much stone I need?

Multiply the length (L), in feet, by the width (W), in feet, by the height (H), in feet, and divide by 27. This number is how many cubic yards of crushed stone you need.

What area will a ton of gravel cover?

A ton of gravel will cover approximately 100 square feet, 2 inches deep.

What is the best material to put between flagstone?

Rocks: You can use small rocks to fill large gaps, and gravel or crushed rock can be used to fill smaller gaps. Mulch: Bark and lightweight chunks of mulch are a great option for in-between flagstone. Cocoa shell mulch is small and curls, for a unique look.

Does flagstone break easily?

Flagstone won’t crack, and it won’t shift position because of the changing temperatures. The stone is easy to maintain. You don’t have to do anything to flagstone to keep it looking good except sweep it or spray it down. If any stains set in, such as from mold, you can remove them with a mix of bleach and water.

Can I lay flagstone directly in soil?

The natural stone, with its jagged edges, gives outdoor spaces a defined yet rustic look. Because flagstone is fairly heavy it can be laid directly on dirt, allowing low growing plants to grow in between.

What do you fill in between flagstone?

Rocks. Small stones, gravel, and crushed gravel are all commonly used as a flagstone filler. They are both a practical and aesthetically pleasing filler solution as they reduce weed growth and bug infestations.

How do you keep weeds from growing in flagstone?

Weeds want to inhabit a cool damp environment; proper drainage will help avoid weed growth. Regular Sweeping. Brushing your paving stones will prevent seedlings from settling, and will disrupt new weeds from fully establishing a place between your pavers.

What kind of sand do you put under flagstone?

Dry-Laying Flagstone in Sand It is recommended that a patio or walkway base be at least 3” deep, then filled with a layer of compacted gravel covered with coarse sand.

Can I lay flagstone over grass?

The end goal is to have the top of your flagstone piece lie level with the line of your lawn (the top of the ground before the grass blades shoot up). Removing 4”-6” of dirt, depending on the thickness of your flagstone, will allow you to add enough sand to provide a leveling surface for the flagstone.

Exit mobile version