How do I turn off the maintenance required light on my Toyota Prius?

0
2559

– Hold in the brake and press the start until the car turns on. With the odometer displayed, not the trip meter, press and hold the ODO trip reset button. …
– Continue to hold in the ODO while turning car off and on with START while foot on brake. …
– The maintenance required light will be out.

Read the full answer

To reset the oil maintenance light press the display until it reads the odometer reading, turn the power switch off, press the power switch to ignition on while holding down the trip meter reset button, keep the trip reset button held down for about 10 seconds , the display will read 000000 and then the light will go …

Beside this, How do you reset the maintenance light on a 2014 Prius?

Likewise, How do you reset the maintenance required light on a 2005 Toyota Prius?

To reset the oil maintenance light press the display until it reads the odometer reading, turn the power switch off, press the power switch to ignition on while holding down the trip meter reset button, keep the trip reset button held down for about 10 seconds , the display will read 000000 and then the light will go …

Also, How do you turn off the check engine light on a 2006 Toyota Prius?

Turn the car off while still holding the ODO button and brake. While still pressing both brake and ODO, and press the power button one time to turn the car back on. When the dashes get all the way to the right, the odometer will flash 000000. Then it will turn back on and the lights will be reset.

Also Read  How far is Austin from Dallas by plane?

Can you reset check engine light without disconnecting battery?

You may also need to manually reset the light after making repairs if the code doesn’t clear automatically. The best way to reset a check engine light is to use a code scanner. However, if your vehicle was manufactured before 1996, you can simply disconnect the battery to reset the light.


24 Related Question Answers Found

 

How do I turn off the maintenance required light on my Prius?

– Hold in the brake and press the start until the car turns on. With the odometer displayed, not the trip meter, press and hold the ODO trip reset button. …
– Continue to hold in the ODO while turning car off and on with START while foot on brake. …
– The maintenance required light will be out.

How do you reset the maintenance light on a 2008 Toyota Prius?

– Push the start button to ACCESSORY MODE. Ignition ON Only.
– Press The ODO/TRIP BUTTON To Display To ODO. image for reference only.
– Then Turn The IGNITION To OFF.
– Press And Hold ODO/TRIP BUTTON And Push the start button to Accessory Mode/Ignition. …
– Then Turn The Ignition OFF.

How do you turn off the maintenance required light on a 2008 Toyota Prius?

– Push the start button to ACCESSORY MODE. Ignition ON Only.
– Press The ODO/TRIP BUTTON To Display To ODO. image for reference only.
– Then Turn The IGNITION To OFF.
– Press And Hold ODO/TRIP BUTTON And Push the start button to Accessory Mode/Ignition. …
– Then Turn The Ignition OFF.

Also Read  Is a mushroom an example of a decomposer?

How can I reset my check engine light myself?

Insert the key in the ignition, turn the car on for a second, and turn it off for another second. Repeat this process three times. Once you turned your car on/off three times, the check engine light should go away by itself.

How do you reset the maintenance required light on a 2015 Prius?

– Turn the ignition to the ON mode without starting the engine. …
– Press the TRIP button repeatedly until you see “TRIP A” on the display. …
– Next, turn OFF the ignition. …
– Press and hold the km/h MPH button while turning the POWER button to ON mode again.

How do you reset the maintenance light on a 2009 Prius?

Power off the car. 2) Push and hold down the ODM/TRIP button under the MFD , while holding that down slowly push the POWER button twice. Continue holding down the ODM/TRIP button and look at the odometer. It should flash and then display “——” in place of your milage.

How do you turn off the check engine light on a 2008 Toyota Prius?

Turn the car off while still holding the ODO button and brake. While still pressing both brake and ODO, and press the power button one time to turn the car back on. When the dashes get all the way to the right, the odometer will flash 000000. Then it will turn back on and the lights will be reset.

How do you reset the maintenance required light on a Prius?

To reset the “maintenance required” light on a toyota prius, press the power button twice, using the odo button below the multi-function display, press to cycle through and stop on the odo reading, press the power button once to power your prius down, press and hold down the odo button and press the power button twice …

Also Read  Is it bad to retake SAT Subject Tests?

How do you reset the maintenance required light on a Toyota Prius?

To reset the “maintenance required” light on a toyota prius, press the power button twice, using the odo button below the multi-function display, press to cycle through and stop on the odo reading, press the power button once to power your prius down, press and hold down the odo button and press the power button twice …

How do you reset the maintenance required button?

– Turn the key to the on position.
– Next, determine that the odometer reading is displayed. …
– Then turn the key back off.
– Now push and hold the reset button for the trip meters. …
– Finally, while continuing to depress the reset button, turn the key back to the “on” position, but not so far as the “start” position.

How do you shut off check engine light?

– 4 Ways to Turn off the “Check Engine” Light. Method. …
– Drive Your Car and Let the Light Go off by Itself. …
– Turn the Car on and off Three Times. …
– Disconnect and Reconnect the Battery. …
– Use an OBD Code Reader.

How do you reset the maintenance light on a 2013 Prius?


Last Updated: 12 days ago – Co-authors : 10 – Users : 9

LEAVE A REPLY

Please enter your answer!
Please enter your name here