Unplug the range for 3 minutes to reset the oven electronic control board. If the code appears after you plug the range in, unplug the range and secure any loose wiring connections. Replace any damaged wire harnesses.
Which means error code C -31. Error code C-31 means the following – the circuit board of the electric range, was overheated. The printed circuit board was exposed to temperatures in excess of normal. Because the PCB has been overheated, this can lead to a critical fault, which in turn is unsafe and can lead to a fire.
Beside this, How do I get my Samsung range out of tESt mode?
– Make sure the door hasn’t been left open. The oven will shut off if the door is left open for too long. …
– Confirm you’re not in demo mode. If you’re in demo mode, the display will show tESt (or tE 5t). …
– Check the gas pressure (for gas ranges). …
– Turn off the circuit breaker for 30 seconds, then turn it back on.
Likewise, How do I take my oven off demo mode?
– Press SETTINGS/CLOCK until “DEMO MODE” is displayed.
– The current setting will be displayed.
– Press the “1” keypad to adjust the setting.
– Press START or CANCEL to exit and display the time of day.
Also, How do I take my Samsung oven off demo mode?
4 Press one of the numeric buttons (1 or 2) to select a setting: Press 1 to turn Demo mode ON. Press 2 to turn Demo mode OFF.
What is demo mode on KitchenAid oven?
Setting Demo Mode for an Over the KitchenAid Range Microwave The Demo Mode (on some models) is ideal for learning how to use the KitchenAid microwave oven. … The microwave oven light will come on, the fan will run and, if on, the turntable will rotate.
15 Related Question Answers Found
Do ovens have a reset button?
Your oven might also have a circuit breaker with a reset button on the control console or on top of the oven that needs to be reset. If you are still confounded, pull the oven away from the wall. If it is a range/oven combo, make sure it is plugged securely into the wall.
Why did my oven just stopped working?
An oven that won’t heat is usually the result of a faulty igniter (for a gas oven) or heating element (for an electric oven). If both your gas oven and your gas burners have stopped working, the problem is most likely with the gas line, and will require professional repair.
How do I fix my Samsung oven SE error?
Error SE means that the touch control panel is shorted. If unplugging the oven for 5 minutes won’t reset the error permanently then you need to replace the touch control panel NOT the circuit board.
What does C do mean on Samsung oven?
Samsung Range Error Code = C-d0 Error Code Definition = Stuck Key. Parts Needed To Repair = Membrane Switch Panel.
Why did my oven suddenly stop working?
An oven that won’t heat is usually the result of a faulty igniter (for a gas oven) or heating element (for an electric oven). If both your gas oven and your gas burners have stopped working, the problem is most likely with the gas line, and will require professional repair.
How do I know if my oven fuse is blown?
If a fuse is blown, the metal fusible link under the glass will often be broken and blackened. If a fuse is not visibly blown, you can check it with a multimeter. Set the meter to continuity test; place one test lead on a fuse’s threaded base and the other on its metal tip.
Why won’t my oven work but burners do?
If the oven is not working, but the burners do, check the following: Make sure that the oven controls are set correctly for either bake or broil. On self-clean ranges, check the oven door to make sure it is in the unlocked position. … Turn your range OFF and either remove the fuses or turn the breaker OFF.
How do you get a Samsung range out of demo mode?
– Touch Options.
– Touch 8.
– Touch 2 to turn demo mode off.
– Touch START/SET to validate the new setting.
How do I turn off demo mode?
– On the supplied remote control, press the HOME button.
– Select Settings or the icon.
– Follow the steps according to your TV menu. Select Device Preferences → Retail mode settings → set Demo mode and Picture reset mode to Off. …
– Set Demo mode and Picture reset mode to Off.
How do I turn off demo mode on my Samsung TV?
All you have to do is press the “Tools” button on the remote and then scroll down until you see the “Store Demo Off” option. Select that, and your TV will leave the demo mode just like that.
What does FO mean on a stove?
failed electronic control board
How do you reset a KitchenAid oven?
– Power unit down by turning off the circuit breaker(s) for one (1) minute.
– Power unit up by turning on the circuit breaker(s).
– Start a bake cycle.
– Monitor the oven for one (1) minute to ensure the error code does not display again.
– Verify oven operation.
Last Updated: 8 days ago – Co-authors : 14 – Users : 5
