- While Generlink is not yet approved in all areas of Canada, this is changing.
- The unit gets installed underneath your electrical meter, offering a port on its bottom edge to accept a special cable.
- This cable connects the generator to the Generlink, creating a system that’s more than just safe; it’s also smart.
Thus, What is a Genlink? GenerLinkTM is an interconnection device that enables you to connect your portable generator directly to your home’s wiring system. During a power outage, your generator becomes your source of emergency back-up power. GenerLinkTM is designed as an alternative to expensive transfer switches and hazardous extension cords.
Additionally Does Nova Scotia Power install GenerLink? This setup includes the GenerLinkTM, Nova Scotia Power Permits and Inspections, with Basic installation.
How does a meter mounted transfer switch work? After our serviceman installs the transfer switch between the meter and the meter base, the homeowner can plug in the power supply cable directly from the generator to the switch for use when service is disrupted. The switch enables electricity from the generator to power your home.
How much is a Genlink? The GenerLink system is available starting at a cost of $1,344 for a 30 AMP GenerLink with a 20′ Cord – cost will vary based on material costs and if an additional cord length is required. It is installed and maintained by EQUS for a monthly fee of $12.67, which covers maintenance and replacement costs.
What happens to a generator when the power comes back on?
If power is restored while your generator is backfeeding, it may severely damage the generator. Avoid backfeeding by always keeping generator power and Energex or Ergon Energy electrical system isolated from each other.
How do you know power is back on with GenerLink?
There are four indicator lights on the GenerLinkTM device. If the green light is illuminated, this represents a normal condition where utility power is present. When your utility has restored power you can de-energize and disconnect your generator from the GenerLinkTM device.
Are GenerLink safe?
a. GenerLink is designed to function as an interconnection device and serves to connect your generator to your home. There is no risk damage to your appliances created by the GenerLink device. You should exercise care when selecting your generator to ensure you are buying a high quality generator.
Can you test GenerLink with power on?
The GenerLink will not transfer to the generator during testing with utility power present. GenerLink will not continuously connect the generator to the loads or it periodically cycles the loads on and off.
What does a GenerLink do?
GenerLinkTM is an interconnection device that enables you to connect your portable generator directly to your home’s wiring system. During a power outage, your generator becomes your source of emergency back-up power. GenerLinkTM is designed as an alternative to expensive transfer switches and hazardous extension cords.
How do I install GenerLink?
What should you not do with a generator?
10 Mistakes Not to Make with a Home Generator
- Consistent and Reliable Power Means Proper Maintenance. …
- Using the Wrong Extension Cord. …
- Running the Generator in Enclosed Spaces. …
- Using Poor Quality Fuel. …
- Powering On and Off Incorrectly. …
- Connecting to the Service Panel. …
- Fueling up While Operating.
Should you turn your generator off at night?
The most serious risk of running a generator all night is carbon monoxide poisoning. Because of its nature, a portable generator emits carbon monoxide when its engine is turned on.
Do you plug into a generator before or after you start it?
Before starting the generator, disconnect all cords. You should start your generator before connecting it to your home. You don’t want any load attached during the startup.
How big a generator do I need to run my house?
How Big of a Generator Do I Need to Run a House? With a generator rated at 5,000 to 7,500 watts, you can run even the most critical household equipment, including things such as refrigerator, freezer, well pump, and lighting circuits. A 7500-running watt generator can run all these appliances at once.
Can you test a GenerLink with utility power?
The GenerLink will not transfer to the generator during testing with utility power present. GenerLink will not continuously connect the generator to the loads or it periodically cycles the loads on and off.
How do you plug a generator into your house?
You simply plug the gen cord into the 20- or 30-amp outlet on your generator. The opposite end splits into several household outlets, where you can start connecting additional extension cords safely indoors.
How big of a generator do I need for a 2000 sq ft house?
What Size Generator Do I Need To Run A 2000 Sq Ft House? Bring at least a 1000KWh generator for your 2000 sqft house, counting per month, which means a 32KWh for per day.
Are inverter generators better?
Although inverter generators can’t produce as much power as conventional generators, they are more efficient due to how the energy how the AC current is produced.
How do you hook up a generator to a house without a transfer switch?
How to Connect Generator to House without Transfer Switch
- Step 1: Create a Place for the Outlet Utility Box.
- Step 2: Drill a Hole for Running Your Generator Cables to the Outlet.
- Step 3: Install the Waterproof Box Outside Your Wall.
- Step 4: Connect the Wire Into the Outlet.
- Step 5: Connect Generator to Outlet and Test it.
Do you have to turn off your main breaker when using a generator?
You typically will need to turn the circuit breaker off and turn the fuel valve on before starting it up. Give the machine a few minutes to warm up, then flip the circuit breaker on. Use long, heavy-duty extension cords made for outdoor use to connect appliances to the generator one by one so as not to overload it.
Can you plug a generator into your house outlet?
A generator should not be plugged into a wall socket. While it is physically possible to do so, there are substantial risks involved. Not only is it illegal in some areas, but permanent damage could also be done to the home’s electrical system by way of backfeeding.
Do you have to turn off the main breaker when using a transfer switch?
Your owner’s manual will have detailed instructions on using your transfer switch properly. Be sure to review it thoroughly before use. When the utility power goes out: Turn off all the circuit breakers in the transfer switch to the off position.
