How do you put a Maytag Bravos washing machine in diagnostic mode?

0
5430

– The washing machine should be in standby (off) mode.
– Press and release the following buttons within 4 seconds. …
– if successful “dt” should display on the washing machines indicator.
– Whithin 5 seconds press “Start” all indicator lights should come on and 88 should be displayed.

Read the full answer

Unplug the washer for 1 minute from the electrical outlet. Plug the washer back in and lift and lower the lid 6 times within a 12 second period. You have 30 seconds to start lifting and lowering the lid.

Beside this, How do I troubleshoot my Maytag Bravos washer?

– Open the lid if the washer severally vibrates during spinning and redistribute the load. …
– Adjust the feet on the appliance if it continues to rock or vibrate during spinning. …
– Check for a coin, bobby pin or some other metallic object not removed from a clothing pocket if you hear clicking noises coming from the machine.

Likewise, Why is my Maytag Bravos washer not spinning?

One common cause why a Maytag top load washer won’t spin is due to an uneven load or jammed clothing. … Try to redistribute the load or remove a few articles of clothing and run the spin cycle on your washer again. If this doesn’t help, check outside the washer drum for jammed clothing and remove them.

Also, What causes the spin cycle to stop working on a washer?

An unbalanced load of laundry is one of the most common causes of an inadequate spin cycle. Sometimes clothing can settle on one side of the drum, throwing off the motion of the washing machine. … If you suspect a distribution problem, try rearranging your clumped-up wet laundry and running the spin cycle again.

Also Read  Who makes the best model kits for cars?

How do you run diagnostics on a Maytag Bravos washer?

– The washing machine should be in standby (off) mode.
– Press and release the following buttons within 4 seconds. …
– if successful “dt” should display on the washing machines indicator.
– Whithin 5 seconds press “Start” all indicator lights should come on and 88 should be displayed.


17 Related Question Answers Found

 

How do you run a diagnostics and read error code on a Maytag washer?

How do I reset my Maytag Bravos washing machine?

Unplug the washer for 1 minute from the electrical outlet. Plug the washer back in and lift and lower the lid 6 times within a 12 second period. You have 30 seconds to start lifting and lowering the lid.

How do you put a washing machine in self test diagnostic mode?

How do you run a diagnostic test on a Maytag washer?

– The washing machine should be in standby (off) mode.
– Press and release the following buttons within 4 seconds. …
– if successful “dt” should display on the washing machines indicator.
– Whithin 5 seconds press “Start” all indicator lights should come on and 88 should be displayed.

Why is my Maytag washer not starting?

If the washer overheats, the thermal fuse will blow. If the line fuse blows, the washer won’t start. To determine if the thermal fuse is at fault, use a multimeter to test it for continuity. If the fuse does not have continuity, replace it.

How do I test my Maytag washer?

Now you can do run a Maytag Centennial automatic diagnostic washer cycle. You will need to start the diagnostics mode again, but this time turn the Centennial washer’s cycle knob right until only the “spin” light is lit and press “start”. The washer will do a quick cycle that will test all the washer functions.

Also Read  Does AirPlay work with iPhone?

How do you clear the codes on a Maytag Bravos washer?

Write Down The Error Code! Then press PAUSE/CANCEL once to clear the error code and try to start a new cycle. If code appears again put it through an automatic diagnostic cycle while you enjoy a nice soothing cup of tea.

How do I put my Samsung Washer in diagnostic mode?

Is there a reset button on Maytag washing machines?

Likewise, people ask, is there a reset button on a Maytag washer? … Plug the washer back in and lift and lower the lid 6 times within a 12 second period. You have 30 seconds to start lifting and lowering the lid.

How do you reset the error code on a Maytag washer?

To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.

How do I calibrate my Maytag Bravos washer?

How do I calibrate my washing machine?

– Remove all laundry or any other contents in the machine.
– Press POWER on the control panel of the lower washer to turn the washer on.
– Press and hold Temp. …
– Press START/PAUSE on the lower washer control panel to start Calibration.
– When complete, the lower washer turns off automatically.


Last Updated: 6 days ago – Co-authors : 12 – Users : 4

LEAVE A REPLY

Please enter your answer!
Please enter your name here