Place your front wheel so the axle would be about 3 inches in front of the broomstick, then measure from the bottom of the frame neck to the axle hole in the wheel. This number will be your guide for the springer length you need. About 22″ indicates you need a stock length springer.
Springer Advantages: not many, the springer front end IMHO hangs around because it still makes money for Willie G and crew. It looks and feels old, a kinder word would be nostalgic. It takes one back to the good ol days. You should definitely try and ride one, to compare to modern era of oil/air shock.
Also, What is the stock length of a Springer front end?
As a reference, on this springer that measurement is 22″, considered as the stock size.)
Hereof, How do you measure fork tube length?
Fork lengths measured in inches from the bottom of the lower fork bearing cup (or a point parallel to it on the fork tube) to the center of the axle hole.
What is the length of a fork?
about 7 inches
Likewise, How do you measure steerer tube length?
– Steerer length- which is from the headset crown lower race’s seat to the top of the steerer and allows for the head tube length, the headset thickness (or usually called “stack height”) and any stem and/or spacers if a threadless design.
25 Related Question Answers Found
How do you measure forks on a motorcycle?
Fork length is measured from the base of the frame neck to the center point of the axle mounting hole. For any off-the-shelf motorcycle this standard measurement for the front forks is considered stock length.
How are bike forks measured?
The length of the fork is usually measured parallel to the steerer tube from the bottom of the lower bearing race to the center of the front wheel axle.
How do you measure a motorcycle trail?
Trail (B) is measured in distance (inches or millimeters) between the point of the front wheel’s contact with the ground and a line drawn through the axis of the steering head. Under normal operation, this contact point is always some distance behind the projected line—somewhere between 2 and 4 inches (5–10 cm).
Does Harley still make a Springer?
Harley-Davidson SPRINGER SOFTAIL Motorcycles.
How are bicycle forks measured?
The length of the fork is usually measured parallel to the steerer tube from the bottom of the lower bearing race to the center of the front wheel axle.
Are all bike forks the same size?
OK basically fork lengths to the head tube are the same give or take. the height is built into the head tube. A touring fork will have a bit more clearance than a pure racer for fenders and stuff, likewise a cross bike. The critical measurements are head tube / steerer tube lengths and of course diameter.
How do you assemble a Springer front end?
How do you fill the front forks on a motorcycle?
How do motorcycle front forks work?
No answer yet
Are all mountain bike forks the same size?
Mountain bike forks come in three wheel sizes: 26in, 27.5/650B and 29in. If you have 27.5/650B or 29in wheels then you need the corresponding size fork.
What years did Harley make the Heritage Springer?
Harley-Davidson designed the Heritage model to evoke its past, specifically of the late 1948 models. The air-cooled 80 CI V-twin held no surprises for Harley-Davidson riders in 1997, and it would have felt familiar to riders in 1948 as well.
What is the most valuable Harley Davidson?
$2.4 million Harley-Davidson the most expensive motorcycle in the world.
Last Updated: 4 days ago – Co-authors : 7 – Users : 4