Just Add Hose Weights Just add weights to the hose and give the surface robot 2 inches of clearance. Depending on the length of the hose and whether there is a basket, you will need anywhere from two to four hose weights. Hose weights come in different gauges and colors.
For pools of 4-7′ deep, use 2 weights, one 4″ to 12″ from the cleaner and one 6′ from the cleaner. For pools from 8′ to 12′ deep, use a third weight, placed 10 ft. from the swivel end of the cleaner. Balancing the Kreepy hose is the term for adjusting the Kreepy weights, to balance the hose and cleaner in the water.
Beside this, Where do weights go on kreepy krauly hose?
Hose weight placement depends on the depth of the pool. For pools 4′ deep or less, use 1 hose weight 4″ to 12″ from the cleaner. For pools of 4-7′ deep, use 2 weights, one 4″ to 12″ from the cleaner and one 6′ from the cleaner. For pools from 8′ to 12′ deep, use a third weight, placed 10 ft.
Likewise, What do pool hose weights do?
Simply put, you need to add weight to your pool cleaner in order to keep it on the pool floor and assist it in reaching certain pool areas. … Hose weights help to keep the head of the cleaner flush with the floor of your swimming pool and able to suck up all the dirt that makes its way there.
Also, How do you fill a pool vacuum hose?
Where do I put the weight on my pool cleaner?
Hose weight placement depends on the depth of the pool. For pools 4′ deep or less, use 1 hose weight 4″ to 12″ from the cleaner. For pools of 4-7′ deep, use 2 weights, one 4″ to 12″ from the cleaner and one 6′ from the cleaner. For pools from 8′ to 12′ deep, use a third weight, placed 10 ft.
20 Related Question Answers Found
Why do I lose suction when vacuuming pool?
One of the most common would be air in the hose. … Another common issue is a clogged vacuum hose. Another thing, when you attach that vacuum hose and increases the suction pressure, this could cause the hose that runs from the pool and the intake of your pump to collapse.
How do I keep my pool hose from tangling?
– Bake in The Sun. Some of the cables and hoses tangle because of stiffness. …
– Reduce The Hose Length. Another way to deal with tangling problem is by checking the hose length. …
– Checkout The Connectors. Hose segments allow the hose to move freely.
Where do you put the weights on a pool hose?
For pools 4′ deep or less, use 1 hose weight 4″ to 12″ from the cleaner. For pools of 4-7′ deep, use 2 weights, one 4″ to 12″ from the cleaner and one 6′ from the cleaner. For pools from 8′ to 12′ deep, use a third weight, placed 10 ft. from the swivel end of the cleaner.
How do you hook up a creepy crawler?
How do you keep a pool Polaris hose from tangling?
How do I put water in my pool vacuum hose?
How do I keep my pool cleaner cord from tangling?
How do I add water to my pool pump?
How do you keep Polaris from tangling?
BoDarville. The hose and swivel connectors are the first items I would check. Over time, the swivel connectors can become stiff and prevent the hose from turning freely thereby increasing the likelihood of tangling. I would also make sure the hose is not too long.
How do pool creepy crawlers work?
A Kreepy Krauly draws water from the bottom, top and sides of your pool ensuring circulation of pool water and improving water quality. This helps remove biological particles and fine particles that can cause your pool to look cloudy.
How long do kreepy krauly last?
2-3 years
Why is my kreepy krauly not moving?
If Kreepy Krauly is not moving or not pulsating. Check that the main drain and all suction lines are closed, except for the suction line to which Kreepy Krauly is attached (usually a skimmer). … Check for debris in Kreepy Krauly flapper. Debris may prevent flapper movement.
Last Updated: 12 days ago – Co-authors : 7 – Users : 4