PopularAsk.net – Your Daily Dose of Knowledge

Can you use floor leveler under hardwood?

If you are nailing the hardwood floor in place, choose cementitious leveling compound that you can nail through. Use builder’s felt or shingles stapled to the floor to fill small low spots if you don’t want to wait for leveling compound to dry.

Read the full answer

If it is thicker than the hardwood floor boards, then you must shim the hardwood floor in order to create a perfectly flat and unnoticeable transition. The shimming raises the floor boards up to the same level as the tile so a threshold is not necessary, and the installation appears to be seamless.

Beside this, Can you use floor leveler on wood floors?

Self-Leveling Underlayment is an easy-to-use, cement-based underlayment that self-levels. Just mix it with water, pour and spread. The underlayment is excellent for smoothing and flattening interior surfaces before installing floor coverings. Use over concrete, wood, tile, terrazzo and cut back adhesive.

Likewise, What is best to put under hardwood floor?

The most basic underlayment is a plastic sheet that acts as a moisture barrier. In humid climates, pair a plastic sheet with all other types of underlayments, even those that already offer some moisture resistance. Dealing with warped or mildew-laden wood costs more than adding that extra layer of protection.

Also, Do I need an underlayment for hardwood floors?

Is underlayment necessary for hardwood floors. The short answer: usually. If you already have a plywood subfloor, and the subfloor is smooth and level, then you may not need an underlayment beneath the hardwood floor.

How do you fix uneven subfloor on hardwood floors?

Depending on the situation, you can either sand down areas of the subfloor that are too high, or install shims beneath the subfloor so that the entire floor is brought up to the same level.


24 Related Question Answers Found

 

Can self-leveling compound be used on wood floors?

Self-Leveling Underlayment is an easy-to-use, cement-based underlayment that self-levels. Just mix it with water, pour and spread. The underlayment is excellent for smoothing and flattening interior surfaces before installing floor coverings. Use over concrete, wood, tile, terrazzo and cut back adhesive.

Do I need underlayment for laminate flooring over hardwood?

Laminate flooring can be installed directly over hardwood, often with no preparation necessary. … If the new flooring does not have the built-in underlayer, simply roll out and tape your underlayment to the wood floor and begin installing the laminate.

Can you put hardwood on a slab?

With dry concrete and the right subfloors and vapor retarders, solid hardwood floors can be installed on slabs that are either on-grade (at ground level) or above-grade (above ground level). … Wood floors should not be subjected to very wet conditions.

Can you shim hardwood floors?

Shimming is an acceptable way to flatten a floor,but as with any job, make sure the extra labor and materials are factored into the overall bid. When using the shingle shimming technique, it is a fairly simple procedure but still requires extra labor.

Do I need underlayment for laminate flooring on plywood?

With a concrete subfloor, you will need an underlayment that acts as a vapor barrier in order to prevent moisture from penetrating through to your laminate installation. … Plywood subfloors: A breathable foam-type underlayment is generally used when installing laminate flooring over plywood or OSB subfloors.

Does underlayment help with uneven floors?

Only very small imperfections can be concealed using underlay. Underlay will not hide major flaws, and a floor that is uneven will need attention before you lay any laminate flooring. … The more even your floor, the better your final finish will be.

How do you level an uneven wood floor?

If the floor slants irregularly, cut strips that bridge the cap at each floor joist. Attach leveling strips. Use screws to secure the leveling strips to the floor every 16 inches. Screw the strips into the floor joists or subfloor.

Can you put laminate flooring over plywood?

Laminate floors can be installed directly over concrete, plywood, OSB, parquet, vinyl and tile. The underlayment must be applied to the original flooring surface first, and then the floating floor can be installed.

What kind of flooring can you put over wood floors?

Laminate flooring

What happens if you install laminate flooring without underlayment?

Underlayment for laminate flooring is a must. Since laminate is a floating floor, it must be evenly distributed across your subfloor. Underlayment is what allows the floor to float, gives it stability, support, noise reduction, and supports the locking systems in between planks to assure the sturdiest flooring project.

How do you fix an uneven floor before laying hardwood floors?

If you are nailing the hardwood floor in place, choose cementitious leveling compound that you can nail through. Use builder’s felt or shingles stapled to the floor to fill small low spots if you don’t want to wait for leveling compound to dry.

How do you level an existing subfloor?

Pour the liquid-like floor leveler onto the subfloor and smooth it out with a trowel. Gravity will help it settle into the low areas. Remove any excess floor leveler and feather it around the edges so it blends with the rest of the floor. Let the floor leveler dry overnight or as indicated by the manufacturer.


Last Updated: 19 days ago – Co-authors : 11 – Users : 11

Exit mobile version