PopularAsk.net – Your Daily Dose of Knowledge

Are all toilet cisterns the same size?

Dimensions: Low level cisterns are on average 455mm wide, 350mm high, and project 230mm from the wall. Larger and smaller sizes are also available.

Read the full answer

Cistern size For example, if you have determined your annual domestic water needs to be 40,000 gallons (and, most importantly, you have enough catchment area and annual precipitation to supply this amount of water), then you should design and build a cistern with a 10,000-gallon storage capacity.

Beside this, How many gallons is a 36x18x18 tank?

Dimensions (LxWxH) Volume in US gallons/type Volume in Liters
———————– ————————- —————-
48x13x16″ (120x33x40cm) 40 long 151
36x12x24″ (90x30x60cm) 45 170
36x18x18″ (90x45x45cm) 50 189
48x13x20″ (120x33x50cm) 55 208

Likewise, What size water tank do I need for a family of 4?

The answer to this question will vary depending on the total number of kids you have. For example, a family of 3 to 4 people should purchase a 50 – 60 gallon water heater. On the other hand, a household with 5 – 7 people may require a water heater with a 60 – 80 gallon water tank.

Also, How many Litres is a 3ft fish tank?

120 Litres

Do all toilet tanks fit all toilets?

Toilet tank sizes vary depending on the type of toilet you have. Toilets come with one of three flushing systems; dual flush, gravity, and pressure-assisted. Generally, toilet tank sizes are universal within these flushing system categories, unless you have a custom toilet.


23 Related Question Answers Found

 

How many gallons is a 3ft tank?

How do I know what toilet tank to buy?

Finding your toilet manufacturer and/or model number: Carefully remove the toilet tank lid and set it gently on the floor, with the bottom facing up. Look for the manufacturer name or a number on the bottom side of the water tank lid.

Are all toilet cisterns the same?

There are several different types of toilet cisterns but essentially they all do the same thing. Our cistern range includes both concealed and exposed varieties.

How do you figure out how many gallons are in a tank?

For example, if you have a tank that is 12 inches in diameter and 20 inches high, the calculation looks like this: Divide the cubic volume in inches by 231 in order to find the number of gallons.

How many Litres is a 2ft fish tank?

Well, I tried two different calculators and got about the same volume results…about 56 liters (15 U.S. gallons).

Are all toilet tanks standard size?

Tanks come in a few different sizes, and one of them is small. Small tanks vary in size; however, one standard length is 15 1/8 inches. It is common to see these tanks on toilets with bowls and seats of a similar size.

Will any tank fit any toilet?

Any tank should fit your bowl but you may have to adjust where it hangs on the wall and you may have to cut the supply line to the toilet bowl itself.

How many gallons is a 4 ft long fish tank?

Volume – 4*1*1.75= 7 cubic feet. There are appox. 7.48 gallons for each cubic foot.

How many gallons is a 2ft tank?

15-25 gallons

What size is a 200 Litre fish tank?

around six square feet

Is 40 gallon water heater enough for a family of 4?

Typically, the rule-of-thumb is that you want a 40 gallon tank for 1 to 4 people, a 50 gallon tank for 4 to 6 people, and a 50 gallon high recovery or 75 gallon tank for 6 to 8 people. Energy consumption for 40 and 50 gallon standard water heaters is quite comparable.

Are toilet tanks Universal?

When asking the question is a toilet tank universal, the short answer is no. While in certain brands they can be interchangeable, the overall consensus is that your toilet tank is fitted to your toilet model.


Last Updated: 12 days ago – Co-authors : 10 – Users : 4

Exit mobile version