– Bake your block. …
– Max out your weight at the regulation 5 ounces. …
– Use all of the graphite (dry lubricant is usually allowed). …
– Sand and polish your wheels and axles. …
– Check alignment. …
– Spend time on sanding. …
– Use a high-quality paint. …
– Add decals!
Should I bake the pinewood derby block? The short answer is no, do not bake the block. The idea behind baking the block is to remove moisture which will make the block lighter. You can then add more weight to the back of the car.
Beside this, How do you bake Pinewood Derby blocks?
1. Bake the Block: Start with your block of wood, and before you do anything else, bake it in the oven at 250 degrees for around two hours to remove moisture and make it lighter. This will allow you to place more weight to the rear of the Pinewood Derby car where you actually want it.
Likewise, Should I bake my Pinewood Derby block?
Should I bake the pinewood derby block? The short answer is no, do not bake the block. The idea behind baking the block is to remove moisture which will make the block lighter. You can then add more weight to the back of the car.
Also, Should you sand Pinewood Derby wheels?
Lightly Sanded BSA Wheels (Wheels must not be peaked, ‘H’ed, humped, tapered, or narrowed. The only work allowable to any wheel is to remove manufacturing defects such as burrs or injection flanges. Wheels may be sanded until the mold seam is removed.
What is a good time for a Pinewood Derby car?
Pinewood Derby Results. The average times with just weight added was 3.288 seconds. There was 0.188 seconds between the fastest and slowest car, about 23 inches. The average time was 2.994 seconds, about 44 inches faster than without graphite (0.353 seconds).
21 Related Question Answers Found
Can you put weights on the bottom of a Pinewood Derby car?
Sand and paint your block but do not add the wheels. When the paint has dried, mount the weight on the top of your car as far to the rear as possible. The weight should not extend past the rear of the car. Glue bottom weights to the bottom of the block to bring the total weight (including wheels and axles) to 5 oz.
How do you lubricate Pinewood Derby wheels?
Do you glue Pinewood Derby axles?
Create Glue Holes: Glue the axles firmly in their holes to ensure that they stay perfectly placed, but make sure you don’t get glue on your wheels. 8. Add Weight: Remember to make your Pinewood Derby car as heavy as the rules allow.
Should I glue Pinewood Derby axles?
Super Glue or CA glue is glue of choice for many years. Just remember this stuff is super runny or liquid, a little will go a long way and I have ruined many wheel sets because of this. Use just a few little drops of glue on your axle. And make sure your car is nice and flat so that it does not run into the wheel.
What makes a Pinewood Derby car go faster?
Aerodynamics have little effect in such a short race, but weight does and putting the weight at the back of the car will make your car faster on the flat of the track. Tungsten weights, in most cases, are best because of their high density. Lube the car at the body/wheel friction point.
Should I sand the wheels on a Pinewood Derby car?
Lightly Sanded BSA Wheels (Wheels must not be peaked, ‘H’ed, humped, tapered, or narrowed. The only work allowable to any wheel is to remove manufacturing defects such as burrs or injection flanges. Wheels may be sanded until the mold seam is removed.
How do you prepare Pinewood Derby wheels?
What do you use to polish Pinewood Derby axles?
Use polishing compound from the auto supply store to polish the wheels and axles. One easy way to do this is to clamp the axles back in the drill and let the drill spin the axle while you polish it.
How do you attach a Pinewood Derby axle?
What is the fastest time for a Pinewood Derby car?
Track Tests on our Pinewood derby Axles 409 seconds.
What is the Pinewood Derby world record?
606 yards
How do you smooth pinewood derby wheels?
Last Updated: 7 days ago – Co-authors : 7 – Users : 10