40’OVERALL LENGTH | 34’ABOVE GRADE
| i | Pole Chart Legend | |
|---|---|---|
| POLE CATALOGUE NUMBER | OVERALL LENGTH (FT.) | NOMINAL POLE WEIGHT (LBS.) |
| HA-400-C | 40 | 3361 |
| HA-400-D | 40 | 3376 |
| HA-400-E | 40 | 3386 |
Thus, How do you calculate pole weight?
Additionally How much does a 100 foot Douglas fir weigh? It is safe to say that a single 100-foot pine tree with a diameter of 30 inches (76cm) could weigh up to 18,500lbs (8,391kg)! It’s no wonder these trees are so resilient and indestructible!
What is a Class 5 utility pole? H5 poles can range from 45 to 125 feet tall and are no less than 37 inches in circumference at their tip. The lower the number after the H the smaller the pole. The sizes go down incrementally by two inches of tip circumference.
How much does a 20 light pole weigh? Net weight: 98 lbs.
How much of a pole should be in the ground?
Calculating the Depth of the Pole Poles are typically set into the ground: 10% of the overall height + 2 feet, except in questionable soil conditions. Example: Overall pole height: 30 feet, the pole should be buried: 3 feet + 2 feet = 5 feet below grade, and 25 feet above grade.
How can I calculate weight?
Weight is a measure of the force of gravity pulling down on an object. It depends on the object’s mass and the acceleration due to gravity, which is 9.8 m/s2 on Earth. The formula for calculating weight is F = m × 9.8 m/s2, where F is the object’s weight in Newtons (N) and m is the object’s mass in kilograms.
How do you calculate the weight of a metal?
Once you have the measurements for the sectional area, length and density of your metal, you can now determine the weight using the following metal weight calculation formula: Weight (kg) = Sectional Area (mm2) x Length (m) x Density (g/cm3) x 1/1,000.
How heavy is a light pole?
Highlights:
| Pole Height | 25 feet | Gauge |
|---|---|---|
| Shaft Diameter Bottom | 6 inches | Shaft Diameter Top |
| Square Base Plate Width | 11.5 inches | Base Plate Thickness |
| Pole Weight | 205 pounds | Maximum EPA at 90 MPH |
How much does an iron pole weigh?
Ductile iron poles weigh approximately 45 percent less than wood and 25 percent more than steel. Our heaviest pole weighs approximately 3,200 pounds. As a result, your existing equipment is ideal for installations.
How much does a steel pole weigh?
The average steel distribution pole (40 foot, Class 4) weighs approximately 450 pounds, and is at least 30 percent lighter than a wood pole.
How much does a 45 ft utility pole weigh?
45’OVERALL LENGTH | 38’6″ABOVE GRADE
| i | Pole Chart Legend | |
|---|---|---|
| POLE CATALOGUE NUMBER | OVERALL LENGTH (FT.) | NOMINAL POLE WEIGHT (LBS.) |
| HA-450-E | 45 | 4151 |
| HA-450-F | 45 | 4176 |
| HA-450-G | 45 | 5385 |
