A transit bolt, also called a washer shipping bolt, is installed through the back a washing machine to keep the tub from moving around during shipping. … In many cases when the washer was delivered and set up, the delivery crew will give you the bolts once they have been removed from the washer.
The transit bolts need to be removed when the appliance is being installed. They are designed to hold the drum in a fixed position while being transported. Failure to remove this will void the warranty, so please refer to the appliance manual for additional guidance.
Beside this, How do you remove transit bolts?
Likewise, Why do washing machines have transit bolts?
A transit bolt, also called a washer shipping bolt, is installed through the back a washing machine to keep the tub from moving around during shipping. … In many cases when the washer was delivered and set up, the delivery crew will give you the bolts once they have been removed from the washer.
Also, How do you remove transport bolts?
What happens if you don’t remove transit bolts from washing machine?
Transit bolts are a type of bolt used to secure part of a mechanical appliance during transit. … The drum of a washing machine is weighted and would damage the electronic internals if it were to swing into them while being transported. Failing to remove transit bolts before using the machine can also damage the machine.
17 Related Question Answers Found
Can I move a washing machine without the transit bolts?
Moving a washing machine without transit bolts will run the serious risk of damaging your machine, so we strongly advise against it. … However, you must remember to remove the transit bolts once your move is complete, as they can seriously damage your machine should you begin a wash cycle with them still in place.
Can you transport washing machine lying down?
Yes you can. But take precautions lest you damage the WM. Like a refrigerator (also a household equipment), it’s recommended you move a washing machine stood upright. If extreme conditions don’t permit, transport it laid on either of the sides which don’t have protruding water pipes.
Can you move a front load washer without the shipping bolts?
In general, there is no problem transporting these machines provided they’re upright. If you don’t have the transport bolts/braces, just move it gently and don’t drive aggressively over bumps. I cannot stress how important it is to keep the machine upright at all times.
Do washing machines come with transit bolts?
You can do this by securing the drum with shipping bolts or transit bolts. These metal rods are inserted into special slots in the rear of the washer to secure the drum. Most washer brands come with shipping bolts or washer locks and you can usually get replacements online.
Do you have to remove transit bolts from washing machine?
Washing machines are packaged with bolts to secure it to the packaging and prevent any damage to the inside of the washing machine during transit to your home. Failure to remove all the shipping bolts causes the washing machine to make excessive noise or vibrate abnormally when in use.
Do all new washing machines have transit bolts?
Normally when you get your new washing machine there will be two (rare), three or four transit bolts fitted through the rear panel of the washing machine that fix to the outer tank of the washing machine. These bolts “lock” the drum unit in place stopping it from moving.
Are shipping bolts necessary?
The shipping bolts keep the tub secure during a move and reduce the amount of vibration that could cause damage to the suspension. Before installing the washing machine, it is required that you remove all shipping bolts from the back of the unit.
Is it OK to transport a dryer laying down?
It does not harm the dryer to lay it on its side or back during transporting. Exception: Unitized washer/dryer models should only be transported / moved in an upright position. Do not lay on side or back.
How do you transport a washing machine?
The safest way to move a washer is by transporting it in an upright position. Due to the height and awkward shape of most washing machines, a dolly is recommended to get your washing machine off the ground and through any obstacles, be they a flight of stairs or up inside a truck.
How do you transport a top loader washing machine?
Secure your machine to the dolly with bungee cords or strong rope and tape down any latches and doors just to be safe. When it’s time to get your washing machine into your moving vehicle, keep it wrapped in blankets in the back of a truck to prevent possible dents, dings or scratches during transport.
How do you remove a transit bolt from a washing machine?
What happens if you move washer without shipping bolts?
Moving a washing machine without transit bolts will run the serious risk of damaging your machine, so we strongly advise against it. However, you must remember to remove the transit bolts once your move is complete, as they can seriously damage your machine should you begin a wash cycle with them still in place.
Last Updated: 4 days ago – Co-authors : 9 – Users : 6
