PopularAsk.net – Your Daily Dose of Knowledge

Can you add more concrete to an existing slab?

Yes, you may pour a concrete pad overlay over an existing slab. … You need to consider the added height and weight of the overlay on the existing structure. Overlays may include polymers, portland cement concrete, or epoxies.

Read the full answer

If done properly, new concrete can often be poured right over an existing slab. For this to be feasible, the contractor needs to pour at least 2 inches thick, use smaller aggregate, and incorporate reinforcement such as welded wire mesh or fiber mixed into the concrete.

Beside this, Does concrete adhere to old concrete?

QUIKRETE® Concrete Bonding Adhesive (No. 9902) permanently bonds new concrete, plaster, and stucco to existing concrete, plaster, and stucco. Eliminates the need for roughing the surface before the application.

Likewise, Does concrete stick to old concrete?

QUIKRETE® Concrete Bonding Adhesive (No. 9902) permanently bonds new concrete, plaster, and stucco to existing concrete, plaster, and stucco. Eliminates the need for roughing the surface before the application.

Also, How do you get new concrete to stick to old concrete?

The most effective way to ensure a really good bond is with a scratch coat. This is simply a very wet coat made up by mixing the repair product with water. Mix up a small amount of the repair material to a soupy consistency. You don’t need to measure the water-just turn the stuff into slop.

Can you add more concrete to existing concrete?

If done properly, new concrete can often be poured right over an existing slab. For this to be feasible, the contractor needs to pour at least 2 inches thick, use smaller aggregate, and incorporate reinforcement such as welded wire mesh or fiber mixed into the concrete.


16 Related Question Answers Found

 

Can you put concrete over old concrete?

If the existing concrete is in good shape structurally, you can pour new concrete over it to freshen it up. Worn or cracking concrete makes your outdoor areas look drab, outdated and in need of fresh concrete. … If the existing concrete is in good shape structurally, you can pour new concrete over it to freshen it up.

How do you stick new concrete to old concrete?

The most effective way to ensure a really good bond is with a scratch coat. This is simply a very wet coat made up by mixing the repair product with water. Mix up a small amount of the repair material to a soupy consistency. You don’t need to measure the water-just turn the stuff into slop.

How do you attach concrete to old concrete?

– Drill 5/8-inch diameter holes six inches deep into the old concrete. …
– Flush the holes with water.
– Inject epoxy into the backs of the holes. …
– Insert 12-inch lengths of rebar into the holes, twisting them to ensure an even coating of epoxy around their circumferences and along their lengths within the holes.

What do you use to bond concrete to concrete?

QUIKRETE® Concrete Bonding Adhesive (No. 9902) permanently bonds new concrete, plaster, and stucco to existing concrete, plaster, and stucco. Eliminates the need for roughing the surface before the application.

Can you pour concrete in two stages?

Generally—yes. If you know you are going to have a “cold joint” as you described, leave the surface rough—the best technique is to make a key way at the joining surface by using a length of 2×2 or 2×4 to form a key way when you do the first pour–remove the 2x before you do the second pour.

How do you pour a new concrete slab over an old concrete slab?

How long can you wait between concrete pours?

about two hours

Can you pour concrete in two pours?

Generally—yes. If you know you are going to have a “cold joint” as you described, leave the surface rough—the best technique is to make a key way at the joining surface by using a length of 2×2 or 2×4 to form a key way when you do the first pour–remove the 2x before you do the second pour.

Can you pour concrete on top of existing concrete?

If done properly, new concrete can often be poured right over an existing slab. … For this to be feasible, the contractor needs to pour at least 2 inches thick, use smaller aggregate, and incorporate reinforcement such as welded wire mesh or fiber mixed into the concrete.

Does concrete stick to concrete?

QUIKRETE® Concrete Bonding Adhesive is designed to bond new concrete to existing concrete.

What will stick to concrete?

However, if you use the correct formula of glue, nearly anything will stick to concrete. You will have best results with rougher materials, such as additional concrete, wood, cloth or plastic, but nearly anything will stick to concrete with the right glue.

Can you pour concrete in layers?

There are situations when pouring new concrete isn’t the most suitable option. For instance, surfaces with larger cracks, heaving or settling conditions, or where height cannot be raised, replacement is a better solution. However, in most cases, you can pour a new layer of concrete onto the existing one.


Last Updated: 20 days ago – Co-authors : 16 – Users : 5

Exit mobile version