If you can’t get the flame to light at all, and you’re sure the gas is on, there’s probably an obstruction in the pilot tube. If the flame lights and goes out when you release the gas control knob after holding it in for the recommended 20 to 30 seconds, that’s the sign of a thermocouple malfunction.
It’s easy to replace and a new one costs $5 to $10. Rather than trying to unfasten the thermocouple inside the water heater’s burning chamber, it’s easier to remove the whole burner and thermocouple assembly. … Then unfasten the three nuts that hold the thermocouple and the two gas tubes to the valve.
Beside this, Can you fix a thermocouple?
If the pilot remains lit, but the main furnace doesn’t stay lit, it’s time to replace the thermocouple. Replacement thermocouples are in stock at most hardware and home improvement stores. Because they come in different sizes, take your faulty thermocouple to the store with you so you can make a correct match.
Likewise, How much should a plumber charge to replace a thermocouple?
Thermocouple – $20 to $150 The thermocouple is an apparatus that senses whether the pilot light is lit and triggers the gas control valve. Repairs typically cost about $150 to have it done professionally, though a new thermocouple itself only costs about $20 on average.
Also, What causes a thermocouple to go bad?
The presence of oxygen causes a reaction in the thermocouple that can wear down the part and make the wires become thinner and more brittle. Oxidation can be caused by a small amount of oxygen making its way into a sealed environment and reacting with the pure metal of the thermocouple.
How do you replace a bad thermocouple?
19 Related Question Answers Found
How do I know if my thermocouple is working?
If the thermocouple is working, you should be able to measure 30 to 40 millivolts of voltage at the connection end of the tube when the pilot flame is on. You can test this yourself using a multimeter, but you may need a helper to keep the pilot flame burning while you do it.
How long should a thermocouple last?
one year
What happens if a thermocouple fails?
The thermocouple is usually placed very close to the pilot light and may even be a part of the same component, depending on the nature of your water heater. Normally when the thermocouple malfunctions or isn’t working, it simply shuts off gas to your heater.
What are the symptoms of a bad thermocouple?
If you can’t get the flame to light at all, and you’re sure the gas is on, there’s probably an obstruction in the pilot tube. If the flame lights and goes out when you release the gas control knob after holding it in for the recommended 20 to 30 seconds, that’s the sign of a thermocouple malfunction.
Can I replace a thermocouple myself?
It’s easy to replace and a new one costs $5 to $10. Rather than trying to unfasten the thermocouple inside the water heater’s burning chamber, it’s easier to remove the whole burner and thermocouple assembly. … Then unfasten the three nuts that hold the thermocouple and the two gas tubes to the valve.
Can you clean a thermocouple?
The best way to clean your thermocouple is to use either a piece of steel wool or the coarse side of a sponge to gently clean off any soot or other remnants. You can use a pencil eraser to clean between the threads of the screw that connects the thermocouple to the control valve of your system.
Why does the thermocouple go bad?
Soot buildup on the thermocouple may block the flame. Under constant exposure to a hot flame, a thermocouple wears down over time. Even a slight residue can make the thermocouple malfunction.
Can a thermocouple be cleaned?
The best way to clean your thermocouple is to use either a piece of steel wool or the coarse side of a sponge to gently clean off any soot or other remnants. You can use a pencil eraser to clean between the threads of the screw that connects the thermocouple to the control valve of your system.
How do you clean a dirty thermocouple?
Use a screwdriver to loosen the screws and remove the thermocouple from the pilot assembly for cleaning. Use a piece of steel wool or the abrasive side of a sponge to gently remove the soot without damaging thermocouple. Avoid using cleaning products, especially those containing flammable chemicals.
How do you fix a bad thermocouple?
Can you sand a thermocouple?
Clean the thermocouple – using the emery cloth sandpaper, sand the ends of the thermocouple and then give it a finishing touch with the lint-free cloth.
Do thermocouples wear out?
Like the other component parts in your furnace, the thermocouple can wear down over time, producing lower voltage than it should when heated. And the worst part is that you can have a bad thermocouple without even knowing. Therefore, inspecting and testing your thermocouple should be part of your furnace maintenance.
Last Updated: 6 days ago – Co-authors : 4 – Users : 9