A good general rule for placement is to divide the height of the ceiling by two. The result is the amount of space to leave between each light. For example, recessed lighting spacing for an 8-foot-high ceiling would be 4 feet between each light. This will provide good spacing for general room lighting.
The typical rule-of-thumb is 24″ from each wall, and then 3-5 feet between cans. So in a 12′ room you’d probably want two rows of lights. Considering it is a bedroom and you don’t need it as bright as a kitchen, you can probably get away with 2 rows of 4 lights for a total of 8.
Beside this, How many can lights for a 12×12 room?
The typical rule-of-thumb is 24″ from each wall, and then 3-5 feet between cans. So in a 12′ room you’d probably want two rows of lights. Considering it is a bedroom and you don’t need it as bright as a kitchen, you can probably get away with 2 rows of 4 lights for a total of 8.
Likewise, How many 6-inch recessed lights do I need?
A common rule of thumb is that you use one recessed light for every 4 to 6 square feet of ceiling space. Doing so provides even, overall illumination. This is an important rule to keep in mind when you are going to rely exclusively on recessed ceiling lights to illuminate your kitchen.
Also, How do you calculate how many LED recessed lights are needed?
A good general rule for placement is to divide the height of the ceiling by two. The result is the amount of space to leave between each light. For example, recessed lighting spacing for an 8-foot-high ceiling would be 4 feet between each light. This will provide good spacing for general room lighting.
How many 4 inch recessed lights do I need?
A common rule of thumb is that you use one recessed light for every 4 to 6 square feet of ceiling space. Doing so provides even, overall illumination. This is an important rule to keep in mind when you are going to rely exclusively on recessed ceiling lights to illuminate your kitchen.
23 Related Question Answers Found
What size recessed lighting for bedroom?
The typical rule-of-thumb is 24″ from each wall, and then 3-5 feet between cans. So in a 12′ room you’d probably want two rows of lights. Considering it is a bedroom and you don’t need it as bright as a kitchen, you can probably get away with 2 rows of 4 lights for a total of 8.
How many 4-inch recessed lights do I need?
A common rule of thumb is that you use one recessed light for every 4 to 6 square feet of ceiling space. Doing so provides even, overall illumination. This is an important rule to keep in mind when you are going to rely exclusively on recessed ceiling lights to illuminate your kitchen.
How many can lights do you need in a room?
Measure your room to see how many fixtures you will need. A common rule of thumb is that you use one recessed light for every 4 to 6 square feet of ceiling space.
How many recessed lights can I put on one switch?
The main limitation to the number of recessed fixtures you can run at the same time is the rating of the circuit breaker that controls the circuit. Each fixture with a 60-watt incandescent or halogen bulb draws about 1/2 amp, so a 15-amp breaker for a standard lighting circuit would be able to handle 30 of them.
Can you have too many recessed lights?
It often seems that installing recessed lights is a cure all, but they cannot properly wash light upon walls and all dark corners, which would bounce reflective light into the room. In fact, using too many recessed light may leave areas of your room dark and may even cost you more on your electric bill.
What is the most common size for recessed lighting?
Recessed lights are categorized by their size. The most common residential sizes are 4-inch, 5-inch and 6-inch. This leads to the common question; “What is this size is actually referring to?” The answer is it’s the size of the inside diameter of the housing (aka “can”) with the trim or LED module removed.
How many LED recessed lights can I put on a 15 amp circuit?
Breaker Limitations Each CFL or LED bulb typically gives the same amount of light as a 60-watt incandescent bulb while drawing 10 watts or less, which is equivalent to a current draw of 1/12 amp. Thus a 15-amp circuit can safely control 180 or more fixtures that use CFL or LED bulbs.
How many recessed lights do you need in a room?
Whatever new recessed lighting you add should work with your existing fixtures. Measure your room to see how many fixtures you will need. A common rule of thumb is that you use one recessed light for every 4 to 6 square feet of ceiling space. Doing so provides even, overall illumination.
How many lights do I need for my room calculator?
Room Foot Candles Needed
——– ——————-
Bedroom 10-20
Hallway 5-10
Bathroom 70-80
How far apart should 6 inch recessed lights be?
about 6 feet
What is standard recessed lighting size?
The common sizes for residential recessed light fixtures are 4″ through 7″ in diameter. One way to answer this question is by considering how far the ceiling is from where you want the light, and how big an area you want to light. In an 8′ ceiling, a 4″ fixture can work well to provide kitchen countertop lighting.
How many recessed lights can you put on one switch?
The main limitation to the number of recessed fixtures you can run at the same time is the rating of the circuit breaker that controls the circuit. Each fixture with a 60-watt incandescent or halogen bulb draws about 1/2 amp, so a 15-amp breaker for a standard lighting circuit would be able to handle 30 of them.
Last Updated: 11 days ago – Co-authors : 11 – Users : 9